[Fri Jun 21 17:01:05 2013] Detection parameters:
  Position = (340.2, 259.1) = 21 59 14.59 -62 47 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.1 +/- 19.6
  Background counts = 30.5
  Rate = 0.01 +/- 0.001

[Fri Jun 21 17:01:05 2013] Off-axis axis estimate = 4.16'
[Fri Jun 21 17:25:32 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 17:25:32 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Jun 21 17:25:32 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Fri Jun 21 17:25:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.51"
[Fri Jun 21 17:39:42 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 21 17:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 17:39:42 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 21 17:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 17:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:39:43 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 21 17:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 17:39:43 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 21 17:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 17:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674490801_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:39:48 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.540939 pixels away
[Fri Jun 21 17:39:48 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 17:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 17:39:48 2013] Assessing source extent using major
[Fri Jun 21 17:39:48 2013] Source does appear to be extended
[Fri Jun 21 17:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:02:17 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 18:02:17 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Jun 21 18:02:17 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Fri Jun 21 18:02:17 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.51"
[Fri Jun 21 18:13:37 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 21 18:13:37 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 21 18:13:37 2013] Fit fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jun 21 18:13:37 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 21 18:13:37 2013] fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 21 18:13:37 2013] Fit fullrun_mos2_xmm0674490801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 21 18:13:42 2013] Spatial fit model total counts = 433.816000, observed total counts = 415.000000
[Fri Jun 21 18:13:42 2013] Offset between fit and detection position for source 1 = 0.293752 pixels
[Fri Jun 21 18:13:42 2013] 431.608000 total counts/ 264.589000 bgd. counts: snr = 10.267861
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.293752 pixels
  Position = (340.2, 259.4) = 21 59 14.62 -62 47 6.9
  Extent = 7.4 (6.1-9.1)" x 5.5 (4.3-6.7)", rotation angle = 113 (80-137) degrees
  Source counts = 167.0 +/- 20.8
  Background counts = 264.6
  Rate = 0.009 +/- 0.001
[Fri Jun 21 18:13:42 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 18:13:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 18:13:42 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 18:13:42 2013] Source does appear to be extended
[Fri Jun 21 18:13:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Fri Jun 21 18:58:00 2013] XMMSAS src. selection expression = ellipse(29548.196100, 22520.434600, 445.721413, 331.307410, 112.764364, X, Y)
[Fri Jun 21 18:58:00 2013] Writing source region out to fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 18:58:00 2013] Extracting stamp from image fullrun_mos2_xmm0674490801_pi300-10000_cl_sm2.00.img.gz, (315, 234) - (366, 285)
[Fri Jun 21 18:58:00 2013] XMMSAS bgd. selection expression = annulus(29548.196100, 22520.434600, 742.869021, 1485.738043, X, Y)
[Fri Jun 21 18:58:00 2013] Writing fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 18:58:14 2013] Mean detx,y = (6115.64, -2232.76) 
[Fri Jun 21 18:58:16 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 18:58:28 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 18:58:29 2013] Setting source spectrum file to fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 18:58:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 19:09:33 2013] Updating aperture counts using extracted products
[Fri Jun 21 19:09:33 2013] Total counts from fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 227.00
[Fri Jun 21 19:09:33 2013] Total counts from fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 675.00
[Fri Jun 21 19:09:33 2013] Got source and background scale factors 449520.000000, 4790216.000000
[Fri Jun 21 19:09:33 2013] User source parameters:
  Position = (340.2, 259.4) = 21 59 14.62 -62 47 6.9
  Extent = 7.4 (6.1-9.1)" x 5.5 (4.3-6.7)", rotation angle = 113 (80-137) degrees
  Source aperture counts = 163.7 +/- 16.1
  Background aperture counts = 63.3
  Rate = 0.009 +/- 0.0009

[Fri Jun 21 19:09:35 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 19:09:35 2013] Using photon index=1.80, rate=0.00908, arf fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 19:09:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 19:09:35 2013] Updating source flux to 1.5e-13
[Fri Jun 21 19:09:40 2013] xmm0674490801/analysis//spectral/fullrun_mos2_xmm0674490801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete