[Mon May 6 04:07:42 2013] Detection parameters: Position = (321.9, 289.2) = 20 32 15.89 -56 29 1.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 49.0 +/- 10.9 Background counts = 18.3 Rate = 0.002 +/- 0.0004 [Mon May 6 04:07:43 2013] Off-axis axis estimate = 1.83' [Mon May 6 07:15:27 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting [Mon May 6 07:15:27 2013] Initial guess for spatial extent in simple fitting = 7.34" [Mon May 6 07:15:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836 [Mon May 6 07:15:27 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 7.34" [Mon May 6 08:57:45 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_src32.ximg exists [Mon May 6 08:57:45 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_src32_1.ximg exists [Mon May 6 08:57:45 2013] Fit fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_src32 appears to have run properly [Mon May 6 08:57:45 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Mon May 6 08:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32.csv [Mon May 6 08:57:45 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Mon May 6 08:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32.csv [Mon May 6 08:57:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0674490401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 08:58:11 2013] Source 35 is offset by -6.378046 and -2.099496 pixels which is larger than 2 X fitted extent = 0.839393 x 6.715127, not incorporating fit results [Mon May 6 08:58:11 2013] Warning, spatial fit 32 centroid is now closest to src. 33 [Mon May 6 08:58:11 2013] Vigneting correction estimate = 1.000000 [Mon May 6 08:58:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 08:58:11 2013] Assessing source extent using major [Mon May 6 08:58:11 2013] Source does appear to be extended [Mon May 6 08:58:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 11:40:44 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting [Mon May 6 11:40:44 2013] Initial guess for spatial extent in simple fitting = 7.34" [Mon May 6 11:40:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836 [Mon May 6 11:40:44 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.34" [Mon May 6 12:54:26 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_src28.ximg exists [Mon May 6 12:54:26 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_src28_1.ximg exists [Mon May 6 12:54:26 2013] Fit fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_src28 appears to have run properly [Mon May 6 12:54:27 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Mon May 6 12:54:27 2013] fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Mon May 6 12:54:27 2013] Fit fullrun_mos2_xmm0674490401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Mon May 6 12:54:47 2013] Source 35 is offset by -6.170414 and -2.434254 pixels which is larger than 2 X fitted extent = 0.839393 x 0.839393, not incorporating fit results [Mon May 6 12:54:47 2013] Spatial fit model total counts = 590.845000, observed total counts = 538.000000 [Mon May 6 12:54:47 2013] Offset between fit and detection position for source 35 = 6.271298 pixels [Mon May 6 12:54:47 2013] 609.018400 total counts/ 536.406000 bgd. counts: snr = 3.135191 Spatial fit parameters: Offset between fit and detection position for source 35 = 6.271298 pixels Position = (324.0, 283.2) = 20 32 14.78 -56 29 28.2 Extent = 14.7 (14.6-29.4)", rotation angle = 0 Source counts = 72.6 +/- 24.7 Background counts = 536.4 Rate = 0.003 +/- 0.0009 [Mon May 6 12:54:47 2013] Vigneting correction estimate = 1.000000 [Mon May 6 12:54:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 12:54:47 2013] Assessing source extent using major axis lower bound [Mon May 6 12:54:47 2013] Source does appear to be extended [Mon May 6 12:54:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 10:12:49 2013] XMMSAS src. selection expression = ellipse(28137.648000, 24594.168000, 881.058025, 881.058025, 0.000000, X, Y) [Tue May 7 10:12:49 2013] Writing source region out to fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_src.reg [Tue May 7 10:12:49 2013] Extracting stamp from image fullrun_mos2_xmm0674490401_pi300-10000_cl_sm2.00.img.gz, (273, 233) - (375, 334) [Tue May 7 10:12:49 2013] XMMSAS bgd. selection expression = annulus(28137.648000, 24594.168000, 1468.430042, 2936.860085, X, Y) && !ellipse(25836.595400, 25602.487400, 1060.152031, 499.241614, 111.280800, X, Y) && !ellipse(27252.802000, 27421.540000, 2088.760060, 1416.168041, 140.279500, X, Y) && !ellipse(26882.754000, 26597.370000, 1132.408033, 1132.408033, 0.000000, X, Y) && !ellipse(26622.364000, 26859.278000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(27377.251709, 25892.968201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.614000, 27840.310000, 1337.952038, 305.309609, 356.041000, X, Y) && !ellipse(27752.172000, 27787.652000, 2370.496068, 2370.496068, 0.000000, X, Y) && !ellipse(28009.002655, 25779.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.194336, 25452.743103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.168732, 26561.677155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.290000, 28448.405800, 1221.240035, 1221.240035, 0.000000, X, Y) && !ellipse(26600.692810, 27675.061035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28658.287415, 25881.617950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.971680, 27535.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25570.015747, 27247.394226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.975400, 24003.836000, 1137.328033, 1137.328033, 0.000000, X, Y) && !ellipse(24786.094452, 25369.879639, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 10:12:49 2013] Writing fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35.gif [Tue May 7 10:18:39 2013] Mean detx,y = (-1300.20, -2053.15) [Tue May 7 10:18:39 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 10:18:47 2013] Binned source spectrum to 10 counts/bin [Tue May 7 10:18:48 2013] Setting source spectrum file to fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Tue May 7 10:18:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_bgd.pi.gz [Tue May 7 11:01:57 2013] Not generating rmf since there are only 72 counts [Tue May 7 11:01:57 2013] rmf not generated due to insufficient counts [Tue May 7 11:10:17 2013] Updating aperture counts using extracted products [Tue May 7 11:10:17 2013] Total counts from fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 388.00 [Tue May 7 11:10:17 2013] Total counts from fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_bgd.pi.gz = 948.00 [Tue May 7 11:10:17 2013] Got source and background scale factors 2327376.000000, 10750316.000000 [Tue May 7 11:10:17 2013] User source parameters: Position = (324.0, 283.2) = 20 32 14.78 -56 29 28.2 Extent = 14.7 (14.6-29.4)", rotation angle = 0 Source aperture counts = 182.8 +/- 20.7 Background aperture counts = 205.2 Rate = 0.007 +/- 0.0007 [Tue May 7 11:10:17 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 11:10:17 2013] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35.arf [Tue May 7 11:10:17 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 11:10:17 2013] Updating source flux to 2.5e-14 [Tue May 7 11:10:24 2013] Flag b found in src. 35 procflags, skipping spectral fitting [Tue May 7 11:10:24 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting [Tue May 7 11:10:29 2013] xmm0674490401/analysis//spectral/fullrun_mos2_xmm0674490401_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete