[Fri Aug 17 09:09:26 2012] Detection parameters:
  Position = (165.3, 325.8) = 2 6 47.10 -58 26 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 14.0
  Background counts = 29.7
  Rate = 0.002 +/- 0.0003

[Fri Aug 17 09:09:26 2012] Off-axis axis estimate = 9.86'
[Fri Aug 17 10:10:24 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:10:24 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Fri Aug 17 10:10:24 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Fri Aug 17 10:10:24 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.36"
[Fri Aug 17 11:00:55 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Aug 17 11:00:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 17 11:00:55 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Aug 17 11:00:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 17 11:00:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:00:55 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Aug 17 11:00:55 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Aug 17 11:00:56 2012] Fit fullrun_mos1_xmm0675010101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Aug 17 11:50:08 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.171975 pixels away
[Fri Aug 17 11:50:08 2012] Spatial fit model total counts = 355.999000, observed total counts = 356.000000
[Fri Aug 17 11:50:08 2012] Offset between fit and detection position for source 16 = 0.221560 pixels
[Fri Aug 17 11:50:08 2012] 361.325400 total counts/ 290.069000 bgd. counts: snr = 4.183822
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.221560 pixels
  Position = (165.2, 325.6) = 2 6 47.15 -58 26 33.4
  Extent = 6.8 (4.9-10.1)", rotation angle = 0
  Source counts = 71.3 +/- 19.0
  Background counts = 290.1
  Rate = 0.001 +/- 0.0003
[Fri Aug 17 11:50:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:50:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:50:08 2012] Source does appear to be extended
[Fri Aug 17 11:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:51:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:51:17 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Fri Aug 17 12:51:17 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Fri Aug 17 12:51:17 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.78"
[Fri Aug 17 13:33:33 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_src15.ximg exists
[Fri Aug 17 13:33:33 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Aug 17 13:33:33 2012] Fit fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_src15 appears to have run properly
[Fri Aug 17 13:33:34 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Aug 17 13:33:34 2012] fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Aug 17 13:33:34 2012] Fit fullrun_mos1_xmm0675010101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Aug 17 14:24:03 2012] Spatial fit model total counts = 355.997000, observed total counts = 356.000000
[Fri Aug 17 14:24:03 2012] Offset between fit and detection position for source 16 = 0.007415 pixels
[Fri Aug 17 14:24:03 2012] 361.358500 total counts/ 291.339000 bgd. counts: snr = 4.102227
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.007415 pixels
  Position = (165.2, 325.6) = 2 6 47.15 -58 26 33.4
  Extent = 6.6 (4.9-10.2)", rotation angle = 0
  Source counts = 70.0 +/- 19.0
  Background counts = 291.3
  Rate = 0.001 +/- 0.0003
[Fri Aug 17 14:24:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 14:24:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 14:24:03 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 14:24:03 2012] Source does appear to be extended
[Fri Aug 17 14:24:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 15:35:50 2012] XMMSAS src. selection expression = ellipse(14324.163640, 28276.978600, 398.087411, 398.087411, 0.000000, X, Y)
[Fri Aug 17 15:35:50 2012] Writing source region out to fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16_src.reg
[Fri Aug 17 15:35:50 2012] Extracting stamp from image fullrun_mos1_xmm0675010101_pi300-10000_cl_sm2.00.img.gz, (142, 303) - (188, 348)
[Fri Aug 17 15:35:50 2012] XMMSAS bgd. selection expression = annulus(14324.163640, 28276.978600, 663.479019, 1326.958038, X, Y) && !ellipse(12634.643820, 27332.993800, 391.061611, 391.061611, 0.000000, X, Y) && !ellipse(12595.389374, 28567.413727, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 15:35:50 2012] Writing fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16.gif
[Fri Aug 17 15:39:49 2012] Mean detx,y = (4210.13, 9037.14) 
[Fri Aug 17 15:39:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 15:39:59 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 15:40:00 2012] Setting source spectrum file to fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug 17 15:40:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Aug 17 16:00:35 2012] Not generating rmf since there are only 70 counts
[Fri Aug 17 16:00:35 2012] rmf not generated due to insufficient counts
[Fri Aug 17 16:40:58 2012] Updating aperture counts using extracted products
[Fri Aug 17 16:40:58 2012] Error reading totcts from fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug 17 16:40:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 16:40:59 2012] Using photon index=1.80, rate=0.00102, arf fullrun_mos1_xmm0675010101_pi300-10000_pass1_cl_src16.arf
[Fri Aug 17 16:40:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 16:40:59 2012] Updating source flux to 1.7e-14
[Fri Aug 17 16:41:02 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting