[Thu Jun  6 01:04:28 2013] Detection parameters:
  Position = (385.5, 281.8) = 0 42 18.54 41 14 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 634.7 +/- 30.5
  Background counts = 18.7
  Rate = 0.04 +/- 0.002

[Thu Jun  6 01:04:30 2013] Off-axis axis estimate = 6.42'
[Thu Jun  6 08:00:34 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:00:34 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Thu Jun  6 08:00:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Thu Jun  6 08:00:34 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.64"
[Thu Jun  6 12:14:58 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun  6 12:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21.csv
[Thu Jun  6 12:14:58 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun  6 12:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21.csv
[Thu Jun  6 12:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:15:00 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun  6 12:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun  6 12:15:00 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun  6 12:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun  6 12:15:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:52:14 2013] Warning, spatial fit 21 centroid is now closest to src. 45
[Thu Jun  6 15:52:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:14 2013] Assessing source extent using major
[Thu Jun  6 15:52:14 2013] Source does appear to be extended
[Thu Jun  6 15:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 20:39:00 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:39:00 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Thu Jun  6 20:39:00 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Thu Jun  6 20:39:00 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.64"
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20.csv
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20.csv
[Thu Jun  6 23:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun  6 23:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:29 2013] Spatial fit model total counts = 953.630000, observed total counts = 828.000000
[Fri Jun  7 03:17:29 2013] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:17:29 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.746749 pixels away
[Fri Jun  7 03:17:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:29 2013] Assessing source extent using major
[Fri Jun  7 03:17:29 2013] Source does appear to be extended
[Fri Jun  7 03:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:53:30 2013] XMMSAS src. selection expression = ellipse(33486.601562, 24466.835144, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:53:30 2013] Writing source region out to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun  7 08:53:30 2013] Extracting stamp from image fullrun_mos1_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (348, 244) - (423, 319)
[Fri Jun  7 08:53:30 2013] XMMSAS bgd. selection expression = annulus(33486.601562, 24466.835144, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.742000, 26333.728000, 1493.712043, 417.188012, 121.537100, X, Y) && !ellipse(30575.946045, 27508.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.852875, 22405.350922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33424.470000, 22384.484000, 748.864822, 438.740013, 330.596000, X, Y) && !ellipse(32841.763977, 26756.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30478.229800, 27202.194200, 1350.152039, 1350.152039, 0.000000, X, Y) && !ellipse(31869.726000, 24031.419860, 822.344024, 348.213610, 21.573000, X, Y) && !ellipse(32632.130600, 23829.496200, 327.193609, 327.193609, 0.000000, X, Y) && !ellipse(32468.266000, 24500.464800, 230.753607, 230.753607, 0.000000, X, Y) && !ellipse(34274.356720, 22655.927277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35178.388885, 22856.899719, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 08:53:30 2013] Writing fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43.gif
[Fri Jun  7 09:17:02 2013] Mean detx,y = (569.98, 6013.25) 
[Fri Jun  7 09:17:03 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:17:27 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:17:27 2013] Setting source spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun  7 09:17:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun  7 10:41:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 10:41:28 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:41 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:41 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 694.00
[Fri Jun  7 14:16:41 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_bgd.pi.gz = 985.00
[Fri Jun  7 14:16:41 2013] Got source and background scale factors 1028672.000000, 6101854.000000
[Fri Jun  7 14:16:41 2013] User source parameters:
  Position = (385.5, 281.8) = 0 42 18.54 41 14 1.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 527.9 +/- 27.4
  Background aperture counts = 166.1
  Rate = 0.03 +/- 0.001

[Fri Jun  7 14:16:41 2013] Updating counts from extracted products
[Fri Jun  7 14:16:41 2013] Set source signif. to 527.95/12.89 = 40.97
[Fri Jun  7 14:16:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:56 2013] Using photon index=1.80, rate=0.0269, arf fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43.arf
[Fri Jun  7 14:16:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:56 2013] Updating source flux to 4.7e-13
[Fri Jun  7 14:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:00 2013] xmm0674210401/analysis//spectral/fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete