[Sat May 18 01:07:29 2013] Detection parameters:
  Position = (307.3, 305.9) = 0 42 49.17 41 16 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 608.1 +/- 34.9
  Background counts = 48.1
  Rate = 0.03 +/- 0.002

[Sat May 18 01:07:32 2013] Off-axis axis estimate = 0.84'
[Sat May 18 13:29:18 2013] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sat May 18 13:29:18 2013] Initial guess for spatial extent in simple fitting = 6.85"
[Sat May 18 13:29:18 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sat May 18 13:29:18 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 6.85"
[Sat May 18 17:53:51 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33.ximg exists
[Sat May 18 17:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33.csv
[Sat May 18 17:53:51 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat May 18 17:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33.csv
[Sat May 18 17:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:53:52 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat May 18 17:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat May 18 17:53:52 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat May 18 17:53:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat May 18 17:53:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674210601_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:55:15 2013] Spatial fit model total counts = 10192.400000, observed total counts = 8398.000000
[Sat May 18 17:55:15 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 17:55:15 2013] Spatial fit model total counts = 3742.430000, observed total counts = 6546.000000
[Sat May 18 17:55:15 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 17:55:16 2013] Vigneting correction estimate = 1.000000
[Sat May 18 17:55:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 17:55:16 2013] Assessing source extent using major
[Sat May 18 17:55:16 2013] Source does appear to be extended
[Sat May 18 17:55:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 17:55:16 2013] Source is confused with source 3
[Sun May 19 03:37:46 2013] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sun May 19 03:37:46 2013] Initial guess for spatial extent in simple fitting = 6.85"
[Sun May 19 03:37:46 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sun May 19 03:37:46 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 6.85"
[Sun May 19 07:31:04 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_src32.ximg exists
[Sun May 19 07:31:04 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun May 19 07:31:04 2013] Fit fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_src32 appears to have run properly
[Sun May 19 07:31:05 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun May 19 07:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun May 19 07:31:05 2013] fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun May 19 07:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun May 19 07:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674210601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 07:31:57 2013] Source 35 is offset by -5.276187 and -5.017216 pixels which is larger than
2 X fitted extent = 1.927559 x 3.437596, not incorporating fit results
[Sun May 19 07:31:57 2013] Source 35 is offset by -5.132210 and -5.172648 pixels which is larger than
2 X fitted extent = 1.688290 x 3.101145, not incorporating fit results
[Sun May 19 07:31:57 2013] Vigneting correction estimate = 1.000000
[Sun May 19 07:31:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 07:31:57 2013] Assessing source extent using major
[Sun May 19 07:31:57 2013] Source does appear to be extended
[Sun May 19 07:31:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 11:51:56 2013] XMMSAS src. selection expression = ellipse(26689.755768, 26566.745605, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 11:51:56 2013] Writing source region out to fullrun_mos2_xmm0674210601_pi300-10000_pass1_cl_src35_src.reg
[Sun May 19 11:51:56 2013] Extracting stamp from image fullrun_mos2_xmm0674210601_pi300-10000_cl_sm2.00.img.gz, (270, 268) - (345, 343)
[Sun May 19 11:51:56 2013] XMMSAS bgd. selection expression = annulus(26689.755768, 26566.745605, 1087.500000, 2175.000000, X, Y) && !ellipse(29063.280400, 26576.395800, 417.424812, 395.834411, 30.224800, X, Y) && !ellipse(27140.487200, 27013.019000, 611.132818, 381.004811, 73.179900, X, Y) && !ellipse(26870.774800, 25793.075000, 654.181619, 375.250411, 299.012300, X, Y) && !ellipse(27770.108429, 26753.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.923553, 26121.406921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.954400, 26620.480200, 353.804810, 353.804810, 0.000000, X, Y) && !ellipse(25443.334000, 26574.218000, 404.258412, 259.194407, 345.487900, X, Y) && !ellipse(28370.123810, 25863.683228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28237.056000, 25016.773200, 344.998410, 344.998410, 0.000000, X, Y) && !ellipse(27566.176000, 28128.002600, 295.216808, 295.216808, 0.000000, X, Y) && !ellipse(25953.430680, 27502.738600, 309.933609, 309.933609, 0.000000, X, Y) && !ellipse(24653.442000, 29202.078000, 1262.216036, 1262.216036, 0.000000, X, Y) && !ellipse(28865.536346, 24742.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.196000, 25406.486000, 1116.032032, 1116.032032, 0.000000, X, Y) && !ellipse(27478.203888, 24625.754578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.069244, 28750.023987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.393738, 28375.635651, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 11:51:56 2013] Writing fullrun_mos2_xmm0674210601_pi300-10000_pass1_cl_src35.gif
[Sun May 19 12:17:27 2013] Mean detx,y = (821.99, -441.93) 
[Sun May 19 12:17:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 12:17:38 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 12:17:38 2013] Setting source spectrum file to fullrun_mos2_xmm0674210601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun May 19 12:17:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674210601_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun May 19 14:07:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 14:07:15 2013] rmf not generated due to insufficient counts