[Thu Jun  6 01:03:17 2013] Detection parameters:
  Position = (345.8, 313.2) = 0 42 33.81 41 16 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 691.5 +/- 37.5
  Background counts = 95.8
  Rate = 0.05 +/- 0.003

[Thu Jun  6 01:03:22 2013] Off-axis axis estimate = 3.60'
[Thu Jun  6 01:09:05 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:09:05 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Thu Jun  6 01:09:05 2013] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.918
[Thu Jun  6 01:09:05 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 8.23"
[Thu Jun  6 08:00:31 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun  6 08:00:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30.csv
[Thu Jun  6 08:00:31 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun  6 08:00:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30.csv
[Thu Jun  6 08:00:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun  6 08:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun  6 08:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun  6 08:00:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:51:58 2013] Spatial fit model total counts = 7255.920000, observed total counts = 5956.000000
[Thu Jun  6 15:51:58 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 15:51:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:51:58 2013] Assessing source extent using major
[Thu Jun  6 15:51:58 2013] Source does appear to be extended
[Thu Jun  6 15:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 15:51:58 2013] Source is confused with source 34
[Thu Jun  6 15:52:53 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 15:52:53 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Thu Jun  6 15:52:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.918
[Thu Jun  6 15:52:53 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.23"
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30.ximg exists
[Thu Jun  6 20:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30.csv
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Jun  6 20:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30.csv
[Thu Jun  6 20:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 20:38:58 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Jun  6 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Jun  6 20:38:58 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Jun  6 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Jun  6 20:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:08 2013] Warning, spatial fit 30 centroid is now closest to src. 34
[Fri Jun  7 03:17:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:09 2013] Assessing source extent using major
[Fri Jun  7 03:17:09 2013] Source does appear to be extended
[Fri Jun  7 03:17:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 03:18:30 2013] XMMSAS src. selection expression = ellipse(30039.433655, 27198.780640, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 03:18:30 2013] Writing source region out to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_src.reg
[Fri Jun  7 03:18:30 2013] Extracting stamp from image fullrun_pn_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (308, 276) - (383, 351)
[Fri Jun  7 03:18:30 2013] XMMSAS bgd. selection expression = annulus(30039.433655, 27198.780640, 1087.500000, 2175.000000, X, Y) && !ellipse(28973.583600, 26835.761400, 1336.005638, 1254.643236, 18.009400, X, Y) && !ellipse(27339.684000, 28501.476000, 2519.184072, 1571.960045, 12.760100, X, Y) && !ellipse(28109.917664, 28108.656525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30661.862793, 27186.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.218000, 26973.518000, 1178.824034, 562.941616, 49.194000, X, Y) && !ellipse(32841.612640, 26752.459595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.723175, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.226000, 26266.718000, 393.426411, 375.972011, 31.040700, X, Y) && !ellipse(28127.657000, 25276.185800, 386.333611, 304.034409, 354.945870, X, Y) && !ellipse(32460.963745, 24499.364563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.974640, 24937.420502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28573.332000, 29240.234000, 1259.592036, 1259.592036, 0.000000, X, Y) && !ellipse(35078.190800, 29148.938000, 2953.552085, 752.323222, 0.000000, X, Y) && !ellipse(29196.767181, 27594.961456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31909.769600, 27995.088000, 1447.792042, 1447.792042, 0.000000, X, Y) && !ellipse(27745.613129, 24259.047241, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 03:18:30 2013] Writing fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32.gif
[Fri Jun  7 04:06:54 2013] Mean detx,y = (2295.49, -1577.56) 
[Fri Jun  7 04:06:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 04:07:30 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 04:07:31 2013] Setting source spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jun  7 04:07:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Jun  7 06:21:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 06:21:39 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:10 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:10 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 4207.00
[Fri Jun  7 14:16:10 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_bgd.pi.gz = 2195.00
[Fri Jun  7 14:16:10 2013] Got source and background scale factors 1091950.000000, 2660835.000000
[Fri Jun  7 14:16:10 2013] User source parameters:
  Position = (345.8, 313.2) = 0 42 33.81 41 16 19.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3306.2 +/- 65.9
  Background aperture counts = 900.8
  Rate = 0.2 +/- 0.004

[Fri Jun  7 14:16:10 2013] Updating counts from extracted products
[Fri Jun  7 14:16:10 2013] Set source signif. to 3306.22/30.01 = 110.16
[Fri Jun  7 14:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:32 2013] Using photon index=1.80, rate=0.191, arf fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32.arf
[Fri Jun  7 14:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:32 2013] Updating source flux to 6.6e-13
[Fri Jun  7 14:18:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:38 2013] xmm0674210401/analysis//spectral/fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete