[Sun Jun 16 07:06:19 2013] Detection parameters:
  Position = (281.9, 303.0) = 17 45 41.33 -28 58 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.8 +/- 14.8
  Background counts = 62.4
  Rate = 0.005 +/- 0.001

[Sun Jun 16 07:06:20 2013] Off-axis axis estimate = 1.25'
[Sun Jun 16 10:01:48 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 10:01:48 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Jun 16 10:01:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Sun Jun 16 10:01:48 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.05"
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19.csv
[Sun Jun 16 11:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 11:21:58 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 16 11:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 16 11:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:22:27 2013] Source 12 is offset by -1.901154 and -7.493919 pixels which is larger than
2 X fitted extent = 6.484184 x 1.533356, not incorporating fit results
[Sun Jun 16 11:22:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:22:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:22:27 2013] Assessing source extent using major
[Sun Jun 16 11:22:27 2013] Source does appear to be extended
[Sun Jun 16 11:22:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 13:54:48 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 13:54:48 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Jun 16 13:54:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Sun Jun 16 13:54:48 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.05"
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16.csv
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16.csv
[Sun Jun 16 14:39:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 16 14:39:31 2013] fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jun 16 14:39:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 16 14:39:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600701_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 14:39:48 2013] Spatial fit model total counts = 988.842000, observed total counts = 848.000000
[Sun Jun 16 14:39:48 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 14:39:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:39:48 2013] Assessing source extent using major
[Sun Jun 16 14:39:48 2013] Source does appear to be extended
[Sun Jun 16 14:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 16:12:33 2013] XMMSAS src. selection expression = ellipse(24473.804596, 26311.653046, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 16:12:33 2013] Writing source region out to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun 16 16:12:33 2013] Extracting stamp from image fullrun_mos2_xmm0674600701_pi300-10000_cl_sm2.00.img.gz, (244, 265) - (319, 340)
[Sun Jun 16 16:12:33 2013] XMMSAS bgd. selection expression = annulus(24473.804596, 26311.653046, 1087.500000, 2175.000000, X, Y) && !ellipse(24889.576200, 24212.175600, 1022.360029, 856.552025, 34.237600, X, Y) && !ellipse(23366.160000, 24835.054000, 1243.064036, 1243.064036, 0.000000, X, Y) && !ellipse(23765.296753, 24322.101532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25277.684000, 23929.546000, 1199.632035, 572.383216, 346.054400, X, Y) && !ellipse(23447.209340, 26572.088600, 533.580815, 261.749608, 57.567500, X, Y) && !ellipse(23438.089800, 26380.022000, 1196.952034, 458.368013, 99.427900, X, Y) && !ellipse(22021.702400, 28646.208200, 611.764818, 611.764818, 0.000000, X, Y) && !ellipse(25840.684000, 23275.578000, 1772.016051, 1772.016051, 0.000000, X, Y) && !ellipse(22767.619049, 25250.228088, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 16:12:33 2013] Writing fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12.gif
[Sun Jun 16 16:19:50 2013] Mean detx,y = (-270.81, -2010.69) 
[Sun Jun 16 16:19:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 16:19:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 16:19:59 2013] Setting source spectrum file to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun 16 16:19:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun 16 16:51:57 2013] Not generating rmf since there are only 71 counts
[Sun Jun 16 16:51:57 2013] rmf not generated due to insufficient counts
[Sun Jun 16 16:53:05 2013] Updating aperture counts using extracted products
[Sun Jun 16 16:53:05 2013] Total counts from fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 582.00
[Sun Jun 16 16:53:05 2013] Total counts from fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 2145.00
[Sun Jun 16 16:53:05 2013] Got source and background scale factors 1179964.000000, 6554444.000000
[Sun Jun 16 16:53:05 2013] User source parameters:
  Position = (281.9, 303.0) = 17 45 41.33 -28 58 40.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 195.8 +/- 25.1
  Background aperture counts = 386.2
  Rate = 0.01 +/- 0.002

[Sun Jun 16 16:53:05 2013] Updating counts from extracted products
[Sun Jun 16 16:53:05 2013] Set source signif. to 195.85/19.65 = 9.97
[Sun Jun 16 16:53:06 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 16:53:06 2013] Using photon index=1.80, rate=0.0125, arf fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12.arf
[Sun Jun 16 16:53:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 16:53:06 2013] Updating source flux to 2.4e-13
[Sun Jun 16 16:53:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 16:53:16 2013] xmm0674600701/analysis//spectral/fullrun_mos2_xmm0674600701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete