[Thu Jul 25 00:53:32 2013] Detection parameters:
  Position = (157.0, 382.0) = 17 46 22.63 -28 52 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.7 +/- 16.6
  Background counts = 51.0
  Rate = 0.004 +/- 0.0008

[Thu Jul 25 00:53:33 2013] Off-axis axis estimate = 11.91'
[Thu Jul 25 01:25:15 2013] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 01:25:15 2013] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Jul 25 01:25:15 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Thu Jul 25 01:25:15 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 12.38"
[Thu Jul 25 02:15:00 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul 25 02:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22.csv
[Thu Jul 25 02:15:00 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul 25 02:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22.csv
[Thu Jul 25 02:15:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:15:01 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul 25 02:15:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jul 25 02:15:01 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul 25 02:15:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jul 25 02:15:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674600601_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 02:51:03 2013] Source 10 is offset by -0.047921 and 2.999913 pixels which is larger than
2 X fitted extent = 1.442055 x 1.442055, not incorporating fit results
[Thu Jul 25 02:51:03 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.961539 pixels away
[Thu Jul 25 02:51:03 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 02:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 02:51:03 2013] Assessing source extent using major
[Thu Jul 25 02:51:03 2013] Source does appear to be extended
[Thu Jul 25 02:51:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 03:21:11 2013] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 03:21:11 2013] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Jul 25 03:21:11 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Thu Jul 25 03:21:11 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 12.38"
[Thu Jul 25 04:06:35 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jul 25 04:06:35 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jul 25 04:06:35 2013] Fit fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_src20 appears to have run properly
[Thu Jul 25 04:06:36 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jul 25 04:06:36 2013] fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jul 25 04:06:36 2013] Fit fullrun_mos1_xmm0674600601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Jul 25 04:46:49 2013] Warning, spatial fit 20 centroid is now closest to src. 7
[Thu Jul 25 04:46:49 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 04:46:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 04:46:49 2013] Assessing source extent using major
[Thu Jul 25 04:46:49 2013] Source does appear to be extended
[Thu Jul 25 04:46:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 06:46:00 2013] XMMSAS src. selection expression = ellipse(13608.652100, 33185.258392, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 25 06:46:00 2013] Writing source region out to fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_src.reg
[Thu Jul 25 06:46:00 2013] Extracting stamp from image fullrun_mos1_xmm0674600601_pi300-10000_cl_sm2.00.img.gz, (119, 344) - (194, 419)
[Thu Jul 25 06:46:00 2013] XMMSAS bgd. selection expression = annulus(13608.652100, 33185.258392, 1087.500000, 2175.000000, X, Y) && !ellipse(13582.900970, 33881.383179, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 25 06:46:00 2013] Writing fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10.gif
[Thu Jul 25 06:57:44 2013] Mean detx,y = (-8919.00, 10798.09) 
[Thu Jul 25 06:57:45 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 25 06:57:50 2013] Binned source spectrum to 10 counts/bin
[Thu Jul 25 06:57:50 2013] Setting source spectrum file to fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jul 25 06:57:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jul 25 07:28:41 2013] Not generating rmf since there are only 94 counts
[Thu Jul 25 07:28:41 2013] rmf not generated due to insufficient counts
[Thu Jul 25 08:16:48 2013] Updating aperture counts using extracted products
[Thu Jul 25 08:16:48 2013] Total counts from fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 551.00
[Thu Jul 25 08:16:48 2013] Total counts from fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 2757.00
[Thu Jul 25 08:16:48 2013] Got source and background scale factors 1262096.000000, 9508204.000000
[Thu Jul 25 08:16:48 2013] User source parameters:
  Position = (157.0, 382.0) = 17 46 22.63 -28 52 58.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 185.0 +/- 24.5
  Background aperture counts = 366.0
  Rate = 0.009 +/- 0.001

[Thu Jul 25 08:16:48 2013] Updating counts from extracted products
[Thu Jul 25 08:16:48 2013] Set source signif. to 185.04/19.13 = 9.67
[Thu Jul 25 08:16:49 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 08:16:49 2013] Using photon index=1.80, rate=0.00874, arf fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10.arf
[Thu Jul 25 08:16:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 25 08:16:49 2013] Updating source flux to 3.2e-13
[Thu Jul 25 08:16:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 25 08:17:02 2013] xmm0674600601/analysis//spectral/fullrun_mos1_xmm0674600601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete