[Sun Jun  2 09:41:14 2013] Detection parameters:
  Position = (335.6, 284.1) = 20 52 23.33 -61 13 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 423.7 +/- 32.3
  Background counts = 198.4
  Rate = 0.006 +/- 0.0004

[Sun Jun  2 09:41:19 2013] Off-axis axis estimate = 2.89'
[Sun Jun  2 09:50:00 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 09:50:00 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Sun Jun  2 09:50:00 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Sun Jun  2 09:50:00 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 7.87"
[Sun Jun  2 13:16:35 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jun  2 13:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34.csv
[Sun Jun  2 13:16:36 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jun  2 13:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34.csv
[Sun Jun  2 13:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:16:37 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jun  2 13:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun  2 13:16:37 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jun  2 13:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun Jun  2 13:16:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:18:46 2013] Spatial fit model total counts = 3009.940000, observed total counts = 2714.000000
[Sun Jun  2 17:18:46 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 17:18:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:18:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:18:46 2013] Assessing source extent using major
[Sun Jun  2 17:18:46 2013] Source does appear to be extended
[Sun Jun  2 17:18:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 17:19:46 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 17:19:46 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Sun Jun  2 17:19:46 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Sun Jun  2 17:19:46 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 7.87"
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34.csv
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34.csv
[Sun Jun  2 19:50:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun Jun  2 19:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:26 2013] Spatial fit model total counts = 3009.000000, observed total counts = 2714.000000
[Sun Jun  2 23:52:26 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 23:52:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:27 2013] Assessing source extent using major
[Sun Jun  2 23:52:27 2013] Source does appear to be extended
[Sun Jun  2 23:52:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 23:53:10 2013] XMMSAS src. selection expression = ellipse(29149.682892, 24666.785400, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 23:53:10 2013] Writing source region out to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_src.reg
[Sun Jun  2 23:53:10 2013] Extracting stamp from image fullrun_pn_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (298, 247) - (373, 322)
[Sun Jun  2 23:53:10 2013] XMMSAS bgd. selection expression = annulus(29149.682892, 24666.785400, 1087.500000, 2175.000000, X, Y) && !ellipse(32183.122894, 24568.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30181.690200, 25269.941600, 706.837620, 706.837620, 0.000000, X, Y) && !ellipse(29372.551480, 25509.420400, 417.237612, 417.237612, 0.000000, X, Y) && !ellipse(30069.178240, 23543.788800, 393.676811, 393.676811, 0.000000, X, Y) && !ellipse(29626.956268, 27022.441559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28184.906311, 24904.691956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.002655, 24613.963593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28490.157684, 23968.818024, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 23:53:10 2013] Writing fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38.gif
[Mon Jun  3 00:39:25 2013] Mean detx,y = (-4536.61, 1123.76) 
[Mon Jun  3 00:39:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 00:39:57 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 00:39:58 2013] Setting source spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jun  3 00:39:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Jun  3 02:40:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 02:40:03 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:49:59 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:49:59 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 1914.00
[Mon Jun  3 08:50:00 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 5689.00
[Mon Jun  3 08:50:00 2013] Got source and background scale factors 1315132.000000, 6182538.000000
[Mon Jun  3 08:50:00 2013] User source parameters:
  Position = (335.6, 284.1) = 20 52 23.33 -61 13 1.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 703.9 +/- 44.8
  Background aperture counts = 1210.1
  Rate = 0.007 +/- 0.0005

[Mon Jun  3 08:50:00 2013] Updating counts from extracted products
[Mon Jun  3 08:50:00 2013] Set source signif. to 703.85/34.79 = 20.23
[Mon Jun  3 08:50:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:50:27 2013] Using photon index=1.80, rate=0.00727, arf fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38.arf
[Mon Jun  3 08:50:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:50:27 2013] Updating source flux to 2.6e-14
[Mon Jun  3 08:52:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:52:30 2013] xmm0674370101/analysis//spectral/fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete