[Tue May 28 14:31:07 2013] Detection parameters:
  Position = (219.5, 135.1) = 21 37 29.19 -63 18 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 19.6
  Background counts = 120.4
  Rate = 0.001 +/- 0.0002

[Tue May 28 14:31:07 2013] Off-axis axis estimate = 13.15'
[Tue May 28 17:00:40 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue May 28 17:00:40 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Tue May 28 17:00:40 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Tue May 28 17:00:40 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.00"
[Tue May 28 18:24:53 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32.ximg exists
[Tue May 28 18:24:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32.csv
[Tue May 28 18:24:53 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue May 28 18:24:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32.csv
[Tue May 28 18:24:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:24:53 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue May 28 18:24:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue May 28 18:24:53 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue May 28 18:24:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue May 28 18:24:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:25:13 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.445159 pixels away
[Tue May 28 18:25:13 2013] Vigneting correction estimate = 1.000000
[Tue May 28 18:25:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 18:25:13 2013] Assessing source extent using major
[Tue May 28 18:25:13 2013] Source does appear to be extended
[Tue May 28 18:25:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 20:40:25 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue May 28 20:40:25 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Tue May 28 20:40:25 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Tue May 28 20:40:25 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 13.00"
[Tue May 28 21:54:34 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31.ximg exists
[Tue May 28 21:54:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31.csv
[Tue May 28 21:54:34 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue May 28 21:54:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31.csv
[Tue May 28 21:54:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:54:35 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue May 28 21:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue May 28 21:54:35 2013] fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue May 28 21:54:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue May 28 21:54:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:54:54 2013] Source 23 is offset by 3.693573 and -8.317019 pixels which is larger than
2 X fitted extent = 3.301379 x 3.301379, not incorporating fit results
[Tue May 28 21:54:54 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:54:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:54:54 2013] Assessing source extent using major
[Tue May 28 21:54:54 2013] Source does appear to be extended
[Tue May 28 21:54:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 00:29:34 2013] XMMSAS src. selection expression = ellipse(19050.540863, 11703.789383, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 00:29:34 2013] Writing source region out to fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_src.reg
[Wed May 29 00:29:34 2013] Extracting stamp from image fullrun_mos1_xmm0675010301_pi300-10000_cl_sm2.00.img.gz, (182, 98) - (257, 173)
[Wed May 29 00:29:34 2013] XMMSAS bgd. selection expression = annulus(19050.540863, 11703.789383, 1087.500000, 2175.000000, X, Y) && !ellipse(17132.736206, 10241.061394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16362.978165, 10755.926003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17697.410492, 10378.607841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18272.386292, 11183.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21495.549377, 10492.248405, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 00:29:34 2013] Writing fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23.gif
[Wed May 29 00:43:41 2013] Mean detx,y = (13573.95, -6345.49) 
[Wed May 29 00:43:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 00:44:04 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 00:44:05 2013] Setting source spectrum file to fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 29 00:44:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 29 01:46:05 2013] Not generating rmf since there are only 98 counts
[Wed May 29 01:46:05 2013] rmf not generated due to insufficient counts
[Wed May 29 01:50:27 2013] Updating aperture counts using extracted products
[Wed May 29 01:50:28 2013] Total counts from fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 330.00
[Wed May 29 01:50:28 2013] Total counts from fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1508.00
[Wed May 29 01:50:28 2013] Got source and background scale factors 1272540.000000, 6102760.000000
[Wed May 29 01:50:28 2013] User source parameters:
  Position = (219.5, 135.1) = 21 37 29.19 -63 18 56.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 15.6 +/- 19.2
  Background aperture counts = 314.4
  Rate = 0.0002 +/- 0.0002

[Wed May 29 01:50:28 2013] Updating counts from extracted products
[Wed May 29 01:50:28 2013] Set source signif. to 15.55/17.73 = 0.88
[Wed May 29 01:50:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 01:50:30 2013] Using photon index=1.80, rate=0.000186, arf fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23.arf
[Wed May 29 01:50:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 01:50:31 2013] Updating source flux to 4.9e-15
[Wed May 29 01:50:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 01:50:49 2013] xmm0675010301/analysis//spectral/fullrun_mos1_xmm0675010301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete