[Tue Jun 18 20:54:46 2013] Detection parameters:
  Position = (322.6, 140.3) = 16 26 28.82 34 52 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.4 +/- 13.0
  Background counts = 17.3
  Rate = 0.007 +/- 0.001

[Tue Jun 18 20:54:46 2013] Off-axis axis estimate = 11.60'
[Tue Jun 18 21:35:42 2013] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 21:35:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 21:35:42 2013] Initial guess for spatial extent in simple fitting = 12.23"
[Tue Jun 18 21:35:42 2013] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.889
[Tue Jun 18 21:35:42 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.23"
[Tue Jun 18 21:43:17 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun 18 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4.csv
[Tue Jun 18 21:43:17 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun 18 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4.csv
[Tue Jun 18 21:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 21:43:17 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun 18 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 18 21:43:17 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun 18 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 18 21:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674811001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:02:32 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.768533 pixels away
[Tue Jun 18 22:02:32 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:02:32 2013] Assessing source extent using major
[Tue Jun 18 22:02:32 2013] Source does appear to be extended
[Tue Jun 18 22:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:41:11 2013] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:41:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 22:41:11 2013] Initial guess for spatial extent in simple fitting = 12.23"
[Tue Jun 18 22:41:11 2013] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.889
[Tue Jun 18 22:41:11 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.23"
[Tue Jun 18 22:53:40 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jun 18 22:53:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4.csv
[Tue Jun 18 22:53:40 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jun 18 22:53:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4.csv
[Tue Jun 18 22:53:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:53:40 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun 18 22:53:40 2013] fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun 18 22:53:40 2013] Fit fullrun_mos1_xmm0674811001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jun 18 23:07:09 2013] Spatial fit model total counts = 160.311000, observed total counts = 145.000000
[Tue Jun 18 23:07:09 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 23:07:09 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 23:07:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 23:07:09 2013] Assessing source extent using major
[Tue Jun 18 23:07:09 2013] Source does appear to be extended
[Tue Jun 18 23:07:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 23:42:07 2013] XMMSAS src. selection expression = ellipse(28013.895874, 12156.927216, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 23:42:07 2013] Writing source region out to fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun 18 23:42:07 2013] Extracting stamp from image fullrun_mos1_xmm0674811001_pi300-10000_cl_sm2.00.img.gz, (285, 103) - (360, 178)
[Tue Jun 18 23:42:07 2013] XMMSAS bgd. selection expression = annulus(28013.895874, 12156.927216, 1087.500000, 2175.000000, X, Y)
[Tue Jun 18 23:42:07 2013] Writing fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5.gif
[Tue Jun 18 23:44:50 2013] Mean detx,y = (10487.60, 5912.65) 
[Tue Jun 18 23:44:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 23:45:05 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 23:45:05 2013] Setting source spectrum file to fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 18 23:45:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 18 23:52:51 2013] Not generating rmf since there are only 99 counts
[Tue Jun 18 23:52:51 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:03:05 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:03:05 2013] Total counts from fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 117.00
[Wed Jun 19 00:03:05 2013] Total counts from fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 280.00
[Wed Jun 19 00:03:05 2013] Got source and background scale factors 987876.000000, 10269873.000000
[Wed Jun 19 00:03:05 2013] User source parameters:
  Position = (322.6, 140.3) = 16 26 28.82 34 52 55.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90.1 +/- 11.9
  Background aperture counts = 26.9
  Rate = 0.008 +/- 0.001

[Wed Jun 19 00:03:05 2013] Updating counts from extracted products
[Wed Jun 19 00:03:05 2013] Set source signif. to 90.07/5.19 = 17.35
[Wed Jun 19 00:03:06 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:03:06 2013] Using photon index=1.80, rate=0.00803, arf fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5.arf
[Wed Jun 19 00:03:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:03:06 2013] Updating source flux to 1.6e-13
[Wed Jun 19 00:03:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:03:11 2013] xmm0674811001/analysis//spectral/fullrun_mos1_xmm0674811001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete