[Fri May  3 17:59:51 2013] Detection parameters:
  Position = (327.9, 286.7) = 2 57 19.26 -57 32 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.0 +/- 8.8
  Background counts = 10.2
  Rate = 0.002 +/- 0.0004

[Fri May  3 17:59:51 2013] Off-axis axis estimate = 2.30'
[Fri May  3 19:22:30 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May  3 19:22:30 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May  3 19:22:30 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.646
[Fri May  3 19:22:30 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.58"
[Fri May  3 19:55:48 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21.ximg exists
[Fri May  3 19:55:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21.csv
[Fri May  3 19:55:48 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May  3 19:55:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21.csv
[Fri May  3 19:55:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:55:48 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May  3 19:55:48 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May  3 19:55:48 2013] Fit fullrun_mos2_xmm0674491101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri May  3 19:56:00 2013] Warning, spatial fit 21 centroid is now closest to src. 24
[Fri May  3 19:56:00 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:56:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:56:00 2013] Assessing source extent using major
[Fri May  3 19:56:00 2013] Source does appear to be extended
[Fri May  3 19:56:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 21:08:05 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May  3 21:08:05 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May  3 21:08:05 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.646
[Fri May  3 21:08:05 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.58"
[Fri May  3 21:43:35 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20.ximg exists
[Fri May  3 21:43:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20.csv
[Fri May  3 21:43:35 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May  3 21:43:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20.csv
[Fri May  3 21:43:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:43:35 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May  3 21:43:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri May  3 21:43:35 2013] fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May  3 21:43:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri May  3 21:43:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674491101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:43:51 2013] Warning, spatial fit 20 centroid is now closest to src. 24
[Fri May  3 21:43:51 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 28.182384 pixels away
[Fri May  3 21:43:51 2013] Vigneting correction estimate = 1.000000
[Fri May  3 21:43:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 21:43:51 2013] Assessing source extent using major
[Fri May  3 21:43:51 2013] Source does appear to be extended
[Fri May  3 21:43:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:39:19 2013] XMMSAS src. selection expression = ellipse(28478.353424, 24891.238922, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 22:39:19 2013] Writing source region out to fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_src.reg
[Fri May  3 22:39:19 2013] Extracting stamp from image fullrun_mos2_xmm0674491101_pi300-10000_cl_sm2.00.img.gz, (290, 249) - (365, 324)
[Fri May  3 22:39:19 2013] XMMSAS bgd. selection expression = annulus(28478.353424, 24891.238922, 1087.500000, 2175.000000, X, Y) && !ellipse(27171.771027, 24666.899567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.305847, 24192.897186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.037180, 26502.184200, 695.880020, 267.032808, 12.541084, X, Y)
[Fri May  3 22:39:19 2013] Writing fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20.gif
[Fri May  3 22:42:36 2013] Mean detx,y = (-292.20, 705.60) 
[Fri May  3 22:42:37 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 22:42:42 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 22:42:42 2013] Setting source spectrum file to fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May  3 22:42:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May  3 22:45:09 2013] Not generating rmf since there are only 37 counts
[Fri May  3 22:45:09 2013] rmf not generated due to insufficient counts
[Fri May  3 22:46:21 2013] Updating aperture counts using extracted products
[Fri May  3 22:46:21 2013] Total counts from fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 187.00
[Fri May  3 22:46:21 2013] Total counts from fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 547.00
[Fri May  3 22:46:21 2013] Got source and background scale factors 1161532.000000, 8476188.000000
[Fri May  3 22:46:21 2013] User source parameters:
  Position = (327.9, 286.7) = 2 57 19.26 -57 32 34.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 112.0 +/- 14.7
  Background aperture counts = 75.0
  Rate = 0.004 +/- 0.0005

[Fri May  3 22:46:21 2013] Updating counts from extracted products
[Fri May  3 22:46:21 2013] Set source signif. to 112.04/8.66 = 12.94
[Fri May  3 22:46:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 22:46:23 2013] Using photon index=1.80, rate=0.00379, arf fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20.arf
[Fri May  3 22:46:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 22:46:23 2013] Updating source flux to 3.9e-14
[Fri May  3 22:46:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 22:46:27 2013] xmm0674491101/analysis//spectral/fullrun_mos2_xmm0674491101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete