[Sun May 26 14:47:51 2013] Detection parameters:
  Position = (297.1, 258.3) = 12 1 6.66 -39 55 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1008.0 +/- 40.4
  Background counts = 171.3
  Rate = 0.03 +/- 0.001

[Sun May 26 14:47:52 2013] Off-axis axis estimate = 2.91'
[Sun May 26 14:52:47 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Sun May 26 14:52:47 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Sun May 26 14:52:47 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.655
[Sun May 26 14:52:47 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 7.88"
[Sun May 26 17:47:05 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54.ximg exists
[Sun May 26 17:47:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54.csv
[Sun May 26 17:47:05 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May 26 17:47:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54.csv
[Sun May 26 17:47:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 17:47:06 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May 26 17:47:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May 26 17:47:06 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May 26 17:47:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May 26 17:47:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 23:50:50 2013] Warning, spatial fit 54 centroid is now closest to src. 57
[Sun May 26 23:50:50 2013] Vigneting correction estimate = 1.000000
[Sun May 26 23:50:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 23:50:50 2013] Assessing source extent using major
[Sun May 26 23:50:50 2013] Source does appear to be extended
[Sun May 26 23:50:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 23:50:50 2013] Source is confused with source 57
[Sun May 26 23:51:31 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Sun May 26 23:51:31 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Sun May 26 23:51:31 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.655
[Sun May 26 23:51:31 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 7.88"
[Mon May 27 03:03:05 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51.ximg exists
[Mon May 27 03:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51.csv
[Mon May 27 03:03:05 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51_1.ximg exists
[Mon May 27 03:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51.csv
[Mon May 27 03:03:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:03:06 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Mon May 27 03:03:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon May 27 03:03:06 2013] fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Mon May 27 03:03:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon May 27 03:03:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 09:47:41 2013] Source 59 is offset by -0.173378 and 7.639534 pixels which is larger than
2 X fitted extent = 1.025347 x 1.025347, not incorporating fit results
[Mon May 27 09:47:41 2013] Spatial fit model total counts = 2353.600000, observed total counts = 1867.000000
[Mon May 27 09:47:41 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 09:47:41 2013] Vigneting correction estimate = 1.000000
[Mon May 27 09:47:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 09:47:41 2013] Assessing source extent using major
[Mon May 27 09:47:41 2013] Source does appear to be extended
[Mon May 27 09:47:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 09:48:46 2013] Counts = 1007.984253, rescaling region sizes by 2.000000
[Mon May 27 09:48:46 2013] XMMSAS src. selection expression = ellipse(25801.882111, 22426.673462, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 09:48:46 2013] Writing source region out to fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_src.reg
[Mon May 27 09:48:46 2013] Extracting stamp from image fullrun_pn_xmm0674380701_pi300-10000_cl_sm2.00.img.gz, (222, 183) - (372, 333)
[Mon May 27 09:48:46 2013] XMMSAS bgd. selection expression = annulus(25801.882111, 22426.673462, 4350.000000, 8700.000000, X, Y) && !ellipse(32315.999146, 31476.298340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.002655, 29533.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35873.816000, 29600.676000, 1731.144050, 281.020808, 61.331100, X, Y) && !ellipse(22071.416400, 29334.690000, 387.241611, 387.241611, 0.000000, X, Y) && !ellipse(26450.604004, 28996.851440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25011.214386, 29106.225372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27933.525482, 28737.197540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.623993, 28490.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27620.439117, 27780.648895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26692.400177, 27890.498077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26051.282288, 27436.466827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.795105, 27453.331573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.139313, 27088.551788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.939941, 26834.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27174.115417, 26938.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.027710, 26469.279480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.613007, 26427.499939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.314000, 26000.282000, 1082.968031, 1082.968031, 0.000000, X, Y) && !ellipse(27602.700867, 26000.146423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24465.076000, 25435.620000, 2248.448065, 1843.096053, 352.238460, X, Y) && !ellipse(26281.978000, 26453.408000, 2138.400062, 1501.192043, 350.542670, X, Y) && !ellipse(20047.270721, 25340.546875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26820.019470, 25437.527130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.226000, 24271.388000, 1124.224032, 1124.224032, 0.000000, X, Y) && !ellipse(27095.417694, 24934.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18381.200100, 24794.576200, 411.779212, 411.779212, 0.000000, X, Y) && !ellipse(27797.264069, 24598.046692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.247406, 25278.005005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26809.261292, 23961.750336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.619385, 23707.940155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18400.899002, 23609.404053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.145477, 23689.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33643.935944, 22500.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.406128, 22355.162903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31174.195831, 22328.694916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20541.196442, 20665.660233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.299500, 19851.864400, 455.545613, 455.545613, 0.000000, X, Y) && !ellipse(28084.558800, 18378.421360, 686.189620, 686.189620, 0.000000, X, Y) && !ellipse(23744.968000, 13820.791600, 525.699215, 361.444010, 359.899692, X, Y) && !ellipse(17990.061096, 17842.045868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.783661, 17271.229172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28484.452026, 16482.096054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20977.074400, 16306.493000, 616.239218, 373.812811, 51.423340, X, Y)
[Mon May 27 09:48:46 2013] Writing fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59.gif
[Mon May 27 10:55:58 2013] Mean detx,y = (301.65, -1520.72) 
[Mon May 27 10:56:04 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 10:58:31 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 10:58:32 2013] Setting source spectrum file to fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon May 27 10:58:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Mon May 27 12:38:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 12:38:58 2013] rmf not generated due to insufficient counts
[Mon May 27 16:45:43 2013] Updating aperture counts using extracted products
[Mon May 27 16:45:43 2013] Total counts from fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 4526.00
[Mon May 27 16:45:43 2013] Total counts from fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_bgd.pi.gz = 43990.00
[Mon May 27 16:45:43 2013] Got source and background scale factors 4338249.000000, 123684055.000000
[Mon May 27 16:45:43 2013] User source parameters:
  Position = (297.1, 258.3) = 12 1 6.66 -39 55 48.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2983.0 +/- 68.3
  Background aperture counts = 1543.0
  Rate = 0.06 +/- 0.001

[Mon May 27 16:45:43 2013] Updating counts from extracted products
[Mon May 27 16:45:43 2013] Set source signif. to 2983.04/39.28 = 75.94
[Mon May 27 16:45:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 16:45:50 2013] Using photon index=1.80, rate=0.0643, arf fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59.arf
[Mon May 27 16:45:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 16:45:50 2013] Updating source flux to 2e-13
[Mon May 27 16:46:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 16:47:00 2013] xmm0674380701/analysis//spectral/fullrun_pn_xmm0674380701_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete