[Sun Jun  2 09:42:04 2013] Detection parameters:
  Position = (303.5, 198.5) = 20 52 42.65 -61 19 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.2 +/- 14.8
  Background counts = 64.1
  Rate = 0.002 +/- 0.0002

[Sun Jun  2 09:42:04 2013] Off-axis axis estimate = 7.26'
[Sun Jun  2 13:16:37 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 13:16:37 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sun Jun  2 13:16:37 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.759
[Sun Jun  2 13:16:37 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.06"
[Sun Jun  2 15:09:50 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun  2 15:09:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  2 15:09:50 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun  2 15:09:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  2 15:09:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:09:51 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun  2 15:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun  2 15:09:51 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun  2 15:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun  2 15:09:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674370101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 17:19:02 2013] Spatial fit model total counts = 588.190000, observed total counts = 527.000000
[Sun Jun  2 17:19:02 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 17:19:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 17:19:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 17:19:02 2013] Assessing source extent using major
[Sun Jun  2 17:19:02 2013] Source does appear to be extended
[Sun Jun  2 17:19:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 19:50:32 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 19:50:32 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sun Jun  2 19:50:32 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.759
[Sun Jun  2 19:50:32 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 10.06"
[Sun Jun  2 21:33:50 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun  2 21:33:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28.csv
[Sun Jun  2 21:33:50 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun  2 21:33:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28.csv
[Sun Jun  2 21:33:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 21:33:51 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun  2 21:33:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun  2 21:33:51 2013] fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun  2 21:33:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun  2 21:33:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674370101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:52:36 2013] Spatial fit model total counts = 588.186000, observed total counts = 527.000000
[Sun Jun  2 23:52:36 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 23:52:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:52:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:52:36 2013] Assessing source extent using major
[Sun Jun  2 23:52:36 2013] Source does appear to be extended
[Sun Jun  2 23:52:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 05:04:29 2013] XMMSAS src. selection expression = ellipse(26357.558502, 17217.363937, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 05:04:29 2013] Writing source region out to fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_src.reg
[Mon Jun  3 05:04:29 2013] Extracting stamp from image fullrun_mos1_xmm0674370101_pi300-10000_cl_sm2.00.img.gz, (266, 161) - (341, 236)
[Mon Jun  3 05:04:29 2013] XMMSAS bgd. selection expression = annulus(26357.558502, 17217.363937, 1087.500000, 2175.000000, X, Y) && !ellipse(27258.216125, 16965.964523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.836304, 19498.332794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.187561, 18368.405426, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 05:04:29 2013] Writing fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59.gif
[Mon Jun  3 05:23:20 2013] Mean detx,y = (6956.65, -4051.46) 
[Mon Jun  3 05:23:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 05:23:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 05:23:42 2013] Setting source spectrum file to fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon Jun  3 05:23:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Mon Jun  3 06:30:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 06:30:51 2013] rmf not generated due to insufficient counts
[Mon Jun  3 08:50:43 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:50:43 2013] Total counts from fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 399.00
[Mon Jun  3 08:50:43 2013] Total counts from fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_bgd.pi.gz = 1923.00
[Mon Jun  3 08:50:43 2013] Got source and background scale factors 1123628.000000, 6938244.000000
[Mon Jun  3 08:50:43 2013] User source parameters:
  Position = (303.5, 198.5) = 20 52 42.65 -61 19 9.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.6 +/- 21.0
  Background aperture counts = 311.4
  Rate = 0.0008 +/- 0.0002

[Mon Jun  3 08:50:43 2013] Updating counts from extracted products
[Mon Jun  3 08:50:43 2013] Set source signif. to 87.58/17.65 = 4.96
[Mon Jun  3 08:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:50:53 2013] Using photon index=1.80, rate=0.000819, arf fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59.arf
[Mon Jun  3 08:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 08:50:53 2013] Updating source flux to 1.3e-14
[Mon Jun  3 08:51:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 08:51:47 2013] xmm0674370101/analysis//spectral/fullrun_mos1_xmm0674370101_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete