[Wed Jun  5 01:02:32 2013] Detection parameters:
  Position = (313.9, 331.1) = 0 42 45.28 41 17 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 723.6 +/- 38.1
  Background counts = 88.1
  Rate = 0.05 +/- 0.003

[Wed Jun  5 01:02:36 2013] Off-axis axis estimate = 2.62'
[Wed Jun  5 01:08:52 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 01:08:52 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Jun  5 01:08:52 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Jun  5 01:08:52 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 7.74"
[Wed Jun  5 07:07:43 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79.ximg exists
[Wed Jun  5 07:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79.csv
[Wed Jun  5 07:07:43 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79_1.ximg exists
[Wed Jun  5 07:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79.csv
[Wed Jun  5 07:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 07:07:44 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Wed Jun  5 07:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed Jun  5 07:07:44 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Wed Jun  5 07:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed Jun  5 07:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210201_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 14:31:06 2013] Spatial fit model total counts = 1957.850000, observed total counts = 1641.000000
[Wed Jun  5 14:31:06 2013] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 14:31:07 2013] Spatial fit model total counts = 3309.010000, observed total counts = 2799.000000
[Wed Jun  5 14:31:07 2013] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 14:31:07 2013] Spatial fit model total counts = 4099.990000, observed total counts = 3464.000000
[Wed Jun  5 14:31:07 2013] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 14:31:07 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 14:31:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 14:31:07 2013] Assessing source extent using major
[Wed Jun  5 14:31:07 2013] Source does appear to be extended
[Wed Jun  5 14:31:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 14:31:07 2013] Source is confused with source 85
[Wed Jun  5 14:32:02 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 14:32:02 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Jun  5 14:32:02 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Jun  5 14:32:02 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 7.74"
[Wed Jun  5 19:00:36 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61.ximg exists
[Wed Jun  5 19:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61.csv
[Wed Jun  5 19:00:36 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61_1.ximg exists
[Wed Jun  5 19:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61.csv
[Wed Jun  5 19:00:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 19:00:38 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Wed Jun  5 19:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61.csv
[Wed Jun  5 19:00:38 2013] fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Wed Jun  5 19:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61.csv
[Wed Jun  5 19:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0674210201_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 00:48:31 2013] Spatial fit model total counts = 4084.060000, observed total counts = 3464.000000
[Thu Jun  6 00:48:31 2013] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 00:48:32 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 00:48:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 00:48:32 2013] Assessing source extent using major
[Thu Jun  6 00:48:32 2013] Source does appear to be extended
[Thu Jun  6 00:48:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 00:49:56 2013] XMMSAS src. selection expression = ellipse(27261.134003, 28754.157867, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 00:49:56 2013] Writing source region out to fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_src.reg
[Thu Jun  6 00:49:56 2013] Extracting stamp from image fullrun_pn_xmm0674210201_pi300-10000_cl_sm2.00.img.gz, (276, 294) - (351, 369)
[Thu Jun  6 00:49:56 2013] XMMSAS bgd. selection expression = annulus(27261.134003, 28754.157867, 1087.500000, 2175.000000, X, Y) && !ellipse(28747.777592, 27131.320200, 1377.931240, 1328.973638, 359.959968, X, Y) && !ellipse(27445.339935, 27273.405548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.337100, 26656.136200, 430.436812, 407.287212, 17.503500, X, Y) && !ellipse(26528.458600, 26320.907200, 591.106417, 414.185612, 117.769300, X, Y) && !ellipse(26861.028000, 27572.896000, 3494.832101, 1509.316843, 27.999100, X, Y) && !ellipse(28167.600000, 26433.538000, 1171.056034, 893.064026, 217.644000, X, Y) && !ellipse(26352.448000, 29770.828000, 386.298411, 386.298411, 0.000000, X, Y) && !ellipse(25673.506134, 28022.346832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.669739, 30921.707855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.374960, 30357.763800, 432.644012, 358.132010, 350.257680, X, Y) && !ellipse(24955.092377, 30165.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29971.900000, 29813.652000, 1362.288039, 1362.288039, 0.000000, X, Y) && !ellipse(28998.740000, 28476.094000, 2724.576078, 2724.576078, 0.000000, X, Y) && !ellipse(26636.371094, 28854.802063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.478027, 28468.030670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.229950, 28245.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.476410, 28105.672272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.831451, 28000.976501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.859955, 28230.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24856.657166, 27012.657776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30184.323914, 26986.256165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.570160, 26474.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29892.645050, 25894.587769, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 00:49:56 2013] Writing fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88.gif
[Thu Jun  6 02:48:52 2013] Mean detx,y = (-506.88, -1648.87) 
[Thu Jun  6 02:48:55 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 02:49:19 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 02:49:19 2013] Setting source spectrum file to fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu Jun  6 02:49:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Thu Jun  6 09:55:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  6 09:55:07 2013] rmf not generated due to insufficient counts
[Thu Jun  6 16:08:13 2013] Updating aperture counts using extracted products
[Thu Jun  6 16:08:13 2013] Total counts from fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 2537.00
[Thu Jun  6 16:08:13 2013] Total counts from fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_bgd.pi.gz = 149.00
[Thu Jun  6 16:08:13 2013] Got source and background scale factors 1157452.000000, 234538.000000
[Thu Jun  6 16:08:13 2013] User source parameters:
  Position = (313.9, 331.1) = 0 42 45.28 41 17 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1801.7 +/- 51.4
  Background aperture counts = 735.3
  Rate = 0.09 +/- 0.003

[Thu Jun  6 16:08:13 2013] Updating counts from extracted products
[Thu Jun  6 16:08:13 2013] Set source signif. to 1801.68/27.12 = 66.44
[Thu Jun  6 16:08:21 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 16:08:21 2013] Using photon index=1.80, rate=0.0948, arf fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88.arf
[Thu Jun  6 16:08:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 16:08:21 2013] Updating source flux to 3.6e-13
[Thu Jun  6 16:09:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 16:09:49 2013] xmm0674210201/analysis//spectral/fullrun_pn_xmm0674210201_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete