[Thu Jun 6 01:05:27 2013] Detection parameters: Position = (306.3, 308.2) = 0 42 49.06 41 16 1.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 535.0 +/- 32.7 Background counts = 38.1 Rate = 0.03 +/- 0.002 [Thu Jun 6 01:05:30 2013] Off-axis axis estimate = 0.91' [Thu Jun 6 12:15:01 2013] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 12:15:01 2013] Initial guess for spatial extent in simple fitting = 6.88" [Thu Jun 6 12:15:01 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.923 [Thu Jun 6 12:15:01 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 6.88" [Thu Jun 6 15:51:32 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src29.ximg exists [Thu Jun 6 15:51:32 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src29_1.ximg exists [Thu Jun 6 15:51:32 2013] Fit fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src29 appears to have run properly [Thu Jun 6 15:51:33 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Thu Jun 6 15:51:33 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Thu Jun 6 15:51:33 2013] Fit fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Thu Jun 6 15:52:30 2013] Source 40 is offset by -5.243128 and -5.838250 pixels which is larger than 2 X fitted extent = 1.802777 x 2.989494, not incorporating fit results [Thu Jun 6 15:52:30 2013] Source 40 is offset by -5.063473 and -6.229537 pixels which is larger than 2 X fitted extent = 2.538989 x 1.605255, not incorporating fit results [Thu Jun 6 15:52:30 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 15:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 15:52:30 2013] Assessing source extent using major [Thu Jun 6 15:52:30 2013] Source does appear to be extended [Thu Jun 6 15:52:30 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 23:48:35 2013] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 23:48:35 2013] Initial guess for spatial extent in simple fitting = 6.88" [Thu Jun 6 23:48:35 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.923 [Thu Jun 6 23:48:35 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 6.88" [Fri Jun 7 03:16:35 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29.ximg exists [Fri Jun 7 03:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29.csv [Fri Jun 7 03:16:35 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29_1.ximg exists [Fri Jun 7 03:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29.csv [Fri Jun 7 03:16:35 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 03:16:37 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Fri Jun 7 03:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.csv [Fri Jun 7 03:16:37 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Fri Jun 7 03:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.csv [Fri Jun 7 03:16:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 03:17:50 2013] Warning, spatial fit 29 centroid is now closest to src. 7 [Fri Jun 7 03:17:50 2013] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 10.049501 pixels away [Fri Jun 7 03:17:50 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 03:17:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 03:17:50 2013] Assessing source extent using major [Fri Jun 7 03:17:50 2013] Source does appear to be extended [Fri Jun 7 03:17:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 11:42:01 2013] XMMSAS src. selection expression = ellipse(26601.207886, 26761.736267, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 7 11:42:01 2013] Writing source region out to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_src.reg [Fri Jun 7 11:42:01 2013] Extracting stamp from image fullrun_mos2_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (269, 271) - (344, 346) [Fri Jun 7 11:42:01 2013] XMMSAS bgd. selection expression = annulus(26601.207886, 26761.736267, 1087.500000, 2175.000000, X, Y) && !ellipse(28973.456200, 26826.323200, 424.216812, 386.792811, 32.202600, X, Y) && !ellipse(27057.488000, 27269.560000, 518.756015, 314.249609, 75.056300, X, Y) && !ellipse(26758.977692, 25986.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27692.767426, 26930.381073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27806.490295, 27341.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.053600, 26874.440200, 397.628811, 320.801609, 52.641200, X, Y) && !ellipse(25826.307800, 26352.311800, 371.315211, 306.187209, 47.270500, X, Y) && !ellipse(25277.466600, 26828.460200, 369.165611, 296.488009, 33.453800, X, Y) && !ellipse(28246.500336, 26053.666504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.164000, 25259.034000, 312.844009, 231.074407, 91.894950, X, Y) && !ellipse(26586.576019, 29453.649231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.256042, 28486.629150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25886.766580, 27704.640000, 432.510412, 190.123205, 41.706200, X, Y) && !ellipse(24582.316000, 29553.338000, 1296.976037, 1296.976037, 0.000000, X, Y) && !ellipse(28770.855347, 24927.950012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.472000, 25663.938000, 1123.120032, 1123.120032, 0.000000, X, Y) && !ellipse(26656.979431, 28307.050934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25994.913361, 28648.150513, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 7 11:42:01 2013] Writing fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40.gif [Fri Jun 7 12:03:47 2013] Mean detx,y = (813.40, -443.86) [Fri Jun 7 12:03:48 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 7 12:03:58 2013] Binned source spectrum to 10 counts/bin [Fri Jun 7 12:03:58 2013] Setting source spectrum file to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Fri Jun 7 12:03:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_bgd.pi.gz [Fri Jun 7 13:36:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Jun 7 13:36:35 2013] rmf not generated due to insufficient counts [Fri Jun 7 14:17:05 2013] Updating aperture counts using extracted products [Fri Jun 7 14:17:05 2013] Total counts from fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 3379.00 [Fri Jun 7 14:17:05 2013] Total counts from fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_bgd.pi.gz = 919.00 [Fri Jun 7 14:17:05 2013] Got source and background scale factors 1336000.000000, 2276916.000000 [Fri Jun 7 14:17:05 2013] User source parameters: Position = (306.3, 308.2) = 0 42 49.06 41 16 1.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2839.8 +/- 59.1 Background aperture counts = 539.2 Rate = 0.1 +/- 0.003 [Fri Jun 7 14:17:05 2013] Updating counts from extracted products [Fri Jun 7 14:17:05 2013] Set source signif. to 2839.77/23.22 = 122.29 [Fri Jun 7 14:17:18 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 7 14:17:18 2013] Using photon index=1.80, rate=0.145, arf fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40.arf [Fri Jun 7 14:17:18 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 7 14:17:18 2013] Updating source flux to 1.8e-12 [Fri Jun 7 14:18:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 7 14:18:19 2013] xmm0674210401/analysis//spectral/fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete