[Thu Jun  6 01:03:16 2013] Detection parameters:
  Position = (316.6, 327.5) = 0 42 45.10 41 17 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 707.8 +/- 36.4
  Background counts = 90.7
  Rate = 0.05 +/- 0.003

[Thu Jun  6 01:03:22 2013] Off-axis axis estimate = 2.48'
[Thu Jun  6 01:09:05 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:09:05 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Thu Jun  6 01:09:05 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.025
[Thu Jun  6 01:09:05 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.67"
[Thu Jun  6 08:00:31 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun  6 08:00:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26.csv
[Thu Jun  6 08:00:31 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun  6 08:00:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26.csv
[Thu Jun  6 08:00:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun  6 08:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun  6 08:00:33 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun  6 08:00:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun  6 08:00:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:51:58 2013] Spatial fit model total counts = 4059.130000, observed total counts = 3183.000000
[Thu Jun  6 15:51:58 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 15:51:58 2013] Source 28 is offset by -0.594714 and -3.576830 pixels which is larger than
2 X fitted extent = 1.716630 x 1.716630, not incorporating fit results
[Thu Jun  6 15:51:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:51:58 2013] Assessing source extent using major
[Thu Jun  6 15:51:58 2013] Source does appear to be extended
[Thu Jun  6 15:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 15:52:53 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 15:52:53 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Thu Jun  6 15:52:53 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.025
[Thu Jun  6 15:52:53 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 7.67"
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jun  6 20:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26.csv
[Thu Jun  6 20:38:57 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jun  6 20:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26.csv
[Thu Jun  6 20:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 20:38:58 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jun  6 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun  6 20:38:58 2013] fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jun  6 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun  6 20:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:08 2013] Spatial fit model total counts = 4012.760000, observed total counts = 3183.000000
[Fri Jun  7 03:17:08 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:17:09 2013] Spatial fit model total counts = 3691.160000, observed total counts = 3400.000000
[Fri Jun  7 03:17:09 2013] Offset between fit and detection position for source 28 = 1.865398 pixels
[Fri Jun  7 03:17:09 2013] Warning, changing simple spatial fit ID from 26 to 70
[Fri Jun  7 03:17:09 2013] 3699.933000 total counts/ 3088.940000 bgd. counts: snr = 10.993387
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.865398 pixels
  Position = (314.8, 328.2) = 0 42 45.78 41 17 26.9
  Extent = 31.5 (27.5-63.0)" x 19.6 (14.8-25.7)", rotation angle = 13
  Source counts = 611.0 +/- 60.8
  Background counts = 3088.9
  Rate = 0.04 +/- 0.004
[Fri Jun  7 03:17:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:09 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 03:17:09 2013] Source does appear to be extended
[Fri Jun  7 03:17:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Fri Jun  7 03:17:09 2013] Source is confused with source 25
[Fri Jun  7 03:18:30 2013] XMMSAS src. selection expression = ellipse(27339.684000, 28501.476000, 1889.388054, 1178.970034, 12.760100, X, Y)
[Fri Jun  7 03:18:30 2013] Writing source region out to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_src.reg
[Fri Jun  7 03:18:30 2013] Extracting stamp from image fullrun_pn_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (206, 220) - (423, 437)
[Fri Jun  7 03:18:30 2013] XMMSAS bgd. selection expression = annulus(27339.684000, 28501.476000, 3148.980091, 6297.960181, X, Y) && !ellipse(28973.583600, 26835.761400, 1336.005638, 1254.643236, 18.009400, X, Y) && !ellipse(23412.629211, 33193.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29748.787598, 31646.384827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30622.626770, 31100.906403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31819.649384, 30660.046753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.153080, 30743.665000, 460.616813, 389.387211, 330.750100, X, Y) && !ellipse(25772.092682, 30316.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.086800, 30055.473800, 354.589610, 354.589610, 0.000000, X, Y) && !ellipse(25189.151794, 29874.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26568.675812, 29412.610443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23287.914520, 29260.615326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.917664, 28108.656525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25873.960846, 27684.459839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30039.433655, 27198.780640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.178000, 27288.160000, 513.032015, 342.022410, 72.528600, X, Y) && !ellipse(30661.862793, 27186.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.218000, 26973.518000, 1178.824034, 562.941616, 49.194000, X, Y) && !ellipse(32841.612640, 26752.459595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25278.597076, 26728.912140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24189.915588, 26898.584442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.456848, 26379.127960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.723175, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.226000, 26266.718000, 393.426411, 375.972011, 31.040700, X, Y) && !ellipse(23438.815400, 26095.098000, 503.906414, 420.396012, 76.054100, X, Y) && !ellipse(26770.423800, 26045.524800, 690.407220, 412.193612, 118.792100, X, Y) && !ellipse(21746.249600, 25392.344600, 481.574414, 415.438412, 81.641048, X, Y) && !ellipse(28127.657000, 25276.185800, 386.333611, 304.034409, 354.945870, X, Y) && !ellipse(32460.963745, 24499.364563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.974640, 24937.420502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33485.940460, 24402.238281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28528.781800, 23709.384400, 388.630411, 388.630411, 0.000000, X, Y) && !ellipse(32003.483612, 23955.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.169000, 23844.350600, 358.551210, 285.084808, 143.194000, X, Y) && !ellipse(30433.660370, 23442.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22183.673233, 22936.335541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34267.291687, 22627.829102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31299.746400, 22424.006200, 439.960013, 428.420812, 135.882700, X, Y) && !ellipse(33542.384620, 22442.880000, 452.294413, 407.159212, 107.256299, X, Y) && !ellipse(27136.010437, 33155.702606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.547058, 32806.810516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34172.581482, 32199.026520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22440.012329, 31951.893738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21977.388077, 30330.483276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28573.332000, 29240.234000, 1259.592036, 1259.592036, 0.000000, X, Y) && !ellipse(35078.190800, 29148.938000, 2953.552085, 752.323222, 0.000000, X, Y) && !ellipse(25379.273132, 28548.868347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.767181, 27594.961456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31909.769600, 27995.088000, 1447.792042, 1447.792042, 0.000000, X, Y) && !ellipse(24550.845581, 26258.942749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25528.658356, 25086.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.029907, 24584.219299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27745.613129, 24259.047241, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 03:18:30 2013] Writing fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28.gif
[Fri Jun  7 04:02:27 2013] Mean detx,y = (-750.40, -911.09) 
[Fri Jun  7 04:02:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 04:04:02 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 04:04:03 2013] Setting source spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun  7 04:04:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Jun  7 14:16:08 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:08 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 16533.00
[Fri Jun  7 14:16:09 2013] Total counts from fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_bgd.pi.gz = 18302.00
[Fri Jun  7 14:16:09 2013] Got source and background scale factors 5688109.000000, 43588419.000000
[Fri Jun  7 14:16:09 2013] User source parameters:
  Position = (314.8, 328.2) = 0 42 45.78 41 17 26.9
  Extent = 31.5 (27.5-63.0)" x 19.6 (14.8-25.7)", rotation angle = 13
  Source aperture counts = 14144.7 +/- 129.6
  Background aperture counts = 2388.3
  Rate = 0.8 +/- 0.007

[Fri Jun  7 14:16:31 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:31 2013] Using photon index=1.80, rate=0.0353, arf fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28.arf
[Fri Jun  7 14:16:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:31 2013] Updating source flux to 1.3e-13
[Fri Jun  7 14:18:19 2013] Flag b found in src. 28 procflags, skipping spectral fitting
[Fri Jun  7 14:18:19 2013] Flag p found in src. 28 procflags, skipping spectral fitting
[Fri Jun  7 14:18:19 2013] Flag c found in src. 28 procflags, skipping spectral fitting
[Fri Jun  7 14:18:38 2013] xmm0674210401/analysis//spectral/fullrun_pn_xmm0674210401_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete