[Sun Jun 16 07:06:19 2013] Detection parameters:
  Position = (285.4, 223.5) = 17 45 40.18 -29 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 12.8
  Background counts = 33.2
  Rate = 0.006 +/- 0.001

[Sun Jun 16 07:06:20 2013] Off-axis axis estimate = 5.52'
[Sun Jun 16 10:01:48 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 10:01:48 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Sun Jun 16 10:01:48 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Sun Jun 16 10:01:48 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.19"
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14.csv
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14.csv
[Sun Jun 16 11:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 16 11:21:58 2013] Fit fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Jun 16 11:22:27 2013] Spatial fit model total counts = 378.819000, observed total counts = 343.000000
[Sun Jun 16 11:22:27 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 11:22:27 2013] Source 21 is offset by 2.395520 and -3.169512 pixels which is larger than
2 X fitted extent = 1.176005 x 1.176005, not incorporating fit results
[Sun Jun 16 11:22:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:22:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:22:27 2013] Assessing source extent using major
[Sun Jun 16 11:22:27 2013] Source does appear to be extended
[Sun Jun 16 11:22:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 13:54:48 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 13:54:48 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Sun Jun 16 13:54:48 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Sun Jun 16 13:54:48 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.19"
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13.csv
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13.csv
[Sun Jun 16 14:39:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 16 14:39:31 2013] Fit fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jun 16 14:39:48 2013] Spatial fit model total counts = 378.019000, observed total counts = 343.000000
[Sun Jun 16 14:39:48 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 14:39:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:39:48 2013] Assessing source extent using major
[Sun Jun 16 14:39:48 2013] Source does appear to be extended
[Sun Jun 16 14:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 16:12:33 2013] XMMSAS src. selection expression = ellipse(24778.376282, 19392.406418, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 16:12:33 2013] Writing source region out to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_src.reg
[Sun Jun 16 16:12:33 2013] Extracting stamp from image fullrun_mos2_xmm0674600701_pi300-10000_cl_sm2.00.img.gz, (248, 186) - (323, 261)
[Sun Jun 16 16:12:33 2013] XMMSAS bgd. selection expression = annulus(24778.376282, 19392.406418, 1087.500000, 2175.000000, X, Y) && !ellipse(25840.684000, 23275.578000, 1772.016051, 1772.016051, 0.000000, X, Y) && !ellipse(23861.860168, 18862.750641, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 16:12:33 2013] Writing fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21.gif
[Sun Jun 16 16:19:08 2013] Mean detx,y = (-35.67, 4845.02) 
[Sun Jun 16 16:19:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 16:19:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 16:19:25 2013] Setting source spectrum file to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun 16 16:19:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jun 16 16:51:45 2013] Not generating rmf since there are only 73 counts
[Sun Jun 16 16:51:45 2013] rmf not generated due to insufficient counts
[Sun Jun 16 16:53:04 2013] Updating aperture counts using extracted products
[Sun Jun 16 16:53:04 2013] Total counts from fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 257.00
[Sun Jun 16 16:53:04 2013] Total counts from fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1350.00
[Sun Jun 16 16:53:04 2013] Got source and background scale factors 1159004.000000, 8607059.000000
[Sun Jun 16 16:53:05 2013] User source parameters:
  Position = (285.4, 223.5) = 17 45 40.18 -29 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 75.2 +/- 17.1
  Background aperture counts = 181.8
  Rate = 0.005 +/- 0.001

[Sun Jun 16 16:53:05 2013] Updating counts from extracted products
[Sun Jun 16 16:53:05 2013] Set source signif. to 75.21/13.48 = 5.58
[Sun Jun 16 16:53:06 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 16:53:06 2013] Using photon index=1.80, rate=0.00482, arf fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21.arf
[Sun Jun 16 16:53:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 16:53:06 2013] Updating source flux to 1.1e-13
[Sun Jun 16 16:53:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 16:53:16 2013] xmm0674600701/analysis//spectral/fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete