[Thu Jun  6 01:04:30 2013] Detection parameters:
  Position = (404.9, 263.3) = 0 42 11.05 41 12 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.1 +/- 10.2
  Background counts = 13.1
  Rate = 0.004 +/- 0.0008

[Thu Jun  6 01:04:30 2013] Off-axis axis estimate = 8.13'
[Thu Jun  6 08:00:34 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:00:34 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Thu Jun  6 08:00:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.032
[Thu Jun  6 08:00:34 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 10.49"
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73.csv
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73.csv
[Thu Jun  6 12:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Jun  6 12:15:01 2013] Fit fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Thu Jun  6 15:52:14 2013] Spatial fit model total counts = 190.461000, observed total counts = 173.000000
[Thu Jun  6 15:52:14 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 15:52:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:14 2013] Assessing source extent using major
[Thu Jun  6 15:52:14 2013] Source does appear to be extended
[Thu Jun  6 15:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 20:39:00 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:39:00 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Thu Jun  6 20:39:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.032
[Thu Jun  6 20:39:00 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 10.49"
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70.csv
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70.csv
[Thu Jun  6 23:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jun  6 23:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:29 2013] Spatial fit model total counts = 195.228000, observed total counts = 173.000000
[Fri Jun  7 03:17:29 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:17:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:29 2013] Assessing source extent using major
[Fri Jun  7 03:17:29 2013] Source does appear to be extended
[Fri Jun  7 03:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:53:32 2013] XMMSAS src. selection expression = ellipse(35178.388885, 22856.899719, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:53:32 2013] Writing source region out to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_src.reg
[Fri Jun  7 08:53:32 2013] Extracting stamp from image fullrun_mos1_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (367, 226) - (442, 301)
[Fri Jun  7 08:53:32 2013] XMMSAS bgd. selection expression = annulus(35178.388885, 22856.899719, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.742000, 26333.728000, 1493.712043, 417.188012, 121.537100, X, Y) && !ellipse(33424.470000, 22384.484000, 748.864822, 438.740013, 330.596000, X, Y) && !ellipse(33486.601562, 24466.835144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34274.356720, 22655.927277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.955200, 23820.658200, 641.032018, 287.916008, 316.435700, X, Y)
[Fri Jun  7 08:53:32 2013] Writing fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86.gif
[Fri Jun  7 09:32:29 2013] Mean detx,y = (-132.30, 8254.57) 
[Fri Jun  7 09:32:30 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:32:48 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:32:48 2013] Setting source spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Fri Jun  7 09:32:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Fri Jun  7 11:32:34 2013] Not generating rmf since there are only 57 counts
[Fri Jun  7 11:32:34 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:53 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:53 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 138.00
[Fri Jun  7 14:16:53 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_bgd.pi.gz = 537.00
[Fri Jun  7 14:16:53 2013] Got source and background scale factors 1036226.000000, 7584113.000000
[Fri Jun  7 14:16:53 2013] User source parameters:
  Position = (404.9, 263.3) = 0 42 11.05 41 12 46.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 64.6 +/- 12.8
  Background aperture counts = 73.4
  Rate = 0.003 +/- 0.0007

[Fri Jun  7 14:16:53 2013] Updating counts from extracted products
[Fri Jun  7 14:16:53 2013] Set source signif. to 64.63/8.57 = 7.55
[Fri Jun  7 14:16:59 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:59 2013] Using photon index=1.80, rate=0.0033, arf fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86.arf
[Fri Jun  7 14:16:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:59 2013] Updating source flux to 5.7e-14
[Fri Jun  7 14:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:00 2013] xmm0674210401/analysis//spectral/fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete