[Thu Jun  6 01:04:30 2013] Detection parameters:
  Position = (456.0, 290.7) = 0 41 51.35 41 14 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 12.2
  Background counts = 8.4
  Rate = 0.005 +/- 0.0006

[Thu Jun  6 01:04:30 2013] Off-axis axis estimate = 11.43'
[Thu Jun  6 08:00:34 2013] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:00:34 2013] Initial guess for spatial extent in simple fitting = 12.15"
[Thu Jun  6 08:00:34 2013] source mask rpix=2.8, npix_max = 43, mask sum = 25, frac = 0.577
[Thu Jun  6 08:00:34 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 12.15"
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src72.ximg exists
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu Jun  6 12:14:59 2013] Fit fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src72 appears to have run properly
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu Jun  6 12:15:01 2013] Fit fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Thu Jun  6 15:52:14 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 16.483781 pixels away
[Thu Jun  6 15:52:14 2013] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 14.390876 pixels away
[Thu Jun  6 15:52:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:14 2013] Assessing source extent using major
[Thu Jun  6 15:52:14 2013] Source does appear to be extended
[Thu Jun  6 15:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 20:39:00 2013] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:39:00 2013] Initial guess for spatial extent in simple fitting = 12.15"
[Thu Jun  6 20:39:00 2013] source mask rpix=2.8, npix_max = 43, mask sum = 25, frac = 0.577
[Thu Jun  6 20:39:00 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 12.15"
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69.csv
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69.csv
[Thu Jun  6 23:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu Jun  6 23:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:29 2013] Spatial fit model total counts = 194.358000, observed total counts = 164.000000
[Fri Jun  7 03:17:29 2013] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:17:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:29 2013] Assessing source extent using major
[Fri Jun  7 03:17:29 2013] Source does appear to be extended
[Fri Jun  7 03:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:53:32 2013] XMMSAS src. selection expression = ellipse(39619.578522, 25240.667328, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:53:32 2013] Writing source region out to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_src.reg
[Fri Jun  7 08:53:32 2013] Extracting stamp from image fullrun_mos1_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (418, 253) - (493, 328)
[Fri Jun  7 08:53:32 2013] XMMSAS bgd. selection expression = annulus(39619.578522, 25240.667328, 1087.500000, 2175.000000, X, Y)
[Fri Jun  7 08:53:32 2013] Writing fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80.gif
[Fri Jun  7 09:32:17 2013] Mean detx,y = (3965.99, 11237.92) 
[Fri Jun  7 09:32:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:32:26 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:32:26 2013] Setting source spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri Jun  7 09:32:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Fri Jun  7 11:32:29 2013] Not generating rmf since there are only 89 counts
[Fri Jun  7 11:32:29 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:53 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:53 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 125.00
[Fri Jun  7 14:16:53 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_bgd.pi.gz = 502.00
[Fri Jun  7 14:16:53 2013] Got source and background scale factors 1191956.000000, 10904568.000000
[Fri Jun  7 14:16:53 2013] User source parameters:
  Position = (456.0, 290.7) = 0 41 51.35 41 14 38.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 70.1 +/- 12.2
  Background aperture counts = 54.9
  Rate = 0.004 +/- 0.0006

[Fri Jun  7 14:16:53 2013] Updating counts from extracted products
[Fri Jun  7 14:16:53 2013] Set source signif. to 70.13/7.41 = 9.47
[Fri Jun  7 14:16:59 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:59 2013] Using photon index=1.80, rate=0.00358, arf fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80.arf
[Fri Jun  7 14:16:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:59 2013] Updating source flux to 7.8e-14
[Fri Jun  7 14:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:00 2013] xmm0674210401/analysis//spectral/fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete