[Sun Jun  2 09:42:58 2013] Detection parameters:
  Position = (331.0, 187.5) = 20 52 26.03 -61 19 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 13.3
  Background counts = 42.5
  Rate = 0.001 +/- 0.0002

[Sun Jun  2 09:42:58 2013] Off-axis axis estimate = 8.38'
[Sun Jun  2 15:09:52 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 15:09:52 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Jun  2 15:09:52 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.867
[Sun Jun  2 15:09:52 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 10.62"
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src43.ximg exists
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Jun  2 17:18:22 2013] Fit fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src43 appears to have run properly
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Jun  2 17:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:19:16 2013] Spatial fit model total counts = 443.230000, observed total counts = 406.000000
[Sun Jun  2 17:19:16 2013] Offset between fit and detection position for source 71 = 0.680061 pixels
[Sun Jun  2 17:19:16 2013] 436.066300 total counts/ 354.656000 bgd. counts: snr = 4.322905
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 0.680061 pixels
  Position = (331.6, 187.8) = 20 52 25.66 -61 19 59.3
  Extent = 10.9 (6.8-15.5)" x 5.5 (2.7-8.7)", rotation angle = 356 (333-18) degrees
  Source counts = 81.4 +/- 20.9
  Background counts = 354.7
  Rate = 0.0008 +/- 0.0002
[Sun Jun  2 17:19:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:19:17 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 17:19:17 2013] Source does appear to be extended
[Sun Jun  2 17:19:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Sun Jun  2 21:33:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 21:33:51 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Sun Jun  2 21:33:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Sun Jun  2 21:33:51 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.18"
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42.csv
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42_1.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42.csv
[Sun Jun  2 23:52:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:10 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sun Jun  2 23:52:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Jun  2 23:52:10 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sun Jun  2 23:52:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Jun  2 23:52:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:48 2013] Warning, spatial fit 42 centroid is now closest to src. 26
[Sun Jun  2 23:52:49 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:49 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 23:52:49 2013] Source does appear to be extended
[Sun Jun  2 23:52:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Mon Jun  3 06:49:07 2013] XMMSAS src. selection expression = ellipse(28803.056600, 16290.198880, 653.832019, 328.027209, 356.138460, X, Y)
[Mon Jun  3 06:49:07 2013] Writing source region out to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_src.reg
[Mon Jun  3 06:49:07 2013] Extracting stamp from image fullrun_mos2_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (294, 150) - (369, 225)
[Mon Jun  3 06:49:07 2013] XMMSAS bgd. selection expression = annulus(28803.056600, 16290.198880, 1089.720031, 2179.440063, X, Y) && !ellipse(31848.708679, 15513.703323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.996857, 16875.008530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.977295, 17147.332230, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 06:49:07 2013] Writing fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71.gif
[Mon Jun  3 07:17:51 2013] Mean detx,y = (6484.04, 6924.78) 
[Mon Jun  3 07:17:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 07:18:13 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 07:18:13 2013] Setting source spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon Jun  3 07:18:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Mon Jun  3 08:38:38 2013] Not generating rmf since there are only 81 counts
[Mon Jun  3 08:38:38 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:51:09 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:51:09 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 204.00
[Mon Jun  3 08:51:09 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_bgd.pi.gz = 2029.00
[Mon Jun  3 08:51:09 2013] Got source and background scale factors 629220.000000, 8477494.000000
[Mon Jun  3 08:51:09 2013] User source parameters:
  Position = (331.6, 187.8) = 20 52 25.66 -61 19 59.3
  Extent = 10.9 (6.8-15.5)" x 5.5 (2.7-8.7)", rotation angle = 356 (333-18) degrees
  Source aperture counts = 53.4 +/- 15.3
  Background aperture counts = 150.6
  Rate = 0.0005 +/- 0.0001

[Mon Jun  3 08:51:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:51:25 2013] Using photon index=1.80, rate=0.000756, arf fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71.arf
[Mon Jun  3 08:51:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:51:25 2013] Updating source flux to 1.7e-14
[Mon Jun  3 08:51:47 2013] Source 71 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 08:52:02 2013] xmm0674370101/analysis//spectral/fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete