[Wed May 29 05:29:01 2013] Detection parameters:
  Position = (229.0, 304.0) = 15 48 47.94 35 10 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.7 +/- 11.6
  Background counts = 7.8
  Rate = 0.004 +/- 0.0006

[Wed May 29 05:29:02 2013] Off-axis axis estimate = 5.05'
[Wed May 29 06:14:26 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 06:14:26 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Wed May 29 06:14:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.376
[Wed May 29 06:14:26 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.95"
[Wed May 29 06:38:58 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 29 06:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 06:38:58 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 29 06:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 06:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 06:38:58 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 29 06:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 06:38:58 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 29 06:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 06:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674320401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 07:11:38 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.443723 pixels away
[Wed May 29 07:11:38 2013] Vigneting correction estimate = 1.000000
[Wed May 29 07:11:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 07:11:38 2013] Assessing source extent using major
[Wed May 29 07:11:38 2013] Source does appear to be extended
[Wed May 29 07:11:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 07:48:51 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 07:48:51 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Wed May 29 07:48:51 2013] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.376
[Wed May 29 07:48:51 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.95"
[Wed May 29 08:13:54 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 29 08:13:54 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 29 08:13:54 2013] Fit fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed May 29 08:13:55 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 29 08:13:55 2013] fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 29 08:13:55 2013] Fit fullrun_mos1_xmm0674320401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 29 08:49:17 2013] Spatial fit model total counts = 165.442000, observed total counts = 160.000000
[Wed May 29 08:49:17 2013] Offset between fit and detection position for source 8 = 0.132076 pixels
[Wed May 29 08:49:17 2013] 163.672900 total counts/ 102.150000 bgd. counts: snr = 6.087201
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.132076 pixels
  Position = (228.9, 304.1) = 15 48 47.97 35 10 33.4
  Extent = 6.5 (4.9-8.3)", rotation angle = 0
  Source counts = 61.5 +/- 12.8
  Background counts = 102.2
  Rate = 0.002 +/- 0.0005
[Wed May 29 08:49:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 08:49:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 08:49:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 08:49:17 2013] Source does appear to be extended
[Wed May 29 08:49:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 09:22:50 2013] XMMSAS src. selection expression = ellipse(19870.084440, 26406.390200, 390.139211, 390.139211, 0.000000, X, Y)
[Wed May 29 09:22:50 2013] Writing source region out to fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_src.reg
[Wed May 29 09:22:50 2013] Extracting stamp from image fullrun_mos1_xmm0674320401_pi300-10000_cl_sm2.00.img.gz, (207, 282) - (251, 327)
[Wed May 29 09:22:50 2013] XMMSAS bgd. selection expression = annulus(19870.084440, 26406.390200, 650.232019, 1300.464037, X, Y)
[Wed May 29 09:22:50 2013] Writing fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8.gif
[Wed May 29 09:24:21 2013] Mean detx,y = (-1567.98, -7439.69) 
[Wed May 29 09:24:22 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 09:24:38 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 09:24:38 2013] Setting source spectrum file to fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 29 09:24:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 29 09:34:25 2013] Not generating rmf since there are only 61 counts
[Wed May 29 09:34:25 2013] rmf not generated due to insufficient counts
[Wed May 29 09:52:27 2013] Updating aperture counts using extracted products
[Wed May 29 09:52:27 2013] Total counts from fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 89.00
[Wed May 29 09:52:27 2013] Total counts from fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 148.00
[Wed May 29 09:52:28 2013] Got source and background scale factors 468800.000000, 3317542.000000
[Wed May 29 09:52:28 2013] User source parameters:
  Position = (228.9, 304.1) = 15 48 47.97 35 10 33.4
  Extent = 6.5 (4.9-8.3)", rotation angle = 0
  Source aperture counts = 68.1 +/- 10.5
  Background aperture counts = 20.9
  Rate = 0.002 +/- 0.0004

[Wed May 29 09:52:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 09:52:29 2013] Using photon index=1.80, rate=0.00223, arf fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8.arf
[Wed May 29 09:52:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 09:52:29 2013] Updating source flux to 3.6e-14
[Wed May 29 09:52:35 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 09:52:37 2013] xmm0674320401/analysis//spectral/fullrun_mos1_xmm0674320401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete