[Thu Aug 23 15:21:11 2012] Detection parameters:
  Position = (265.8, 225.9) = 15 58 29.82 27 6 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1464.2 +/- 47.7
  Background counts = 69.7
  Rate = 0.04 +/- 0.001

[Thu Aug 23 15:21:12 2012] Off-axis axis estimate = 5.77'
[Thu Aug 23 18:58:04 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 18:58:04 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Aug 23 18:58:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Thu Aug 23 18:58:04 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.31"
[Thu Aug 23 21:30:15 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug 23 21:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6.csv
[Thu Aug 23 21:30:15 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug 23 21:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6.csv
[Thu Aug 23 21:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 21:30:16 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug 23 21:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 21:30:16 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug 23 21:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 21:30:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674560201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:36:31 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.539545 pixels away
[Thu Aug 23 22:36:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:36:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:36:31 2012] Assessing source extent using major
[Thu Aug 23 22:36:31 2012] Source does appear to be extended
[Thu Aug 23 22:36:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:33:19 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:33:19 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Aug 24 04:33:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Fri Aug 24 04:33:19 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.31"
[Fri Aug 24 06:43:26 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Aug 24 06:43:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6.csv
[Fri Aug 24 06:43:26 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Aug 24 06:43:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6.csv
[Fri Aug 24 06:43:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:43:27 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Aug 24 06:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug 24 06:43:27 2012] fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Aug 24 06:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug 24 06:43:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674560201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 07:20:30 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.459763 pixels away
[Fri Aug 24 07:20:30 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 07:20:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 07:20:30 2012] Assessing source extent using major
[Fri Aug 24 07:20:30 2012] Source does appear to be extended
[Fri Aug 24 07:20:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 08:44:09 2012] Counts = 1464.170776, rescaling region sizes by 2.000000
[Fri Aug 24 08:44:09 2012] XMMSAS src. selection expression = ellipse(23074.341309, 19606.798706, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 24 08:44:09 2012] Writing source region out to fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 24 08:44:09 2012] Extracting stamp from image fullrun_mos1_xmm0674560201_pi300-10000_cl_sm2.00.img.gz, (191, 151) - (341, 301)
[Fri Aug 24 08:44:09 2012] XMMSAS bgd. selection expression = annulus(23074.341309, 19606.798706, 4350.000000, 8700.000000, X, Y) && !ellipse(25529.003400, 27934.669600, 7121.232205, 7121.232205, 0.000000, X, Y) && !ellipse(25684.798000, 27288.202000, 1081.408031, 1081.408031, 0.000000, X, Y) && !ellipse(27990.218000, 29438.568800, 1267.536036, 1267.536036, 0.000000, X, Y) && !ellipse(25868.856000, 29486.826000, 1307.352038, 1307.352038, 0.000000, X, Y) && !ellipse(27959.552734, 28648.819580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.445404, 26649.048859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26642.932000, 26616.786000, 6658.992192, 6658.992192, 0.000000, X, Y) && !ellipse(24248.015594, 29032.131470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.812000, 27042.108000, 1150.784033, 1150.784033, 0.000000, X, Y) && !ellipse(23708.748000, 28488.686000, 1264.216036, 1264.216036, 0.000000, X, Y) && !ellipse(23223.551300, 28166.026398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.201904, 26028.180878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24873.961600, 25651.252000, 1114.712032, 1114.712032, 0.000000, X, Y) && !ellipse(29029.760000, 27912.206000, 957.280028, 957.280028, 0.000000, X, Y) && !ellipse(21943.432000, 26056.476000, 1256.136036, 1256.136036, 0.000000, X, Y) && !ellipse(27585.532000, 27043.456000, 1114.712032, 390.852011, 154.948000, X, Y) && !ellipse(24361.062000, 25576.972000, 1156.448033, 1156.448033, 0.000000, X, Y)
[Fri Aug 24 08:44:09 2012] Writing fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4.gif
[Fri Aug 24 08:53:03 2012] Mean detx,y = (-4448.59, -7540.61) 
[Fri Aug 24 08:53:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 08:54:20 2012] grppha failed
[Fri Aug 24 08:54:20 2012] Setting source spectrum file to fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 24 08:54:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 24 09:17:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 09:17:06 2012] rmf not generated due to insufficient counts
[Fri Aug 24 10:01:46 2012] Updating aperture counts using extracted products
[Fri Aug 24 10:01:46 2012] Error reading totcts from fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 24 10:01:49 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 10:01:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 10:01:54 2012] xmm0674560201/analysis//spectral/fullrun_mos1_xmm0674560201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete