[Thu Jun  6 01:03:17 2013] Detection parameters:
  Position = (360.3, 258.0) = 0 42 28.24 41 12 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2652.2 +/- 62.0
  Background counts = 78.4
  Rate = 0.2 +/- 0.005

[Thu Jun  6 01:03:22 2013] Off-axis axis estimate = 5.36'
[Thu Jun  6 01:09:05 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:09:05 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Thu Jun  6 01:09:05 2013] source mask rpix=2.1, npix_max = 26, mask sum = 26, frac = 0.966
[Thu Jun  6 01:09:05 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 9.11"
[Thu Jun  6 08:00:32 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src54.ximg exists
[Thu Jun  6 08:00:32 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src54_1.ximg exists
[Thu Jun  6 08:00:32 2013] Fit fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src54 appears to have run properly
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Thu Jun  6 08:00:34 2013] Fit fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Thu Jun  6 15:51:58 2013] Spatial fit model total counts = 3192.490000, observed total counts = 2914.000000
[Thu Jun  6 15:51:58 2013] Offset between fit and detection position for source 58 = 0.268092 pixels
[Thu Jun  6 15:51:58 2013] 3184.860000 total counts/ 1266.860000 bgd. counts: snr = 53.887035
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.268092 pixels
  Position = (360.3, 258.3) = 0 42 28.25 41 12 22.9
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1918.0 +/- 56.4
  Background counts = 1266.9
  Rate = 0.1 +/- 0.003
[Thu Jun  6 15:51:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:51:58 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 15:51:58 2013] Source does appear to be extended
[Thu Jun  6 15:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 15:52:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 15:52:53 2013] Initial guess for spatial extent in simple fitting = 5.45"
[Thu Jun  6 15:52:53 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.732
[Thu Jun  6 15:52:53 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 5.45"
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src54.ximg exists
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu Jun  6 20:38:57 2013] Fit fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src54 appears to have run properly
[Thu Jun  6 20:38:59 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu Jun  6 20:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu Jun  6 20:38:59 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu Jun  6 20:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu Jun  6 20:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:09 2013] Spatial fit model total counts = 3182.810000, observed total counts = 2914.000000
[Fri Jun  7 03:17:09 2013] Offset between fit and detection position for source 58 = 0.012429 pixels
[Fri Jun  7 03:17:09 2013] 3175.610000 total counts/ 1267.220000 bgd. counts: snr = 53.609422
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.012429 pixels
  Position = (360.3, 258.3) = 0 42 28.24 41 12 22.9
  Extent = 5.5 (5.2-5.8)" x 5.4 (5.0-5.6)", rotation angle = 136 (90-90) degrees
  Source counts = 1908.4 +/- 56.4
  Background counts = 1267.2
  Rate = 0.1 +/- 0.003
[Fri Jun  7 03:17:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:09 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 03:17:09 2013] Source does appear to be extended
[Fri Jun  7 03:17:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Fri Jun  7 03:18:33 2013] Counts = 1908.390000, rescaling region sizes by 2.000000
[Fri Jun  7 03:18:33 2013] XMMSAS src. selection expression = ellipse(31299.746400, 22424.006200, 659.940019, 642.631218, 135.882700, X, Y)
[Fri Jun  7 03:18:33 2013] Writing source region out to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_src.reg
[Fri Jun  7 03:18:33 2013] Extracting stamp from image fullrun_pn_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (322, 220) - (398, 296)
[Fri Jun  7 03:18:33 2013] XMMSAS bgd. selection expression = annulus(31299.746400, 22424.006200, 2199.800063, 4399.600127, X, Y) && !ellipse(28973.583600, 26835.761400, 1336.005638, 1254.643236, 18.009400, X, Y) && !ellipse(27339.684000, 28501.476000, 2519.184072, 1571.960045, 12.760100, X, Y) && !ellipse(30039.433655, 27198.780640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.178000, 27288.160000, 513.032015, 342.022410, 72.528600, X, Y) && !ellipse(30661.862793, 27186.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.218000, 26973.518000, 1178.824034, 562.941616, 49.194000, X, Y) && !ellipse(32841.612640, 26752.459595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.723175, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.226000, 26266.718000, 393.426411, 375.972011, 31.040700, X, Y) && !ellipse(26770.423800, 26045.524800, 690.407220, 412.193612, 118.792100, X, Y) && !ellipse(28127.657000, 25276.185800, 386.333611, 304.034409, 354.945870, X, Y) && !ellipse(32460.963745, 24499.364563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.974640, 24937.420502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33485.940460, 24402.238281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28528.781800, 23709.384400, 388.630411, 388.630411, 0.000000, X, Y) && !ellipse(32003.483612, 23955.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.169000, 23844.350600, 358.551210, 285.084808, 143.194000, X, Y) && !ellipse(30433.660370, 23442.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34267.291687, 22627.829102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33542.384620, 22442.880000, 452.294413, 407.159212, 107.256299, X, Y) && !ellipse(27566.307200, 21522.911000, 417.646412, 417.646412, 0.000000, X, Y) && !ellipse(31324.220917, 19551.015213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35078.190800, 29148.938000, 2953.552085, 752.323222, 0.000000, X, Y) && !ellipse(35306.186000, 28159.362000, 1476.776042, 1476.776042, 0.000000, X, Y) && !ellipse(29196.767181, 27594.961456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31909.769600, 27995.088000, 1447.792042, 1447.792042, 0.000000, X, Y) && !ellipse(35347.782410, 25772.934326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.029907, 24584.219299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27745.613129, 24259.047241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35051.162537, 20557.046967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28456.234375, 20187.509369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35979.443085, 20123.633347, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 03:18:33 2013] Writing fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58.gif
[Fri Jun  7 05:02:51 2013] Mean detx,y = (5330.46, 2265.67) 
[Fri Jun  7 05:02:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 05:04:16 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 05:04:16 2013] Setting source spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Fri Jun  7 05:04:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Fri Jun  7 14:16:18 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:18 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 2647.00
[Fri Jun  7 14:16:18 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_bgd.pi.gz = 8975.00
[Fri Jun  7 14:16:18 2013] Got source and background scale factors 1065337.000000, 21609652.000000
[Fri Jun  7 14:16:18 2013] User source parameters:
  Position = (360.3, 258.3) = 0 42 28.24 41 12 22.9
  Extent = 5.5 (5.2-5.8)" x 5.4 (5.0-5.6)", rotation angle = 136 (90-90) degrees
  Source aperture counts = 2204.5 +/- 52.5
  Background aperture counts = 442.5
  Rate = 0.1 +/- 0.003

[Fri Jun  7 14:16:33 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:33 2013] Using photon index=1.80, rate=0.11, arf fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58.arf
[Fri Jun  7 14:16:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:33 2013] Updating source flux to 4.7e-13
[Fri Jun  7 14:18:38 2013] xmm0674210401/analysis//spectral/fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete