[Sun May 26 14:49:36 2013] Detection parameters:
  Position = (284.4, 269.8) = 12 1 11.47 -39 54 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.8 +/- 24.8
  Background counts = 46.6
  Rate = 0.007 +/- 0.0005

[Sun May 26 14:49:36 2013] Off-axis axis estimate = 2.31'
[Sun May 26 21:01:24 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun May 26 21:01:24 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Sun May 26 21:01:24 2013] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.845
[Sun May 26 21:01:24 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.58"
[Sun May 26 23:50:34 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6.ximg exists
[Sun May 26 23:50:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6.csv
[Sun May 26 23:50:34 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May 26 23:50:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6.csv
[Sun May 26 23:50:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 23:50:35 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May 26 23:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 26 23:50:35 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May 26 23:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 26 23:50:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674380701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 23:51:14 2013] Warning, spatial fit 6 centroid is now closest to src. 55
[Sun May 26 23:51:14 2013] Spatial fit model total counts = 1208.390000, observed total counts = 1184.000000
[Sun May 26 23:51:14 2013] Offset between fit and detection position for source 58 = 1.061399 pixels
[Sun May 26 23:51:14 2013] Warning, changing simple spatial fit ID from 6 to 30
[Sun May 26 23:51:14 2013] 1237.418000 total counts/ 1109.740000 bgd. counts: snr = 3.832706
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 1.061399 pixels
  Position = (283.8, 269.0) = 12 1 11.72 -39 55 1.0
  Extent = 15.7 (11.5-31.4)" x 4.2 (2.5-7.1)", rotation angle = 122 (111-132) degrees
  Source counts = 127.7 +/- 35.2
  Background counts = 1109.7
  Rate = 0.002 +/- 0.0006
[Sun May 26 23:51:14 2013] Vigneting correction estimate = 1.000000
[Sun May 26 23:51:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 23:51:14 2013] Assessing source extent using major axis lower bound
[Sun May 26 23:51:14 2013] Source does appear to be extended
[Sun May 26 23:51:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62
[Sun May 26 23:51:14 2013] Source is asymmetric
[Sun May 26 23:51:14 2013] Source is confused with source 55
[Mon May 27 06:47:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 06:47:48 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Mon May 27 06:47:48 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.064
[Mon May 27 06:47:48 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.94"
[Mon May 27 09:47:18 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 27 09:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6.csv
[Mon May 27 09:47:18 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 27 09:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6.csv
[Mon May 27 09:47:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 09:47:19 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 27 09:47:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 27 09:47:19 2013] fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 27 09:47:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 27 09:47:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674380701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 09:48:16 2013] Warning, spatial fit 6 centroid is now closest to src. 55
[Mon May 27 09:48:16 2013] Spatial fit model total counts = 1207.520000, observed total counts = 1184.000000
[Mon May 27 09:48:16 2013] Offset between fit and detection position for source 58 = 0.258055 pixels
[Mon May 27 09:48:16 2013] Warning, changing simple spatial fit ID from 6 to 30
[Mon May 27 09:48:16 2013] 1235.965000 total counts/ 1104.870000 bgd. counts: snr = 3.943942
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.258055 pixels
  Position = (283.9, 269.2) = 12 1 11.66 -39 55 0.1
  Extent = 15.7 (11.8-31.4)" x 4.4 (2.0-8.0)", rotation angle = 302 (290-314) degrees
  Source counts = 131.1 +/- 35.2
  Background counts = 1104.9
  Rate = 0.002 +/- 0.0006
[Mon May 27 09:48:16 2013] Vigneting correction estimate = 1.000000
[Mon May 27 09:48:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 09:48:16 2013] Assessing source extent using major axis lower bound
[Mon May 27 09:48:16 2013] Source does appear to be extended
[Mon May 27 09:48:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.48
[Mon May 27 14:58:20 2013] XMMSAS src. selection expression = ellipse(24652.502000, 23371.466000, 942.774027, 262.570208, 302.356200, X, Y)
[Mon May 27 14:58:20 2013] Writing source region out to fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_src.reg
[Mon May 27 14:58:20 2013] Extracting stamp from image fullrun_mos2_xmm0674380701_pi300-10000_cl_sm2.00.img.gz, (230, 215) - (338, 323)
[Mon May 27 14:58:20 2013] XMMSAS bgd. selection expression = annulus(24652.502000, 23371.466000, 1571.290045, 3142.580090, X, Y) && !ellipse(26319.741200, 26236.058000, 602.243217, 602.243217, 0.000000, X, Y) && !ellipse(27790.827050, 24513.859600, 407.899212, 407.899212, 0.000000, X, Y) && !ellipse(26433.626000, 27232.594000, 2412.624069, 1046.384030, 301.343000, X, Y) && !ellipse(25024.563873, 23879.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.209200, 22399.561600, 367.274411, 367.274411, 0.000000, X, Y) && !ellipse(26046.456000, 27869.372000, 2473.648071, 1888.368054, 359.308000, X, Y) && !ellipse(26018.218000, 27539.952000, 2454.584071, 1417.600041, 71.019100, X, Y) && !ellipse(26384.647766, 25631.970856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27035.156494, 25000.081848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27617.558000, 26792.376000, 816.720024, 816.720024, 0.000000, X, Y) && !ellipse(25896.111755, 25357.682434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.868896, 22850.848907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27741.002000, 25621.266000, 1117.008032, 1117.008032, 0.000000, X, Y) && !ellipse(25041.043200, 25033.458000, 1137.840033, 1137.840033, 0.000000, X, Y) && !ellipse(25120.121033, 24482.398926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24613.557373, 26569.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.766785, 26495.835083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.601746, 23262.343933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25789.029114, 23784.261627, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 14:58:20 2013] Writing fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58.gif
[Mon May 27 15:02:46 2013] Mean detx,y = (-884.94, 258.92) 
[Mon May 27 15:02:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 15:03:02 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 15:03:02 2013] Setting source spectrum file to fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon May 27 15:03:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon May 27 16:46:07 2013] Updating aperture counts using extracted products
[Mon May 27 16:46:07 2013] Total counts from fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 679.00
[Mon May 27 16:46:07 2013] Total counts from fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_bgd.pi.gz = 3930.00
[Mon May 27 16:46:07 2013] Got source and background scale factors 726968.000000, 16201168.000000
[Mon May 27 16:46:07 2013] User source parameters:
  Position = (283.9, 269.2) = 12 1 11.66 -39 55 0.1
  Extent = 15.7 (11.8-31.4)" x 4.4 (2.0-8.0)", rotation angle = 302 (290-314) degrees
  Source aperture counts = 502.7 +/- 27.1
  Background aperture counts = 176.3
  Rate = 0.009 +/- 0.0005

[Mon May 27 16:46:17 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 16:46:17 2013] Using photon index=1.80, rate=0.00228, arf fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58.arf
[Mon May 27 16:46:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 16:46:17 2013] Updating source flux to 3.1e-14
[Mon May 27 16:46:33 2013] Flag c found in src. 58 procflags, skipping spectral fitting
[Mon May 27 16:46:48 2013] xmm0674380701/analysis//spectral/fullrun_mos2_xmm0674380701_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete