[Thu Jun  6 01:04:28 2013] Detection parameters:
  Position = (399.7, 344.1) = 0 42 13.01 41 18 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 442.1 +/- 24.9
  Background counts = 14.1
  Rate = 0.03 +/- 0.002

[Thu Jun  6 01:04:30 2013] Off-axis axis estimate = 8.05'
[Thu Jun  6 08:00:34 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:00:34 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Thu Jun  6 08:00:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.979
[Thu Jun  6 08:00:34 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 10.45"
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30.csv
[Thu Jun  6 12:14:59 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun  6 12:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30.csv
[Thu Jun  6 12:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:15:00 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun  6 12:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun  6 12:15:00 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun  6 12:15:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun  6 12:15:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 15:52:14 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.824936 pixels away
[Thu Jun  6 15:52:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 15:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 15:52:14 2013] Assessing source extent using major
[Thu Jun  6 15:52:14 2013] Source does appear to be extended
[Thu Jun  6 15:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 20:39:00 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:39:00 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Thu Jun  6 20:39:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.979
[Thu Jun  6 20:39:00 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.45"
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29.csv
[Thu Jun  6 23:48:33 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun  6 23:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29.csv
[Thu Jun  6 23:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Jun  6 23:48:34 2013] fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun  6 23:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Jun  6 23:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674210401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:17:29 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.824936 pixels away
[Fri Jun  7 03:17:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:17:29 2013] Assessing source extent using major
[Fri Jun  7 03:17:29 2013] Source does appear to be extended
[Fri Jun  7 03:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:53:30 2013] XMMSAS src. selection expression = ellipse(34723.592987, 29884.913605, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:53:30 2013] Writing source region out to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_src.reg
[Fri Jun  7 08:53:30 2013] Extracting stamp from image fullrun_mos1_xmm0674210401_pi300-10000_cl_sm2.00.img.gz, (362, 307) - (437, 382)
[Fri Jun  7 08:53:30 2013] XMMSAS bgd. selection expression = annulus(34723.592987, 29884.913605, 1087.500000, 2175.000000, X, Y) && !ellipse(32550.742000, 26333.728000, 1493.712043, 417.188012, 121.537100, X, Y) && !ellipse(35942.676239, 29441.550262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31824.545258, 30625.802185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35655.402069, 32547.528320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34950.757294, 29099.792236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35564.573517, 28820.469879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34249.229523, 29165.538727, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 08:53:30 2013] Writing fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32.gif
[Fri Jun  7 09:20:53 2013] Mean detx,y = (5984.12, 4805.14) 
[Fri Jun  7 09:20:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:21:14 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:21:15 2013] Setting source spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jun  7 09:21:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Jun  7 10:50:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 10:50:20 2013] rmf not generated due to insufficient counts
[Fri Jun  7 14:16:43 2013] Updating aperture counts using extracted products
[Fri Jun  7 14:16:43 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 459.00
[Fri Jun  7 14:16:43 2013] Total counts from fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_bgd.pi.gz = 425.00
[Fri Jun  7 14:16:43 2013] Got source and background scale factors 1040858.000000, 6050806.000000
[Fri Jun  7 14:16:43 2013] User source parameters:
  Position = (399.7, 344.1) = 0 42 13.01 41 18 35.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 385.9 +/- 22.4
  Background aperture counts = 73.1
  Rate = 0.02 +/- 0.001

[Fri Jun  7 14:16:43 2013] Updating counts from extracted products
[Fri Jun  7 14:16:43 2013] Set source signif. to 385.89/8.55 = 45.13
[Fri Jun  7 14:16:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 14:16:57 2013] Using photon index=1.80, rate=0.0197, arf fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32.arf
[Fri Jun  7 14:16:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 14:16:57 2013] Updating source flux to 3.1e-13
[Fri Jun  7 14:17:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 14:18:00 2013] xmm0674210401/analysis//spectral/fullrun_mos1_xmm0674210401_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete