[Thu Jun  6 01:05:26 2013] Detection parameters:
  Position = (399.8, 344.0) = 0 42 12.98 41 18 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 379.6 +/- 24.1
  Background counts = 12.4
  Rate = 0.03 +/- 0.002

[Thu Jun  6 01:05:30 2013] Off-axis axis estimate = 8.05'
[Thu Jun  6 12:15:01 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 12:15:01 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Thu Jun  6 12:15:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.068
[Thu Jun  6 12:15:01 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.46"
[Thu Jun  6 15:51:32 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun  6 15:51:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28.csv
[Thu Jun  6 15:51:32 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun  6 15:51:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28.csv
[Thu Jun  6 15:51:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:51:33 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun  6 15:51:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun  6 15:51:33 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun  6 15:51:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun  6 15:51:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:52:30 2013] Warning, spatial fit 28 centroid is now closest to src. 58
[Thu Jun  6 15:52:30 2013] Spatial fit model total counts = 531.603000, observed total counts = 532.000000
[Thu Jun  6 15:52:30 2013] Offset between fit and detection position for source 33 = 0.799901 pixels
[Thu Jun  6 15:52:30 2013] Warning, changing simple spatial fit ID from 28 to 51
[Thu Jun  6 15:52:30 2013] 445.959100 total counts/ 380.747000 bgd. counts: snr = 3.342027
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.799901 pixels
  Position = (400.0, 344.7) = 0 42 12.88 41 18 38.6
  Extent = 6.2 (4.1-9.1)" x 3.3 (2.6-4.4)", rotation angle = 90
  Source counts = 65.2 +/- 21.1
  Background counts = 380.7
  Rate = 0.003 +/- 0.001
[Thu Jun  6 15:52:30 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:30 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 15:52:30 2013] Source does appear to be extended
[Thu Jun  6 15:52:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Thu Jun  6 23:48:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 23:48:35 2013] Initial guess for spatial extent in simple fitting = 4.74"
[Thu Jun  6 23:48:35 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.188
[Thu Jun  6 23:48:35 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 4.74"
[Fri Jun  7 03:16:35 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun  7 03:16:35 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun  7 03:16:35 2013] Fit fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_src28 appears to have run properly
[Fri Jun  7 03:16:37 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun  7 03:16:37 2013] fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun  7 03:16:37 2013] Fit fullrun_mos2_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jun  7 03:17:50 2013] Spatial fit model total counts = 535.920000, observed total counts = 514.000000
[Fri Jun  7 03:17:50 2013] Offset between fit and detection position for source 33 = 0.913808 pixels
[Fri Jun  7 03:17:50 2013] 526.761000 total counts/ 290.218000 bgd. counts: snr = 13.885065
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.913808 pixels
  Position = (399.5, 344.0) = 0 42 13.08 41 18 35.3
  Extent = 5.4 (4.9-6.2)" x 3.9 (3.4-4.4)", rotation angle = 41 (26-59) degrees
  Source counts = 236.5 +/- 23.0
  Background counts = 290.2
  Rate = 0.01 +/- 0.001
[Fri Jun  7 03:17:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:50 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 03:17:50 2013] Source does appear to be extended
[Fri Jun  7 03:17:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Fri Jun  7 11:42:01 2013] XMMSAS src. selection expression = ellipse(34709.408200, 29877.022200, 323.627409, 235.756807, 41.002800, X, Y)
[Fri Jun  7 11:42:01 2013] Writing source region out to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun  7 11:42:01 2013] Extracting stamp from image fullrun_mos2_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (381, 325) - (418, 363)
[Fri Jun  7 11:42:01 2013] XMMSAS bgd. selection expression = annulus(34709.408200, 29877.022200, 539.379016, 1078.758031, X, Y) && !ellipse(35925.646000, 29450.162000, 458.031213, 232.625607, 62.737200, X, Y) && !ellipse(34954.891174, 29114.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35544.005005, 28859.121796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34226.082977, 29176.873047, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 11:42:01 2013] Writing fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33.gif
[Fri Jun  7 12:03:29 2013] Mean detx,y = (-4930.86, 5820.20) 
[Fri Jun  7 12:03:30 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 12:03:44 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 12:03:44 2013] Setting source spectrum file to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun  7 12:03:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun  7 14:17:05 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:17:05 2013] Total counts from fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 265.00
[Fri Jun  7 14:17:05 2013] Total counts from fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_bgd.pi.gz = 70.00
[Fri Jun  7 14:17:05 2013] Got source and background scale factors 246400.000000, 956790.000000
[Fri Jun  7 14:17:05 2013] User source parameters:
  Position = (399.5, 344.0) = 0 42 13.08 41 18 35.3
  Extent = 5.4 (4.9-6.2)" x 3.9 (3.4-4.4)", rotation angle = 41 (26-59) degrees
  Source aperture counts = 247.0 +/- 17.3
  Background aperture counts = 18.0
  Rate = 0.01 +/- 0.0009

[Fri Jun  7 14:17:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:17:18 2013] Using photon index=1.80, rate=0.0121, arf fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33.arf
[Fri Jun  7 14:17:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:17:18 2013] Updating source flux to 2.8e-13
[Fri Jun  7 14:18:19 2013] xmm0674210401/analysis//spectral/fullrun_mos2_xmm0674210401_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete