[Sun Jun  2 09:42:55 2013] Detection parameters:
  Position = (366.6, 178.9) = 20 52 4.48 -61 20 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5048.7 +/- 81.5
  Background counts = 44.3
  Rate = 0.05 +/- 0.0007

[Sun Jun  2 09:42:58 2013] Off-axis axis estimate = 9.98'
[Sun Jun  2 15:09:52 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 15:09:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 15:09:52 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Sun Jun  2 15:09:52 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Sun Jun  2 15:09:52 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.42"
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 17:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 17:18:22 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 17:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 17:18:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 17:18:23 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 17:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 17:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:19:16 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.316178 pixels away
[Sun Jun  2 17:19:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:19:17 2013] Assessing source extent using major
[Sun Jun  2 17:19:17 2013] Source does appear to be extended
[Sun Jun  2 17:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 21:33:51 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 21:33:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 21:33:51 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Sun Jun  2 21:33:51 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Sun Jun  2 21:33:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.42"
[Sun Jun  2 23:52:08 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 23:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 23:52:08 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 23:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 23:52:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 23:52:09 2013] fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 23:52:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 23:52:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:48 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.316178 pixels away
[Sun Jun  2 23:52:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:48 2013] Assessing source extent using major
[Sun Jun  2 23:52:48 2013] Source does appear to be extended
[Sun Jun  2 23:52:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 06:49:06 2013] Counts = 5048.691406, rescaling region sizes by 2.000000
[Mon Jun  3 06:49:06 2013] XMMSAS src. selection expression = ellipse(31848.708679, 15513.703323, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  3 06:49:06 2013] Writing source region out to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun  3 06:49:06 2013] Extracting stamp from image fullrun_mos2_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (292, 104) - (442, 254)
[Mon Jun  3 06:49:06 2013] XMMSAS bgd. selection expression = annulus(31848.708679, 15513.703323, 4350.000000, 8700.000000, X, Y) && !ellipse(22704.642000, 11706.282200, 675.706419, 309.695209, 14.746385, X, Y) && !ellipse(29209.275024, 19767.957657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33011.784088, 24573.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29949.090973, 21732.096558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.215698, 23532.514404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22672.497314, 15523.967667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32143.636420, 24505.514200, 411.011212, 411.011212, 0.000000, X, Y) && !ellipse(32235.939140, 22541.656800, 462.945613, 462.945613, 0.000000, X, Y) && !ellipse(26174.492000, 19431.368000, 449.942413, 449.942413, 0.000000, X, Y) && !ellipse(33891.936920, 13379.707596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.996857, 16875.008530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29153.126465, 24743.765320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28570.702000, 24250.468000, 1258.112036, 1258.112036, 0.000000, X, Y) && !ellipse(31705.453918, 20706.720261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31636.258200, 21170.740000, 1505.632043, 1505.632043, 0.000000, X, Y) && !ellipse(23361.902222, 22341.757660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30727.760620, 11793.181564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25295.637600, 20302.534000, 330.376010, 330.376010, 0.000000, X, Y) && !ellipse(28803.056600, 16290.198880, 871.776025, 437.369613, 356.138460, X, Y) && !ellipse(24831.675995, 12227.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36881.845062, 17345.320419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25448.471161, 18351.433151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.902400, 8568.473000, 561.609616, 234.988807, 343.207957, X, Y) && !ellipse(26331.977295, 17147.332230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37922.029785, 18654.025513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37605.691010, 24846.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38556.863220, 17596.660095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.470245, 20090.138824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35736.452148, 17913.598907, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 06:49:06 2013] Writing fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1.gif
[Mon Jun  3 06:49:20 2013] Mean detx,y = (9622.14, 6887.94) 
[Mon Jun  3 06:49:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 06:51:12 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 06:51:12 2013] Setting source spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  3 06:51:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  3 07:35:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 07:35:08 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:50:56 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:50:56 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 5713.00
[Mon Jun  3 08:50:56 2013] Total counts from fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 20378.00
[Mon Jun  3 08:50:56 2013] Got source and background scale factors 4476468.000000, 89838613.000000
[Mon Jun  3 08:50:56 2013] User source parameters:
  Position = (366.6, 178.9) = 20 52 4.48 -61 20 38.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4697.6 +/- 76.6
  Background aperture counts = 1015.4
  Rate = 0.04 +/- 0.0007

[Mon Jun  3 08:50:56 2013] Updating counts from extracted products
[Mon Jun  3 08:50:56 2013] Set source signif. to 4697.61/31.87 = 147.42
[Mon Jun  3 08:51:22 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:51:22 2013] Using photon index=1.80, rate=0.0436, arf fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1.arf
[Mon Jun  3 08:51:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:51:22 2013] Updating source flux to 9.6e-13
[Mon Jun  3 08:51:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:52:02 2013] xmm0674370101/analysis//spectral/fullrun_mos2_xmm0674370101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete