[Thu Aug 23 15:20:40 2012] Detection parameters:
  Position = (265.5, 284.5) = 15 58 29.93 27 11 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 520.3 +/- 40.0
  Background counts = 927.0
  Rate = 0.01 +/- 0.0007

[Thu Aug 23 15:20:41 2012] Off-axis axis estimate = 2.60'
[Thu Aug 23 15:26:40 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 15:26:40 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Thu Aug 23 15:26:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.013
[Thu Aug 23 15:26:40 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.73"
[Thu Aug 23 18:58:02 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17.ximg exists
[Thu Aug 23 18:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17.csv
[Thu Aug 23 18:58:02 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Aug 23 18:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17.csv
[Thu Aug 23 18:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 18:58:03 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Aug 23 18:58:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Aug 23 18:58:03 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Aug 23 18:58:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Aug 23 18:58:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:36:24 2012] Spatial fit model total counts = 23479.800000, observed total counts = 18951.000000
[Thu Aug 23 22:36:24 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 22:36:24 2012] Warning, spatial fit 17 centroid is now closest to src. 8
[Thu Aug 23 22:36:24 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:36:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:36:24 2012] Assessing source extent using major
[Thu Aug 23 22:36:24 2012] Source does appear to be extended
[Thu Aug 23 22:36:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:36:24 2012] Source is confused with source 17
[Thu Aug 23 22:36:48 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:36:48 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Thu Aug 23 22:36:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.013
[Thu Aug 23 22:36:48 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.73"
[Fri Aug 24 04:33:18 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Aug 24 04:33:18 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Aug 24 04:33:18 2012] Fit fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Aug 24 04:33:19 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Aug 24 04:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Aug 24 04:33:19 2012] fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Aug 24 04:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Aug 24 04:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 07:20:24 2012] Source 18 is offset by -5.266331 and 1.809178 pixels which is larger than
2 X fitted extent = 2.779352 x 2.779352, not incorporating fit results
[Fri Aug 24 07:20:24 2012] Source 18 is offset by -6.721497 and 1.491509 pixels which is larger than
2 X fitted extent = 0.897085 x 0.897085, not incorporating fit results
[Fri Aug 24 07:20:24 2012] Spatial fit model total counts = 18037.900000, observed total counts = 18029.000000
[Fri Aug 24 07:20:24 2012] Offset between fit and detection position for source 18 = 1.676732 pixels
[Fri Aug 24 07:20:24 2012] Warning, changing simple spatial fit ID from 17 to 41
[Fri Aug 24 07:20:24 2012] 18199.880000 total counts/ 16504.100000 bgd. counts: snr = 13.199989
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.676732 pixels
  Position = (264.1, 283.4) = 15 58 30.36 27 11 2.5
  Extent = 32.0 (32.0-64.0)", rotation angle = 0
  Source counts = 1695.8 +/- 134.9
  Background counts = 16504.1
  Rate = 0.03 +/- 0.003
[Fri Aug 24 07:20:24 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 07:20:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 07:20:24 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 07:20:24 2012] Source does appear to be extended
[Fri Aug 24 07:20:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 07:20:42 2012] Counts = 1695.780000, rescaling region sizes by 2.000000
[Fri Aug 24 07:20:42 2012] XMMSAS src. selection expression = ellipse(22930.848000, 24611.640000, 3839.520110, 3839.520110, 0.000000, X, Y)
[Fri Aug 24 07:20:42 2012] Writing source region out to fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18_src.reg
[Fri Aug 24 07:20:42 2012] Extracting stamp from image fullrun_pn_xmm0674560201_pi300-10000_cl_sm2.00.img.gz, (43, 63) - (485, 504)
[Fri Aug 24 07:20:42 2012] XMMSAS bgd. selection expression = annulus(22930.848000, 24611.640000, 12798.400368, 25596.800737, X, Y) && !ellipse(25677.048000, 28194.150000, 3489.888100, 3489.888100, 0.000000, X, Y) && !ellipse(25003.206818, 28949.124634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23081.128200, 19628.190200, 433.197612, 433.197612, 0.000000, X, Y) && !ellipse(26130.168000, 29820.874600, 3821.544110, 3821.544110, -0.000000, X, Y) && !ellipse(23136.994690, 31773.117340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28433.509979, 30520.920563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.840698, 26451.206696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.072601, 25770.143890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29812.386169, 30305.239258, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(23267.077850, 32189.433899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.364166, 23954.666718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.614075, 23412.286713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15065.275513, 34299.590118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17611.552796, 36534.637000, 448.004013, 448.004013, 0.000000, X, Y) && !ellipse(27628.096222, 31167.754730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22390.503998, 26757.023590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.171967, 25076.992737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22505.859711, 24309.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24388.445404, 23849.301880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.321106, 21618.482544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17573.857376, 39478.901794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26292.568695, 40119.478058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21414.782059, 41354.135712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23033.700775, 34068.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37847.513733, 32110.098969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27428.063660, 14584.538651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21722.890244, 27021.281311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.201263, 26330.904663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20860.665497, 26048.122803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27678.605499, 25628.551178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.981003, 25443.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.724000, 25168.898000, 1147.656033, 1147.656033, 0.000000, X, Y) && !ellipse(22190.080000, 24687.788000, 2639.232076, 2639.232076, 0.000000, X, Y) && !ellipse(21408.948000, 24328.199200, 1319.616038, 1319.616038, 0.000000, X, Y) && !ellipse(22226.450000, 23929.046000, 1279.840037, 1279.840037, 0.000000, X, Y) && !ellipse(22313.814000, 23293.600000, 1359.496039, 1359.496039, 0.000000, X, Y)
[Fri Aug 24 07:20:42 2012] Writing fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18.gif
[Fri Aug 24 08:09:06 2012] Mean detx,y = (-2811.13, 302.75) 
[Fri Aug 24 08:09:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 08:19:52 2012] grppha failed
[Fri Aug 24 08:19:52 2012] Setting source spectrum file to fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18_src.pi.gz
[Fri Aug 24 08:19:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Aug 24 10:01:43 2012] Updating aperture counts using extracted products
[Fri Aug 24 10:01:43 2012] Error reading totcts from fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18_src.pi.gz
[Fri Aug 24 10:01:45 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 10:01:55 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Fri Aug 24 10:01:55 2012] Flag p found in src. 18 procflags, skipping spectral fitting
[Fri Aug 24 10:01:55 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Fri Aug 24 10:01:55 2012] Source 18 has no response, skipping
[Fri Aug 24 10:01:56 2012] xmm0674560201/analysis//spectral/fullrun_pn_xmm0674560201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete