[Thu Jul 25 00:53:48 2013] Detection parameters:
  Position = (285.8, 279.1) = 17 45 39.97 -29 0 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1848.8 +/- 57.4
  Background counts = 102.0
  Rate = 0.09 +/- 0.003

[Thu Jul 25 00:53:49 2013] Off-axis axis estimate = 1.68'
[Thu Jul 25 02:15:01 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 02:15:01 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jul 25 02:15:01 2013] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.637
[Thu Jul 25 02:15:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul 25 02:50:53 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 25 02:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul 25 02:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:51:08 2013] Spatial fit model total counts = 10510.900000, observed total counts = 4753.000000
[Thu Jul 25 02:51:08 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 25 02:51:08 2013] Spatial fit model total counts = 4192.750000, observed total counts = 4253.000000
[Thu Jul 25 02:51:08 2013] Offset between fit and detection position for source 1 = 0.169274 pixels
[Thu Jul 25 02:51:08 2013] Warning, changing simple spatial fit ID from 1 to 5
[Thu Jul 25 02:51:08 2013] 3962.140000 total counts/ 2922.880000 bgd. counts: snr = 19.222892
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169274 pixels
  Position = (285.7, 278.9) = 17 45 40.00 -29 0 28.7
  Extent = 14.3 (14.2-28.5)" x 8.1 (6.8-9.6)", rotation angle = 356 (347-5) degrees
  Source counts = 1039.3 +/- 62.9
  Background counts = 2922.9
  Rate = 0.05 +/- 0.003
[Thu Jul 25 02:51:08 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 02:51:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 02:51:08 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 02:51:08 2013] Source does appear to be extended
[Thu Jul 25 02:51:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.48
[Thu Jul 25 02:51:08 2013] Source is confused with source 7
[Thu Jul 25 04:06:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 25 04:06:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 25 04:06:36 2013] Initial guess for spatial extent in simple fitting = 11.19"
[Thu Jul 25 04:06:36 2013] source mask rpix=2.6, npix_max = 37, mask sum = 30, frac = 0.795
[Thu Jul 25 04:06:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.19"
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 25 04:46:38 2013] Fit fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jul 25 04:46:38 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 25 04:46:39 2013] fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 25 04:46:39 2013] Fit fullrun_mos2_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 25 04:46:53 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Thu Jul 25 04:46:53 2013] Spatial fit model total counts = 4200.420000, observed total counts = 4253.000000
[Thu Jul 25 04:46:53 2013] Offset between fit and detection position for source 1 = 0.243688 pixels
[Thu Jul 25 04:46:53 2013] Warning, changing simple spatial fit ID from 1 to 5
[Thu Jul 25 04:46:53 2013] 4006.760000 total counts/ 2896.420000 bgd. counts: snr = 20.631235
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.243688 pixels
  Position = (285.5, 279.1) = 17 45 40.05 -29 0 28.0
  Extent = 14.3 (14.2-28.5)" x 8.8 (7.4-10.4)", rotation angle = 359 (349-10) degrees
  Source counts = 1110.3 +/- 63.3
  Background counts = 2896.4
  Rate = 0.05 +/- 0.003
[Thu Jul 25 04:46:53 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 04:46:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 04:46:53 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 04:46:53 2013] Source does appear to be extended
[Thu Jul 25 04:46:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.36
[Thu Jul 25 07:36:14 2013] Counts = 1110.340000, rescaling region sizes by 2.000000
[Thu Jul 25 07:36:14 2013] XMMSAS src. selection expression = ellipse(24794.034000, 24231.475600, 1712.016049, 1060.605631, 358.777790, X, Y)
[Thu Jul 25 07:36:14 2013] Writing source region out to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 25 07:36:14 2013] Extracting stamp from image fullrun_mos2_xmm0674600601_pi300-10000_cl_sm2.00.img.gz, (187, 181) - (384, 377)
[Thu Jul 25 07:36:14 2013] XMMSAS bgd. selection expression = annulus(24794.034000, 24231.475600, 5706.720164, 11413.440328, X, Y) && !ellipse(23748.518000, 25280.746000, 1193.512034, 577.264817, 61.322700, X, Y) && !ellipse(23761.946106, 24405.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.378600, 24253.955800, 1789.800052, 1071.888031, 18.858700, X, Y) && !ellipse(27497.612152, 16273.482437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23486.462000, 25933.662000, 2387.024069, 1280.160037, 83.020570, X, Y) && !ellipse(24837.936554, 25438.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23474.207600, 26616.004400, 548.932016, 284.179208, 359.526326, X, Y) && !ellipse(23856.119995, 18845.462418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17619.965942, 24980.933777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13882.842285, 33275.433807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24803.984039, 19405.673599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.374908, 23122.166351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.834167, 26844.939575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23123.944000, 26342.374000, 1193.512034, 1193.512034, 0.000000, X, Y) && !ellipse(26536.662000, 25473.304000, 1106.096032, 1106.096032, 0.000000, X, Y) && !ellipse(25183.918732, 25249.014740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.749146, 36320.712585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13648.186813, 33973.783508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21503.714000, 21675.549800, 1150.984033, 1150.984033, 0.000000, X, Y) && !ellipse(35383.949219, 35002.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21670.731460, 28496.934400, 825.656024, 825.656024, 0.000000, X, Y)
[Thu Jul 25 07:36:14 2013] Writing fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1.gif
[Thu Jul 25 07:36:20 2013] Mean detx,y = (-92.33, -12.88) 
[Thu Jul 25 07:36:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 25 07:39:06 2013] Binned source spectrum to 10 counts/bin
[Thu Jul 25 07:39:06 2013] Setting source spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 25 07:39:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 25 08:16:49 2013] Updating aperture counts using extracted products
[Thu Jul 25 08:16:49 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 10078.00
[Thu Jul 25 08:16:50 2013] Total counts from fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 62624.00
[Thu Jul 25 08:16:50 2013] Got source and background scale factors 5260656.000000, 279079475.000000
[Thu Jul 25 08:16:50 2013] User source parameters:
  Position = (285.5, 279.1) = 17 45 40.05 -29 0 28.0
  Extent = 14.3 (14.2-28.5)" x 8.8 (7.4-10.4)", rotation angle = 359 (349-10) degrees
  Source aperture counts = 8897.5 +/- 101.4
  Background aperture counts = 1180.5
  Rate = 0.4 +/- 0.005

[Thu Jul 25 08:16:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 08:16:53 2013] Using photon index=1.80, rate=0.0524, arf fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1.arf
[Thu Jul 25 08:16:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 25 08:16:53 2013] Updating source flux to 8.6e-13
[Thu Jul 25 08:17:02 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jul 25 08:17:02 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jul 25 08:17:07 2013] xmm0674600601/analysis//spectral/fullrun_mos2_xmm0674600601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete