[Tue Jun 18 20:54:59 2013] Detection parameters:
  Position = (134.8, 175.9) = 16 27 35.23 34 55 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 9.1
  Background counts = 12.1
  Rate = 0.003 +/- 0.0007

[Tue Jun 18 20:54:59 2013] Off-axis axis estimate = 14.82'
[Tue Jun 18 21:43:17 2013] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 21:43:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 21:43:17 2013] Initial guess for spatial extent in simple fitting = 13.84"
[Tue Jun 18 21:43:17 2013] source mask rpix=3.2, npix_max = 54, mask sum = 51, frac = 0.941
[Tue Jun 18 21:43:17 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.84"
[Tue Jun 18 22:02:26 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 18 22:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13.csv
[Tue Jun 18 22:02:26 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 18 22:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13.csv
[Tue Jun 18 22:02:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:02:26 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 18 22:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jun 18 22:02:26 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 18 22:02:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jun 18 22:02:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:02:35 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.626465 pixels away
[Tue Jun 18 22:02:35 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:02:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:02:35 2013] Assessing source extent using major
[Tue Jun 18 22:02:35 2013] Source does appear to be extended
[Tue Jun 18 22:02:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:53:40 2013] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:53:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 22:53:40 2013] Initial guess for spatial extent in simple fitting = 13.84"
[Tue Jun 18 22:53:40 2013] source mask rpix=3.2, npix_max = 54, mask sum = 51, frac = 0.941
[Tue Jun 18 22:53:40 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 13.84"
[Tue Jun 18 23:07:03 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jun 18 23:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12.csv
[Tue Jun 18 23:07:03 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jun 18 23:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12.csv
[Tue Jun 18 23:07:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 23:07:03 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jun 18 23:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jun 18 23:07:03 2013] fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jun 18 23:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jun 18 23:07:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 23:07:11 2013] Spatial fit model total counts = 109.407000, observed total counts = 61.000000
[Tue Jun 18 23:07:11 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 23:07:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 23:07:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 23:07:11 2013] Assessing source extent using major
[Tue Jun 18 23:07:11 2013] Source does appear to be extended
[Tue Jun 18 23:07:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 23:53:08 2013] XMMSAS src. selection expression = ellipse(11678.236053, 15250.623108, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 23:53:08 2013] Writing source region out to fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 18 23:53:08 2013] Extracting stamp from image fullrun_mos2_xmm0674811001_pi300-10000_cl_sm2.00.img.gz, (97, 138) - (172, 213)
[Tue Jun 18 23:53:08 2013] XMMSAS bgd. selection expression = annulus(11678.236053, 15250.623108, 1087.500000, 2175.000000, X, Y)
[Tue Jun 18 23:53:08 2013] Writing fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11.gif
[Tue Jun 18 23:57:48 2013] Mean detx,y = (-16520.56, -2578.18) 
[Tue Jun 18 23:57:49 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 23:58:05 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 23:58:05 2013] Setting source spectrum file to fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 18 23:58:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun 19 00:02:33 2013] Not generating rmf since there are only 39 counts
[Wed Jun 19 00:02:33 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:03:08 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:03:08 2013] Total counts from fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 45.00
[Wed Jun 19 00:03:08 2013] Total counts from fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 155.00
[Wed Jun 19 00:03:08 2013] Got source and background scale factors 1040524.000000, 6091574.000000
[Wed Jun 19 00:03:08 2013] User source parameters:
  Position = (134.8, 175.9) = 16 27 35.23 34 55 30.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18.5 +/- 7.8
  Background aperture counts = 26.5
  Rate = 0.002 +/- 0.0007

[Wed Jun 19 00:03:08 2013] Updating counts from extracted products
[Wed Jun 19 00:03:08 2013] Set source signif. to 18.52/5.15 = 3.60
[Wed Jun 19 00:03:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:03:08 2013] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11.arf
[Wed Jun 19 00:03:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:03:08 2013] Updating source flux to 4.7e-14
[Wed Jun 19 00:03:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:03:12 2013] xmm0674811001/analysis//spectral/fullrun_mos2_xmm0674811001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete