[Sat May 18 01:05:16 2013] Detection parameters:
  Position = (334.9, 305.2) = 0 42 38.55 41 16 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25492.9 +/- 182.0
  Background counts = 132.2
  Rate = 2 +/- 0.01

[Sat May 18 01:05:22 2013] Off-axis axis estimate = 2.69'
[Sat May 18 01:11:09 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:11:09 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Sat May 18 01:11:09 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.717
[Sat May 18 01:11:09 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.77"
[Sat May 18 09:44:46 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 18 09:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1.csv
[Sat May 18 09:44:46 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 18 09:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1.csv
[Sat May 18 09:44:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 09:44:48 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 18 09:44:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 18 09:44:49 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 18 09:44:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 18 09:44:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:54:30 2013] Spatial fit model total counts = 34397.500000, observed total counts = 27113.000000
[Sat May 18 17:54:30 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 17:54:31 2013] Vigneting correction estimate = 1.000000
[Sat May 18 17:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 17:54:31 2013] Assessing source extent using major
[Sat May 18 17:54:31 2013] Source does appear to be extended
[Sat May 18 17:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 17:55:39 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat May 18 17:55:39 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Sat May 18 17:55:39 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.717
[Sat May 18 17:55:39 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.77"
[Sat May 18 23:19:27 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 18 23:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1.csv
[Sat May 18 23:19:27 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 18 23:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1.csv
[Sat May 18 23:19:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 23:19:28 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 18 23:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 18 23:19:28 2013] fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 18 23:19:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 18 23:19:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 07:31:28 2013] Spatial fit model total counts = 34371.200000, observed total counts = 27113.000000
[Sun May 19 07:31:28 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 07:31:28 2013] Source 1 is offset by -7.114924 and -0.828974 pixels which is larger than
2 X fitted extent = 4.002970 x 4.002970, not incorporating fit results
[Sun May 19 07:31:28 2013] Spatial fit model total counts = 22721.300000, observed total counts = 19734.000000
[Sun May 19 07:31:28 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 07:31:28 2013] Vigneting correction estimate = 1.000000
[Sun May 19 07:31:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 07:31:28 2013] Assessing source extent using major
[Sun May 19 07:31:28 2013] Source does appear to be extended
[Sun May 19 07:31:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 07:32:19 2013] Counts = 25492.939453, rescaling region sizes by 3.000000
[Sun May 19 07:32:19 2013] XMMSAS src. selection expression = ellipse(29086.243622, 26501.121246, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun May 19 07:32:19 2013] Writing source region out to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src1_src.reg
[Sun May 19 07:32:19 2013] Extracting stamp from image fullrun_pn_xmm0674210601_pi300-10000_cl_sm2.00.img.gz, (222, 193) - (447, 418)
[Sun May 19 07:32:19 2013] XMMSAS bgd. selection expression = annulus(29086.243622, 26501.121246, 9787.500000, 19575.000000, X, Y) && !ellipse(27107.374400, 37685.583600, 1640.568047, 423.176812, 6.852170, X, Y) && !ellipse(23931.092712, 43625.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31860.547455, 38356.525330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.379400, 38421.481200, 893.080026, 403.200812, 359.180907, X, Y) && !ellipse(26916.521600, 37716.913200, 1292.944037, 347.621610, 2.386140, X, Y) && !ellipse(28111.762909, 37509.507263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14187.103333, 36331.197296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11516.823547, 33795.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.364258, 32936.782166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22550.846527, 31758.788147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.463200, 31637.342000, 546.244016, 409.023212, 312.032100, X, Y) && !ellipse(29812.591200, 31394.910000, 429.527212, 429.527212, 0.000000, X, Y) && !ellipse(31242.228302, 12820.842514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.127000, 30868.533400, 448.673613, 365.259211, 47.612800, X, Y) && !ellipse(24322.943176, 30540.156250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31904.304993, 30394.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.057037, 29982.828430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.320000, 29787.923400, 368.452811, 368.452811, 0.000000, X, Y) && !ellipse(34896.382200, 29315.532000, 1668.456048, 437.807213, 73.431000, X, Y) && !ellipse(17943.697647, 29521.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36016.452000, 29196.808000, 392.347211, 360.686410, 55.587500, X, Y) && !ellipse(35036.859894, 28903.354584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.982120, 28998.244200, 486.237614, 417.815212, 304.160643, X, Y) && !ellipse(27595.221649, 28345.692230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28662.968231, 27667.398621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.453705, 27414.233612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12122.816727, 27629.168854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27153.252000, 27008.205400, 594.893617, 392.208811, 73.388300, X, Y) && !ellipse(27712.772000, 26747.308000, 1181.008034, 563.728016, 45.908200, X, Y) && !ellipse(32935.372345, 26493.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30132.064440, 26903.767800, 348.258410, 348.258410, 0.000000, X, Y) && !ellipse(26705.571777, 26579.882690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.156281, 26542.268890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24272.370178, 26593.330414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.586202, 26930.740600, 401.885612, 401.885612, 0.000000, X, Y) && !ellipse(25928.388400, 26088.628600, 403.856012, 383.179211, 211.308000, X, Y) && !ellipse(28166.387482, 26317.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32594.677080, 25998.704000, 423.836812, 391.384011, 73.534500, X, Y) && !ellipse(23552.842800, 25795.464200, 519.441615, 435.543213, 66.567500, X, Y) && !ellipse(21858.372406, 25212.139038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15827.754800, 24974.254400, 645.776819, 400.093612, 81.098132, X, Y) && !ellipse(32567.064026, 24066.775330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.746000, 25007.426000, 337.256810, 337.256810, 0.000000, X, Y) && !ellipse(26869.669000, 25780.219200, 671.290419, 410.133612, 122.419500, X, Y) && !ellipse(33571.105835, 24167.897430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36480.909088, 23507.862457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.877440, 23448.246200, 368.640811, 368.640811, 0.000000, X, Y) && !ellipse(32719.268890, 23600.629181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16471.690994, 23323.539703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30533.484161, 23182.767395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.744354, 22346.321655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33648.741547, 22231.635010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31394.601600, 22157.750000, 417.632812, 417.632812, 0.000000, X, Y) && !ellipse(27665.378143, 21377.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24707.882599, 20583.378220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16909.955353, 20127.668991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31416.858800, 19308.697800, 480.488014, 384.851211, 334.833711, X, Y) && !ellipse(17638.924179, 16673.333832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.947830, 16124.506088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26033.225600, 44664.844400, 1030.040030, 368.155211, -0.000000, X, Y) && !ellipse(31255.415833, 42123.610992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35734.503357, 32178.702271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.962799, 31915.041931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22069.955673, 30147.328735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19495.364471, 28715.675873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25250.297119, 28737.200195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.210907, 28497.987366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35645.105865, 28641.581970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.345459, 28135.387360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29984.850000, 27759.676000, 1262.416036, 1262.416036, 0.000000, X, Y) && !ellipse(25317.065796, 27635.230286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29355.721130, 27113.819702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.476532, 26423.796173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18444.387054, 26025.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.806732, 25785.792633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35447.072540, 25518.277191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.554871, 25002.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39675.623535, 24900.566040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.168091, 24671.891022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31919.305908, 24268.063721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39977.476471, 23642.546783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32092.602325, 23685.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24342.899400, 22527.406800, 745.859221, 745.859221, 0.000000, X, Y) && !ellipse(35137.756317, 20280.577438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28589.044250, 19969.644302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23532.124115, 19607.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22202.829269, 16326.063965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35355.521820, 15449.216644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.400269, 11449.215881, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 07:32:19 2013] Writing fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src1.gif
[Sun May 19 07:32:48 2013] Mean detx,y = (912.41, -627.03) 
[Sun May 19 07:32:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 07:44:10 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 07:44:11 2013] Setting source spectrum file to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 19 07:44:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210601_pi300-10000_pass1_cl_src1_bgd.pi.gz