[Thu Jul 25 00:53:48 2013] Detection parameters:
  Position = (286.1, 293.0) = 17 45 39.89 -28 59 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.8 +/- 21.7
  Background counts = 100.8
  Rate = 0.01 +/- 0.001

[Thu Jul 25 00:53:49 2013] Off-axis axis estimate = 0.98'
[Thu Jul 25 02:15:01 2013] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 02:15:01 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Thu Jul 25 02:15:01 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.686
[Thu Jul 25 02:15:01 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 6.92"
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:51:08 2013] Source 19 is offset by -6.296545 and -7.312212 pixels which is larger than
2 X fitted extent = 1.363954 x 1.363954, not incorporating fit results
[Thu Jul 25 02:51:08 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 02:51:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 02:51:08 2013] Assessing source extent using major
[Thu Jul 25 02:51:08 2013] Source does appear to be extended
[Thu Jul 25 02:51:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 02:51:08 2013] Source is confused with source 20
[Thu Jul 25 04:06:36 2013] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 04:06:36 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Thu Jul 25 04:06:36 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.686
[Thu Jul 25 04:06:36 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.92"
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jul 25 04:46:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8.csv
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jul 25 04:46:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8.csv
[Thu Jul 25 04:46:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 04:46:39 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jul 25 04:46:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul 25 04:46:39 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jul 25 04:46:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul 25 04:46:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 04:46:53 2013] Source 19 is offset by -6.299051 and -7.320304 pixels which is larger than
2 X fitted extent = 1.477379 x 1.477379, not incorporating fit results
[Thu Jul 25 04:46:53 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 04:46:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 04:46:53 2013] Assessing source extent using major
[Thu Jul 25 04:46:53 2013] Source does appear to be extended
[Thu Jul 25 04:46:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 07:36:15 2013] XMMSAS src. selection expression = ellipse(24837.936554, 25438.639587, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 25 07:36:15 2013] Writing source region out to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_src.reg
[Thu Jul 25 07:36:15 2013] Extracting stamp from image fullrun_mos2_xmm0674600601_pi300-10000_cl_sm2.00.img.gz, (249, 255) - (324, 330)
[Thu Jul 25 07:36:15 2013] XMMSAS bgd. selection expression = annulus(24837.936554, 25438.639587, 1087.500000, 2175.000000, X, Y) && !ellipse(24794.034000, 24231.475600, 1141.344033, 707.070420, 358.777790, X, Y) && !ellipse(23748.518000, 25280.746000, 1193.512034, 577.264817, 61.322700, X, Y) && !ellipse(23761.946106, 24405.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.378600, 24253.955800, 1789.800052, 1071.888031, 18.858700, X, Y) && !ellipse(23486.462000, 25933.662000, 2387.024069, 1280.160037, 83.020570, X, Y) && !ellipse(23474.207600, 26616.004400, 548.932016, 284.179208, 359.526326, X, Y) && !ellipse(25060.374908, 23122.166351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.834167, 26844.939575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23123.944000, 26342.374000, 1193.512034, 1193.512034, 0.000000, X, Y) && !ellipse(26536.662000, 25473.304000, 1106.096032, 1106.096032, 0.000000, X, Y) && !ellipse(25183.918732, 25249.014740, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 25 07:36:15 2013] Writing fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19.gif
[Thu Jul 25 07:45:01 2013] Mean detx,y = (63.17, -1085.45) 
[Thu Jul 25 07:45:02 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 25 07:45:07 2013] Binned source spectrum to 10 counts/bin
[Thu Jul 25 07:45:07 2013] Setting source spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 25 07:45:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jul 25 08:00:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 25 08:00:52 2013] rmf not generated due to insufficient counts
[Thu Jul 25 08:16:50 2013] Updating aperture counts using extracted products
[Thu Jul 25 08:16:50 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 1326.00
[Thu Jul 25 08:16:50 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_bgd.pi.gz = 676.00
[Thu Jul 25 08:16:51 2013] Got source and background scale factors 1222784.000000, 1359436.000000
[Thu Jul 25 08:16:51 2013] User source parameters:
  Position = (286.1, 293.0) = 17 45 39.89 -28 59 26.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 718.0 +/- 37.4
  Background aperture counts = 608.0
  Rate = 0.03 +/- 0.002

[Thu Jul 25 08:16:51 2013] Updating counts from extracted products
[Thu Jul 25 08:16:51 2013] Set source signif. to 717.95/24.66 = 29.12
[Thu Jul 25 08:16:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 08:16:53 2013] Using photon index=1.80, rate=0.0339, arf fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19.arf
[Thu Jul 25 08:16:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 25 08:16:53 2013] Updating source flux to 6.4e-13
[Thu Jul 25 08:17:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 25 08:17:07 2013] xmm0674600601/analysis//spectral/fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete