[Thu Jun 6 01:03:20 2013] Detection parameters: Position = (292.3, 328.7) = 0 42 54.48 41 17 31.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 132.5 +/- 19.4 Background counts = 90.5 Rate = 0.01 +/- 0.002 [Thu Jun 6 01:03:22 2013] Off-axis axis estimate = 2.24' [Thu Jun 6 01:09:05 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 01:09:05 2013] Initial guess for spatial extent in simple fitting = 7.55" [Thu Jun 6 01:09:05 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.251 [Thu Jun 6 01:09:05 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 7.55" [Thu Jun 6 08:00:32 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83.ximg exists [Thu Jun 6 08:00:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83.csv [Thu Jun 6 08:00:32 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83_1.ximg exists [Thu Jun 6 08:00:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83.csv [Thu Jun 6 08:00:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 08:00:34 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83.ximg exists [Thu Jun 6 08:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83.csv [Thu Jun 6 08:00:34 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists [Thu Jun 6 08:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83.csv [Thu Jun 6 08:00:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 15:51:58 2013] Warning, spatial fit 83 centroid is now closest to src. 30 [Thu Jun 6 15:51:58 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 15:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 15:51:58 2013] Assessing source extent using major [Thu Jun 6 15:51:58 2013] Source does appear to be extended [Thu Jun 6 15:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 15:51:58 2013] Source is confused with source 92 [Thu Jun 6 15:52:53 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 15:52:53 2013] Initial guess for spatial extent in simple fitting = 7.55" [Thu Jun 6 15:52:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.251 [Thu Jun 6 15:52:53 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 7.55" [Thu Jun 6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72.ximg exists [Thu Jun 6 20:38:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72.csv [Thu Jun 6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72_1.ximg exists [Thu Jun 6 20:38:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72.csv [Thu Jun 6 20:38:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 20:38:59 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72.ximg exists [Thu Jun 6 20:38:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72.csv [Thu Jun 6 20:38:59 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists [Thu Jun 6 20:38:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72.csv [Thu Jun 6 20:38:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 03:17:09 2013] Warning, spatial fit 72 centroid is now closest to src. 30 [Fri Jun 7 03:17:09 2013] Source 88 is offset by 7.070450 and -2.358088 pixels which is larger than 2 X fitted extent = 6.797012 x 6.797012, not incorporating fit results [Fri Jun 7 03:17:09 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 03:17:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 03:17:09 2013] Assessing source extent using major [Fri Jun 7 03:17:09 2013] Source does appear to be extended [Fri Jun 7 03:17:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 03:18:35 2013] XMMSAS src. selection expression = ellipse(25379.273132, 28548.868347, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 7 03:18:35 2013] Writing source region out to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_src.reg [Fri Jun 7 03:18:35 2013] Extracting stamp from image fullrun_pn_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (255, 291) - (330, 366) [Fri Jun 7 03:18:35 2013] XMMSAS bgd. selection expression = annulus(25379.273132, 28548.868347, 1087.500000, 2175.000000, X, Y) && !ellipse(24228.153080, 30743.665000, 460.616813, 389.387211, 330.750100, X, Y) && !ellipse(25772.092682, 30316.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25189.151794, 29874.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26568.675812, 29412.610443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23287.914520, 29260.615326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27339.684000, 28501.476000, 2519.184072, 1571.960045, 12.760100, X, Y) && !ellipse(28109.917664, 28108.656525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25873.960846, 27684.459839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.178000, 27288.160000, 513.032015, 342.022410, 72.528600, X, Y) && !ellipse(27636.218000, 26973.518000, 1178.824034, 562.941616, 49.194000, X, Y) && !ellipse(25278.597076, 26728.912140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24189.915588, 26898.584442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.456848, 26379.127960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.723175, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23438.815400, 26095.098000, 503.906414, 420.396012, 76.054100, X, Y) && !ellipse(26770.423800, 26045.524800, 690.407220, 412.193612, 118.792100, X, Y) && !ellipse(28573.332000, 29240.234000, 1259.592036, 1259.592036, 0.000000, X, Y) && !ellipse(24550.845581, 26258.942749, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 7 03:18:35 2013] Writing fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88.gif [Fri Jun 7 05:26:36 2013] Mean detx,y = (-2797.84, -570.74) [Fri Jun 7 05:26:40 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 7 05:27:03 2013] Binned source spectrum to 10 counts/bin [Fri Jun 7 05:27:04 2013] Setting source spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Fri Jun 7 05:27:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_bgd.pi.gz [Fri Jun 7 08:31:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Jun 7 08:31:34 2013] rmf not generated due to insufficient counts [Fri Jun 7 14:16:24 2013] Updating aperture counts using extracted products [Fri Jun 7 14:16:24 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 900.00 [Fri Jun 7 14:16:24 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_bgd.pi.gz = 752.00 [Fri Jun 7 14:16:24 2013] Got source and background scale factors 896128.000000, 1120066.000000 [Fri Jun 7 14:16:24 2013] User source parameters: Position = (292.3, 328.7) = 0 42 54.48 41 17 31.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 298.3 +/- 31.0 Background aperture counts = 601.7 Rate = 0.02 +/- 0.002 [Fri Jun 7 14:16:24 2013] Updating counts from extracted products [Fri Jun 7 14:16:24 2013] Set source signif. to 298.35/24.53 = 12.16 [Fri Jun 7 14:16:34 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 7 14:16:34 2013] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88.arf [Fri Jun 7 14:16:34 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 7 14:16:34 2013] Updating source flux to 7.7e-14 [Fri Jun 7 14:18:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 7 14:18:38 2013] xmm0674210401/analysis//spectral/fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete