[Sat May 18 01:05:17 2013] Detection parameters:
  Position = (271.3, 297.0) = 0 43 3.06 41 15 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5101.9 +/- 86.7
  Background counts = 102.9
  Rate = 0.3 +/- 0.006

[Sat May 18 01:05:22 2013] Off-axis axis estimate = 1.97'
[Sat May 18 01:11:09 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:11:09 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Sat May 18 01:11:09 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Sat May 18 01:11:09 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.41"
[Sat May 18 09:44:47 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39.ximg exists
[Sat May 18 09:44:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39.csv
[Sat May 18 09:44:47 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat May 18 09:44:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39.csv
[Sat May 18 09:44:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 09:44:49 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat May 18 09:44:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat May 18 09:44:49 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat May 18 09:44:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat May 18 09:44:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:54:31 2013] Source 40 is offset by -1.568504 and -3.375642 pixels which is larger than
2 X fitted extent = 6.592368 x 0.838055, not incorporating fit results
[Sat May 18 17:54:31 2013] Warning, spatial fit 39 centroid is now closest to src. 100
[Sat May 18 17:54:31 2013] Spatial fit model total counts = 1708.570000, observed total counts = 3735.000000
[Sat May 18 17:54:31 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 17:54:31 2013] Source 40 is offset by -3.106090 and -0.517872 pixels which is larger than
2 X fitted extent = 2.106230 x 6.549885, not incorporating fit results
[Sat May 18 17:54:31 2013] Vigneting correction estimate = 1.000000
[Sat May 18 17:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 17:54:31 2013] Assessing source extent using major
[Sat May 18 17:54:31 2013] Source does appear to be extended
[Sat May 18 17:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 17:55:39 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sat May 18 17:55:39 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Sat May 18 17:55:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Sat May 18 17:55:39 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 7.41"
[Sat May 18 23:19:27 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src39.ximg exists
[Sat May 18 23:19:27 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat May 18 23:19:27 2013] Fit fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src39 appears to have run properly
[Sat May 18 23:19:29 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat May 18 23:19:29 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat May 18 23:19:29 2013] Fit fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun May 19 07:31:28 2013] Spatial fit model total counts = 5906.150000, observed total counts = 5636.000000
[Sun May 19 07:31:28 2013] Offset between fit and detection position for source 40 = 0.068934 pixels
[Sun May 19 07:31:28 2013] 5972.510000 total counts/ 2390.150000 bgd. counts: snr = 73.275139
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.068934 pixels
  Position = (271.3, 297.1) = 0 43 3.09 41 15 25.5
  Extent = 6.5 (6.3-6.7)" x 5.4 (5.2-5.6)", rotation angle = 67 (58-74) degrees
  Source counts = 3582.4 +/- 77.3
  Background counts = 2390.2
  Rate = 0.2 +/- 0.004
[Sun May 19 07:31:28 2013] Vigneting correction estimate = 1.000000
[Sun May 19 07:31:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 07:31:28 2013] Assessing source extent using major axis lower bound
[Sun May 19 07:31:28 2013] Source does appear to be extended
[Sun May 19 07:31:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Sun May 19 07:32:22 2013] Counts = 3582.360000, rescaling region sizes by 2.000000
[Sun May 19 07:32:22 2013] XMMSAS src. selection expression = ellipse(23552.842800, 25795.464200, 779.162422, 653.314819, 66.567500, X, Y)
[Sun May 19 07:32:22 2013] Writing source region out to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src40_src.reg
[Sun May 19 07:32:22 2013] Extracting stamp from image fullrun_pn_xmm0674210601_pi300-10000_cl_sm2.00.img.gz, (227, 252) - (316, 342)
[Sun May 19 07:32:22 2013] XMMSAS bgd. selection expression = annulus(23552.842800, 25795.464200, 2597.208075, 5194.416149, X, Y) && !ellipse(29086.243622, 26501.121246, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22550.846527, 31758.788147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24322.943176, 30540.156250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.057037, 29982.828430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.320000, 29787.923400, 368.452811, 368.452811, 0.000000, X, Y) && !ellipse(17943.697647, 29521.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.982120, 28998.244200, 486.237614, 417.815212, 304.160643, X, Y) && !ellipse(27595.221649, 28345.692230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28662.968231, 27667.398621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.453705, 27414.233612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27153.252000, 27008.205400, 594.893617, 392.208811, 73.388300, X, Y) && !ellipse(27712.772000, 26747.308000, 1181.008034, 563.728016, 45.908200, X, Y) && !ellipse(26705.571777, 26579.882690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.156281, 26542.268890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24272.370178, 26593.330414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25928.388400, 26088.628600, 403.856012, 383.179211, 211.308000, X, Y) && !ellipse(28166.387482, 26317.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21858.372406, 25212.139038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.746000, 25007.426000, 337.256810, 337.256810, 0.000000, X, Y) && !ellipse(26869.669000, 25780.219200, 671.290419, 410.133612, 122.419500, X, Y) && !ellipse(28593.877440, 23448.246200, 368.640811, 368.640811, 0.000000, X, Y) && !ellipse(27665.378143, 21377.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24707.882599, 20583.378220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22069.955673, 30147.328735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19495.364471, 28715.675873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25250.297119, 28737.200195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.210907, 28497.987366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.345459, 28135.387360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29984.850000, 27759.676000, 1262.416036, 1262.416036, 0.000000, X, Y) && !ellipse(25317.065796, 27635.230286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29355.721130, 27113.819702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.476532, 26423.796173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18444.387054, 26025.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.806732, 25785.792633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.554871, 25002.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.168091, 24671.891022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24342.899400, 22527.406800, 745.859221, 745.859221, 0.000000, X, Y) && !ellipse(28589.044250, 19969.644302, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 07:32:22 2013] Writing fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src40.gif
[Sun May 19 08:55:25 2013] Mean detx,y = (-2929.84, 2910.82) 
[Sun May 19 08:55:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 08:56:15 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 08:56:16 2013] Setting source spectrum file to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun May 19 08:56:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src40_bgd.pi.gz