[Tue Jun 18 20:54:29 2013] Detection parameters:
  Position = (331.3, 426.1) = 16 26 25.69 35 13 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3596.2 +/- 76.2
  Background counts = 20.5
  Rate = 0.3 +/- 0.006

[Tue Jun 18 20:54:29 2013] Off-axis axis estimate = 9.56'
[Tue Jun 18 20:55:57 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 20:55:57 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Tue Jun 18 20:55:57 2013] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.845
[Tue Jun 18 20:55:57 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.21"
[Tue Jun 18 21:35:41 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 18 21:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9.csv
[Tue Jun 18 21:35:41 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 18 21:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9.csv
[Tue Jun 18 21:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 21:35:42 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 18 21:35:42 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 18 21:35:42 2013] Fit fullrun_pn_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jun 18 22:02:31 2013] Spatial fit model total counts = 3599.590000, observed total counts = 3359.000000
[Tue Jun 18 22:02:31 2013] Offset between fit and detection position for source 10 = 0.522441 pixels
[Tue Jun 18 22:02:31 2013] 3597.194000 total counts/ 606.364000 bgd. counts: snr = 121.457692
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.522441 pixels
  Position = (330.9, 426.4) = 16 26 25.82 35 13 41.4
  Extent = 9.5 (9.5-9.6)", rotation angle = 0
  Source counts = 2990.8 +/- 60.0
  Background counts = 606.4
  Rate = 0.3 +/- 0.006
[Tue Jun 18 22:02:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:02:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:02:31 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 22:02:31 2013] Source does appear to be extended
[Tue Jun 18 22:02:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:02:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:02:45 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Tue Jun 18 22:02:45 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.897
[Tue Jun 18 22:02:45 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.54"
[Tue Jun 18 22:41:11 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 18 22:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9.csv
[Tue Jun 18 22:41:11 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 18 22:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9.csv
[Tue Jun 18 22:41:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:41:11 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 18 22:41:11 2013] fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 18 22:41:11 2013] Fit fullrun_pn_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jun 18 23:07:08 2013] Spatial fit model total counts = 3659.990000, observed total counts = 3359.000000
[Tue Jun 18 23:07:08 2013] Offset between fit and detection position for source 10 = 0.062525 pixels
[Tue Jun 18 23:07:08 2013] 3651.564000 total counts/ 944.504000 bgd. counts: snr = 88.083788
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.062525 pixels
  Position = (330.9, 426.5) = 16 26 25.82 35 13 41.6
  Extent = 7.5 (7.2-7.9)", rotation angle = 0
  Source counts = 2707.1 +/- 60.4
  Background counts = 944.5
  Rate = 0.3 +/- 0.006
[Tue Jun 18 23:07:08 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 23:07:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 23:07:08 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 23:07:08 2013] Source does appear to be extended
[Tue Jun 18 23:07:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 23:07:18 2013] Counts = 2707.060000, rescaling region sizes by 2.000000
[Tue Jun 18 23:07:18 2013] XMMSAS src. selection expression = ellipse(28742.136100, 37057.172200, 904.449626, 904.449626, 0.000000, X, Y)
[Tue Jun 18 23:07:18 2013] Writing source region out to fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 18 23:07:18 2013] Extracting stamp from image fullrun_pn_xmm0674811001_pi300-10000_cl_sm2.00.img.gz, (279, 375) - (383, 478)
[Tue Jun 18 23:07:18 2013] XMMSAS bgd. selection expression = annulus(28742.136100, 37057.172200, 3014.832087, 6029.664174, X, Y) && !ellipse(28066.895569, 33045.317108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22533.519806, 39330.228119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31971.536180, 31174.433200, 557.353962, 557.353962, 0.000000, X, Y)
[Tue Jun 18 23:07:18 2013] Writing fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10.gif
[Tue Jun 18 23:12:24 2013] Mean detx,y = (-10438.46, 8101.26) 
[Tue Jun 18 23:12:26 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 23:14:07 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 23:14:07 2013] Setting source spectrum file to fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 18 23:14:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 19 00:03:01 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:03:01 2013] Total counts from fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 3507.00
[Wed Jun 19 00:03:01 2013] Total counts from fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_bgd.pi.gz = 4049.00
[Wed Jun 19 00:03:02 2013] Got source and background scale factors 2530715.000000, 78222768.000000
[Wed Jun 19 00:03:02 2013] User source parameters:
  Position = (330.9, 426.5) = 16 26 25.82 35 13 41.6
  Extent = 7.5 (7.2-7.9)", rotation angle = 0
  Source aperture counts = 3376.0 +/- 60.2
  Background aperture counts = 131.0
  Rate = 0.4 +/- 0.006

[Wed Jun 19 00:03:05 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:03:05 2013] Using photon index=1.80, rate=0.281, arf fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10.arf
[Wed Jun 19 00:03:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:03:05 2013] Updating source flux to 2.5e-12
[Wed Jun 19 00:03:15 2013] xmm0674811001/analysis//spectral/fullrun_pn_xmm0674811001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete