[Thu Jun  6 01:04:29 2013] Detection parameters:
  Position = (394.2, 335.8) = 0 42 15.12 41 18 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.5 +/- 12.6
  Background counts = 16.5
  Rate = 0.005 +/- 0.0008

[Thu Jun  6 01:04:30 2013] Off-axis axis estimate = 7.45'
[Thu Jun  6 08:00:34 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:00:34 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Thu Jun  6 08:00:34 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Thu Jun  6 08:00:34 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 10.16"
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68.csv
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68.csv
[Thu Jun  6 12:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu Jun  6 12:15:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jun  6 12:15:01 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu Jun  6 12:15:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jun  6 12:15:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:52:14 2013] Warning, spatial fit 68 centroid is now closest to src. 73
[Thu Jun  6 15:52:14 2013] Spatial fit model total counts = 256.791000, observed total counts = 220.000000
[Thu Jun  6 15:52:14 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 15:52:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:14 2013] Assessing source extent using major
[Thu Jun  6 15:52:14 2013] Source does appear to be extended
[Thu Jun  6 15:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 20:39:00 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:39:00 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Thu Jun  6 20:39:00 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Thu Jun  6 20:39:00 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 10.16"
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66.csv
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66_1.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66.csv
[Thu Jun  6 23:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Thu Jun  6 23:48:35 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Thu Jun  6 23:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Thu Jun  6 23:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:29 2013] Spatial fit model total counts = 400.003000, observed total counts = 361.000000
[Fri Jun  7 03:17:29 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:17:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:29 2013] Assessing source extent using major
[Fri Jun  7 03:17:29 2013] Source does appear to be extended
[Fri Jun  7 03:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:53:32 2013] XMMSAS src. selection expression = ellipse(34249.229523, 29165.538727, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:53:32 2013] Writing source region out to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_src.reg
[Fri Jun  7 08:53:32 2013] Extracting stamp from image fullrun_mos1_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (357, 298) - (432, 373)
[Fri Jun  7 08:53:32 2013] XMMSAS bgd. selection expression = annulus(34249.229523, 29165.538727, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.742000, 26333.728000, 1493.712043, 417.188012, 121.537100, X, Y) && !ellipse(32841.763977, 26756.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35942.676239, 29441.550262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31824.545258, 30625.802185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34723.592987, 29884.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34950.757294, 29099.792236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35564.573517, 28820.469879, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 08:53:32 2013] Writing fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70.gif
[Fri Jun  7 09:31:13 2013] Mean detx,y = (5184.56, 4800.96) 
[Fri Jun  7 09:31:14 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:31:40 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:31:40 2013] Setting source spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Fri Jun  7 09:31:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Fri Jun  7 11:32:10 2013] Not generating rmf since there are only 82 counts
[Fri Jun  7 11:32:10 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:52 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:52 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 228.00
[Fri Jun  7 14:16:52 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_bgd.pi.gz = 556.00
[Fri Jun  7 14:16:52 2013] Got source and background scale factors 1273416.000000, 6086935.000000
[Fri Jun  7 14:16:52 2013] User source parameters:
  Position = (394.2, 335.8) = 0 42 15.12 41 18 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.7 +/- 16.1
  Background aperture counts = 116.3
  Rate = 0.006 +/- 0.0008

[Fri Jun  7 14:16:52 2013] Updating counts from extracted products
[Fri Jun  7 14:16:52 2013] Set source signif. to 111.68/10.79 = 10.36
[Fri Jun  7 14:16:59 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:59 2013] Using photon index=1.80, rate=0.00569, arf fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70.arf
[Fri Jun  7 14:16:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:59 2013] Updating source flux to 8.2e-14
[Fri Jun  7 14:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:00 2013] xmm0674210401/analysis//spectral/fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete