[Thu Jul 25 00:53:16 2013] Detection parameters:
  Position = (286.9, 279.1) = 17 45 39.61 -29 0 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3897.1 +/- 81.7
  Background counts = 272.7
  Rate = 0.2 +/- 0.005

[Thu Jul 25 00:53:16 2013] Off-axis axis estimate = 1.63'
[Thu Jul 25 00:55:36 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 00:55:36 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jul 25 00:55:36 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Jul 25 00:55:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Jul 25 01:25:14 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 25 01:25:14 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 25 01:25:14 2013] Fit fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jul 25 01:25:14 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 25 01:25:14 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 25 01:25:14 2013] Fit fullrun_pn_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 25 02:50:58 2013] Spatial fit model total counts = 6824.440000, observed total counts = 6825.000000
[Thu Jul 25 02:50:58 2013] Offset between fit and detection position for source 1 = 0.526092 pixels
[Thu Jul 25 02:50:58 2013] 6738.660000 total counts/ 4241.180000 bgd. counts: snr = 38.349408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.526092 pixels
  Position = (286.4, 279.2) = 17 45 39.78 -29 0 27.5
  Extent = 14.5 (13.5-29.0)" x 10.5 (9.7-11.2)", rotation angle = 19 (11-29) degrees
  Source counts = 2497.5 +/- 82.1
  Background counts = 4241.2
  Rate = 0.2 +/- 0.008
[Thu Jul 25 02:50:58 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 02:50:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 02:50:58 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 02:50:58 2013] Source does appear to be extended
[Thu Jul 25 02:50:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Thu Jul 25 02:51:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 25 02:51:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 25 02:51:16 2013] Initial guess for spatial extent in simple fitting = 12.50"
[Thu Jul 25 02:51:16 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.076
[Thu Jul 25 02:51:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.50"
[Thu Jul 25 03:21:10 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 25 03:21:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1.csv
[Thu Jul 25 03:21:10 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 25 03:21:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1.csv
[Thu Jul 25 03:21:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 03:21:11 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 25 03:21:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jul 25 03:21:11 2013] fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 25 03:21:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jul 25 03:21:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 04:46:45 2013] Warning, spatial fit 1 centroid is now closest to src. 22
[Thu Jul 25 04:46:45 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 04:46:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 04:46:45 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 04:46:45 2013] Source does appear to be extended
[Thu Jul 25 04:46:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Thu Jul 25 04:47:00 2013] Counts = 2497.480000, rescaling region sizes by 2.000000
[Thu Jul 25 04:47:00 2013] XMMSAS src. selection expression = ellipse(24865.234800, 24242.177000, 1738.944050, 1261.428036, 18.778500, X, Y)
[Thu Jul 25 04:47:00 2013] Writing source region out to fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 25 04:47:00 2013] Extracting stamp from image fullrun_pn_xmm0674600601_pi300-10000_cl_sm2.00.img.gz, (186, 179) - (386, 379)
[Thu Jul 25 04:47:01 2013] XMMSAS bgd. selection expression = annulus(24865.234800, 24242.177000, 5796.480167, 11592.960334, X, Y) && !ellipse(23739.134200, 24754.935000, 1191.696034, 1191.696034, 0.000000, X, Y) && !ellipse(36086.294739, 36328.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35386.872140, 35011.775600, 898.888026, 898.888026, 0.000000, X, Y) && !ellipse(13621.165253, 33977.296112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13878.579636, 33358.578705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16685.766006, 32262.617126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22069.723358, 31318.690491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20833.958557, 29068.962036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21816.943329, 28692.322235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19910.767700, 15905.873718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.804138, 26808.937378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23441.362000, 26589.104000, 470.800814, 317.847209, 162.599000, X, Y) && !ellipse(27548.060364, 26326.043304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24494.800568, 26144.189728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23408.898895, 26136.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.542053, 25434.550842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.834076, 25447.268433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17664.501404, 24935.511536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.106384, 22638.406738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25458.079712, 22756.053741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.284240, 22563.548000, 406.109612, 406.109612, 0.000000, X, Y) && !ellipse(21526.668976, 19930.552979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.876190, 19372.098099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23836.886963, 18843.325119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.969727, 17059.677765, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 25 04:47:01 2013] Writing fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1.gif
[Thu Jul 25 04:47:12 2013] Mean detx,y = (216.17, -67.20) 
[Thu Jul 25 04:47:15 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 25 04:49:53 2013] Binned source spectrum to 10 counts/bin
[Thu Jul 25 04:49:54 2013] Setting source spectrum file to fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 25 04:49:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 25 08:16:40 2013] Updating aperture counts using extracted products
[Thu Jul 25 08:16:40 2013] Total counts from fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 14342.00
[Thu Jul 25 08:16:40 2013] Total counts from fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 69482.00
[Thu Jul 25 08:16:40 2013] Got source and background scale factors 6263371.000000, 270425602.000000
[Thu Jul 25 08:16:40 2013] User source parameters:
  Position = (286.4, 279.2) = 17 45 39.78 -29 0 27.5
  Extent = 14.5 (13.5-29.0)" x 10.5 (9.7-11.2)", rotation angle = 19 (11-29) degrees
  Source aperture counts = 12732.7 +/- 120.8
  Background aperture counts = 1609.3
  Rate = 1 +/- 0.01

[Thu Jul 25 08:16:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 08:16:45 2013] Using photon index=1.80, rate=0.236, arf fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1.arf
[Thu Jul 25 08:16:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 25 08:16:45 2013] Updating source flux to 1.4e-12
[Thu Jul 25 08:17:10 2013] xmm0674600601/analysis//spectral/fullrun_pn_xmm0674600601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete