[Sun Jun  2 09:41:12 2013] Detection parameters:
  Position = (261.4, 135.0) = 20 53 8.18 -61 23 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7102.0 +/- 101.3
  Background counts = 166.1
  Rate = 0.07 +/- 0.001

[Sun Jun  2 09:41:19 2013] Off-axis axis estimate = 12.15'
[Sun Jun  2 09:50:00 2013] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 09:50:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 09:50:00 2013] Initial guess for spatial extent in simple fitting = 12.50"
[Sun Jun  2 09:50:00 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Sun Jun  2 09:50:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.50"
[Sun Jun  2 13:16:35 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 13:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 13:16:35 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 13:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 13:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:16:36 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 13:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 13:16:36 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 13:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 13:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:18:45 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.236408 pixels away
[Sun Jun  2 17:18:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:18:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:18:46 2013] Assessing source extent using major
[Sun Jun  2 17:18:46 2013] Source does appear to be extended
[Sun Jun  2 17:18:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 17:19:46 2013] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 17:19:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 17:19:46 2013] Initial guess for spatial extent in simple fitting = 12.50"
[Sun Jun  2 17:19:46 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Sun Jun  2 17:19:46 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.50"
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 19:50:30 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 19:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 19:50:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 19:50:31 2013] fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 19:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:26 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.230172 pixels away
[Sun Jun  2 23:52:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:27 2013] Assessing source extent using major
[Sun Jun  2 23:52:27 2013] Source does appear to be extended
[Sun Jun  2 23:52:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 23:53:09 2013] Counts = 7102.007324, rescaling region sizes by 2.000000
[Sun Jun  2 23:53:09 2013] XMMSAS src. selection expression = ellipse(22689.306305, 11699.512131, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 23:53:09 2013] Writing source region out to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  2 23:53:09 2013] Extracting stamp from image fullrun_pn_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (186, 60) - (336, 210)
[Sun Jun  2 23:53:09 2013] XMMSAS bgd. selection expression = annulus(22689.306305, 11699.512131, 4350.000000, 8700.000000, X, Y) && !ellipse(31862.005380, 15542.822400, 1975.180857, 1111.946432, 318.740184, X, Y) && !ellipse(29218.331329, 19920.406784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20546.527740, 9350.044182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.875946, 10093.233345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.454468, 16989.242493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30733.987280, 11830.647400, 649.972819, 295.339208, 336.684721, X, Y) && !ellipse(17971.789185, 10961.567314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.221283, 8596.775200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21768.773132, 9324.305664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26270.014221, 19451.204697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.615509, 17262.905655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22684.498400, 15530.106000, 618.840018, 335.496810, 358.480154, X, Y) && !ellipse(24830.011292, 12241.720886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25299.845276, 20321.532593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25165.338837, 13607.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.482361, 17440.916077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14477.157318, 14797.534393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.067535, 12855.307449, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 23:53:09 2013] Writing fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1.gif
[Sun Jun  2 23:53:36 2013] Mean detx,y = (-1434.38, -13092.15) 
[Sun Jun  2 23:53:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 23:56:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 23:56:20 2013] Setting source spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  2 23:56:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  3 01:43:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 01:43:58 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:49:45 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:49:45 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 9055.00
[Mon Jun  3 08:49:45 2013] Total counts from fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 60338.00
[Mon Jun  3 08:49:45 2013] Got source and background scale factors 4160898.000000, 87618932.000000
[Mon Jun  3 08:49:45 2013] User source parameters:
  Position = (261.4, 135.0) = 20 53 8.18 -61 23 49.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 6189.6 +/- 96.2
  Background aperture counts = 2865.4
  Rate = 0.06 +/- 0.001

[Mon Jun  3 08:49:45 2013] Updating counts from extracted products
[Mon Jun  3 08:49:45 2013] Set source signif. to 6189.63/53.53 = 115.63
[Mon Jun  3 08:50:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:50:23 2013] Using photon index=1.80, rate=0.064, arf fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1.arf
[Mon Jun  3 08:50:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:50:23 2013] Updating source flux to 4e-13
[Mon Jun  3 08:52:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:52:30 2013] xmm0674370101/analysis//spectral/fullrun_pn_xmm0674370101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete