[Sun Jun  2 09:41:14 2013] Detection parameters:
  Position = (341.1, 311.2) = 20 52 20.05 -61 11 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 645.3 +/- 36.4
  Background counts = 189.8
  Rate = 0.009 +/- 0.0005

[Sun Jun  2 09:41:19 2013] Off-axis axis estimate = 3.23'
[Sun Jun  2 09:50:00 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 09:50:00 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Sun Jun  2 09:50:00 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Sun Jun  2 09:50:00 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.04"
[Sun Jun  2 13:16:35 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun  2 13:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31.csv
[Sun Jun  2 13:16:35 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun  2 13:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31.csv
[Sun Jun  2 13:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:16:37 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun  2 13:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  2 13:16:37 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun  2 13:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  2 13:16:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:18:46 2013] Spatial fit model total counts = 2272.430000, observed total counts = 1958.000000
[Sun Jun  2 17:18:46 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 17:18:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:18:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:18:46 2013] Assessing source extent using major
[Sun Jun  2 17:18:46 2013] Source does appear to be extended
[Sun Jun  2 17:18:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 17:19:46 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 17:19:46 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Sun Jun  2 17:19:46 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Sun Jun  2 17:19:46 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.04"
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31.csv
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31.csv
[Sun Jun  2 19:50:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sun Jun  2 19:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:26 2013] Spatial fit model total counts = 2272.260000, observed total counts = 1958.000000
[Sun Jun  2 23:52:26 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 23:52:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:27 2013] Assessing source extent using major
[Sun Jun  2 23:52:27 2013] Source does appear to be extended
[Sun Jun  2 23:52:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 23:53:10 2013] XMMSAS src. selection expression = ellipse(29626.956268, 27022.441559, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 23:53:10 2013] Writing source region out to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_src.reg
[Sun Jun  2 23:53:10 2013] Extracting stamp from image fullrun_pn_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (304, 274) - (379, 349)
[Sun Jun  2 23:53:10 2013] XMMSAS bgd. selection expression = annulus(29626.956268, 27022.441559, 1087.500000, 2175.000000, X, Y) && !ellipse(32183.122894, 24568.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30181.690200, 25269.941600, 706.837620, 706.837620, 0.000000, X, Y) && !ellipse(30542.051941, 29288.214355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29372.551480, 25509.420400, 417.237612, 417.237612, 0.000000, X, Y) && !ellipse(28184.906311, 24904.691956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.002655, 24613.963593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29149.682892, 24666.785400, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 23:53:10 2013] Writing fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34.gif
[Mon Jun  3 00:35:58 2013] Mean detx,y = (-4404.01, 3452.87) 
[Mon Jun  3 00:36:01 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 00:36:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 00:36:17 2013] Setting source spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Jun  3 00:36:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Jun  3 02:38:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 02:38:56 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:49:58 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:49:58 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1594.00
[Mon Jun  3 08:49:58 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 6255.00
[Mon Jun  3 08:49:58 2013] Got source and background scale factors 1213294.000000, 7642298.000000
[Mon Jun  3 08:49:58 2013] User source parameters:
  Position = (341.1, 311.2) = 20 52 20.05 -61 11 1.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 601.0 +/- 40.9
  Background aperture counts = 993.0
  Rate = 0.006 +/- 0.0004

[Mon Jun  3 08:49:58 2013] Updating counts from extracted products
[Mon Jun  3 08:49:58 2013] Set source signif. to 600.95/31.51 = 19.07
[Mon Jun  3 08:50:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:50:27 2013] Using photon index=1.80, rate=0.00621, arf fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34.arf
[Mon Jun  3 08:50:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:50:27 2013] Updating source flux to 2.3e-14
[Mon Jun  3 08:52:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:52:30 2013] xmm0674370101/analysis//spectral/fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete