[Thu Jul 25 00:53:48 2013] Detection parameters:
  Position = (281.9, 309.1) = 17 45 41.25 -28 58 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.4 +/- 18.5
  Background counts = 90.4
  Rate = 0.006 +/- 0.0009

[Thu Jul 25 00:53:49 2013] Off-axis axis estimate = 1.43'
[Thu Jul 25 02:15:01 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 02:15:01 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Jul 25 02:15:01 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Thu Jul 25 02:15:01 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.14"
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:51:08 2013] Source 13 is offset by -6.631722 and 5.686593 pixels which is larger than
2 X fitted extent = 0.820828 x 0.820828, not incorporating fit results
[Thu Jul 25 02:51:08 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 02:51:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 02:51:08 2013] Assessing source extent using major
[Thu Jul 25 02:51:08 2013] Source does appear to be extended
[Thu Jul 25 02:51:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 04:06:36 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 04:06:36 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Jul 25 04:06:36 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Thu Jul 25 04:06:36 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.14"
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jul 25 04:46:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15.csv
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jul 25 04:46:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15.csv
[Thu Jul 25 04:46:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 04:46:39 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jul 25 04:46:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jul 25 04:46:39 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jul 25 04:46:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu Jul 25 04:46:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 04:46:53 2013] Source 13 is offset by -6.631722 and -7.446603 pixels which is larger than
2 X fitted extent = 0.820828 x 0.820828, not incorporating fit results
[Thu Jul 25 04:46:53 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 04:46:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 04:46:53 2013] Assessing source extent using major
[Thu Jul 25 04:46:53 2013] Source does appear to be extended
[Thu Jul 25 04:46:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 04:46:53 2013] Source is confused with source 17
[Thu Jul 25 07:36:15 2013] XMMSAS src. selection expression = ellipse(24479.834167, 26844.939575, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 25 07:36:15 2013] Writing source region out to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_src.reg
[Thu Jul 25 07:36:15 2013] Extracting stamp from image fullrun_mos2_xmm0674600601_pi300-10000_cl_sm2.00.img.gz, (244, 272) - (319, 347)
[Thu Jul 25 07:36:15 2013] XMMSAS bgd. selection expression = annulus(24479.834167, 26844.939575, 1087.500000, 2175.000000, X, Y) && !ellipse(24794.034000, 24231.475600, 1141.344033, 707.070420, 358.777790, X, Y) && !ellipse(23748.518000, 25280.746000, 1193.512034, 577.264817, 61.322700, X, Y) && !ellipse(23761.946106, 24405.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.378600, 24253.955800, 1789.800052, 1071.888031, 18.858700, X, Y) && !ellipse(23486.462000, 25933.662000, 2387.024069, 1280.160037, 83.020570, X, Y) && !ellipse(24837.936554, 25438.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23474.207600, 26616.004400, 548.932016, 284.179208, 359.526326, X, Y) && !ellipse(23123.944000, 26342.374000, 1193.512034, 1193.512034, 0.000000, X, Y) && !ellipse(26536.662000, 25473.304000, 1106.096032, 1106.096032, 0.000000, X, Y) && !ellipse(25183.918732, 25249.014740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21670.731460, 28496.934400, 825.656024, 825.656024, 0.000000, X, Y)
[Thu Jul 25 07:36:15 2013] Writing fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13.gif
[Thu Jul 25 07:46:20 2013] Mean detx,y = (-240.51, -2516.38) 
[Thu Jul 25 07:46:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 25 07:46:26 2013] Binned source spectrum to 10 counts/bin
[Thu Jul 25 07:46:26 2013] Setting source spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jul 25 07:46:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jul 25 08:04:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 25 08:04:27 2013] rmf not generated due to insufficient counts
[Thu Jul 25 08:16:51 2013] Updating aperture counts using extracted products
[Thu Jul 25 08:16:51 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 730.00
[Thu Jul 25 08:16:51 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1659.00
[Thu Jul 25 08:16:51 2013] Got source and background scale factors 1141728.000000, 4379872.000000
[Thu Jul 25 08:16:51 2013] User source parameters:
  Position = (281.9, 309.1) = 17 45 41.25 -28 58 15.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 297.5 +/- 28.0
  Background aperture counts = 432.5
  Rate = 0.01 +/- 0.001

[Thu Jul 25 08:16:51 2013] Updating counts from extracted products
[Thu Jul 25 08:16:51 2013] Set source signif. to 297.54/20.80 = 14.31
[Thu Jul 25 08:16:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 08:16:53 2013] Using photon index=1.80, rate=0.0141, arf fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13.arf
[Thu Jul 25 08:16:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 25 08:16:53 2013] Updating source flux to 2.7e-13
[Thu Jul 25 08:17:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 25 08:17:07 2013] xmm0674600601/analysis//spectral/fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete