[Sun Jun  2 09:42:58 2013] Detection parameters:
  Position = (303.2, 197.7) = 20 52 42.82 -61 19 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.9 +/- 13.8
  Background counts = 51.7
  Rate = 0.0009 +/- 0.0001

[Sun Jun  2 09:42:58 2013] Off-axis axis estimate = 7.32'
[Sun Jun  2 15:09:52 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 15:09:52 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sun Jun  2 15:09:52 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.881
[Sun Jun  2 15:09:52 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 10.09"
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59.ximg exists
[Sun Jun  2 17:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Jun  2 17:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  2 17:18:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sun Jun  2 17:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:19:16 2013] Warning, spatial fit 59 centroid is now closest to src. 26
[Sun Jun  2 17:19:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:19:17 2013] Assessing source extent using major
[Sun Jun  2 17:19:17 2013] Source does appear to be extended
[Sun Jun  2 17:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 21:33:51 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 21:33:51 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sun Jun  2 21:33:51 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.881
[Sun Jun  2 21:33:51 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 10.09"
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  2 23:52:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:10 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Jun  2 23:52:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Jun  2 23:52:10 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Jun  2 23:52:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Jun  2 23:52:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:48 2013] Warning, spatial fit 58 centroid is now closest to src. 26
[Sun Jun  2 23:52:49 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:49 2013] Assessing source extent using major
[Sun Jun  2 23:52:49 2013] Source does appear to be extended
[Sun Jun  2 23:52:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 06:49:08 2013] XMMSAS src. selection expression = ellipse(26331.977295, 17147.332230, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 06:49:08 2013] Writing source region out to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_src.reg
[Mon Jun  3 06:49:08 2013] Extracting stamp from image fullrun_mos2_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (266, 160) - (341, 235)
[Mon Jun  3 06:49:08 2013] XMMSAS bgd. selection expression = annulus(26331.977295, 17147.332230, 1087.500000, 2175.000000, X, Y) && !ellipse(29209.275024, 19767.957657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26174.492000, 19431.368000, 449.942413, 449.942413, 0.000000, X, Y) && !ellipse(27275.996857, 16875.008530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28803.056600, 16290.198880, 871.776025, 437.369613, 356.138460, X, Y) && !ellipse(25448.471161, 18351.433151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.470245, 20090.138824, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 06:49:08 2013] Writing fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70.gif
[Mon Jun  3 07:27:12 2013] Mean detx,y = (3860.58, 6688.03) 
[Mon Jun  3 07:27:15 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 07:27:50 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 07:27:51 2013] Setting source spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon Jun  3 07:27:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Mon Jun  3 08:41:09 2013] Not generating rmf since there are only 94 counts
[Mon Jun  3 08:41:09 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:51:16 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:51:16 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 363.00
[Mon Jun  3 08:51:16 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_bgd.pi.gz = 1844.00
[Mon Jun  3 08:51:16 2013] Got source and background scale factors 1052398.000000, 7275904.000000
[Mon Jun  3 08:51:16 2013] User source parameters:
  Position = (303.2, 197.7) = 20 52 42.82 -61 19 10.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 96.3 +/- 20.1
  Background aperture counts = 266.7
  Rate = 0.0009 +/- 0.0002

[Mon Jun  3 08:51:16 2013] Updating counts from extracted products
[Mon Jun  3 08:51:16 2013] Set source signif. to 96.28/16.33 = 5.90
[Mon Jun  3 08:51:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:51:26 2013] Using photon index=1.80, rate=0.000894, arf fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70.arf
[Mon Jun  3 08:51:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:51:26 2013] Updating source flux to 1.7e-14
[Mon Jun  3 08:51:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:52:02 2013] xmm0674370101/analysis//spectral/fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete