[Fri May 17 21:57:31 2013] Detection parameters:
  Position = (303.2, 198.0) = 14 30 57.07 32 46 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 16.9
  Background counts = 41.7
  Rate = 0.005 +/- 0.0006

[Fri May 17 21:57:31 2013] Off-axis axis estimate = 7.29'
[Fri May 17 22:49:35 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:49:35 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May 17 22:49:35 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Fri May 17 22:49:35 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.07"
[Fri May 17 23:25:16 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9.ximg exists
[Fri May 17 23:25:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9.csv
[Fri May 17 23:25:16 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri May 17 23:25:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9.csv
[Fri May 17 23:25:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 23:25:16 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri May 17 23:25:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 17 23:25:16 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 17 23:25:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 17 23:25:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674040201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 23:55:46 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.236536 pixels away
[Fri May 17 23:55:46 2013] Vigneting correction estimate = 1.000000
[Fri May 17 23:55:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 23:55:46 2013] Assessing source extent using major
[Fri May 17 23:55:46 2013] Source does appear to be extended
[Fri May 17 23:55:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:37:23 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat May 18 00:37:23 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Sat May 18 00:37:23 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Sat May 18 00:37:23 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.07"
[Sat May 18 01:19:00 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 18 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9.csv
[Sat May 18 01:19:00 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 18 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9.csv
[Sat May 18 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 01:19:01 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 18 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat May 18 01:19:01 2013] fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 18 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat May 18 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0674040201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 02:08:04 2013] Source 17 is offset by -2.910948 and 9.112823 pixels which is larger than
2 X fitted extent = 1.246609 x 1.246609, not incorporating fit results
[Sat May 18 02:08:04 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.651106 pixels away
[Sat May 18 02:08:04 2013] Vigneting correction estimate = 1.000000
[Sat May 18 02:08:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 02:08:04 2013] Assessing source extent using major
[Sat May 18 02:08:04 2013] Source does appear to be extended
[Sat May 18 02:08:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 03:32:46 2013] XMMSAS src. selection expression = ellipse(26334.053528, 17178.511566, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 03:32:46 2013] Writing source region out to fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_src.reg
[Sat May 18 03:32:46 2013] Extracting stamp from image fullrun_mos1_xmm0674040201_pi300-10000_cl_sm2.00.img.gz, (266, 161) - (341, 236)
[Sat May 18 03:32:46 2013] XMMSAS bgd. selection expression = annulus(26334.053528, 17178.511566, 1087.500000, 2175.000000, X, Y) && !ellipse(26318.381060, 15445.239800, 602.242417, 413.017612, 344.985700, X, Y) && !ellipse(27420.010956, 15423.202667, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 03:32:46 2013] Writing fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17.gif
[Sat May 18 03:36:11 2013] Mean detx,y = (7300.12, -393.26) 
[Sat May 18 03:36:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:36:39 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:36:40 2013] Setting source spectrum file to fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat May 18 03:36:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat May 18 03:53:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 03:53:43 2013] rmf not generated due to insufficient counts
[Sat May 18 04:34:47 2013] Updating aperture counts using extracted products
[Sat May 18 04:34:48 2013] Total counts from fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 278.00
[Sat May 18 04:34:48 2013] Total counts from fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1120.00
[Sat May 18 04:34:48 2013] Got source and background scale factors 1322138.000000, 8702328.000000
[Sat May 18 04:34:48 2013] User source parameters:
  Position = (303.2, 198.0) = 14 30 57.07 32 46 8.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 107.8 +/- 17.7
  Background aperture counts = 170.2
  Rate = 0.003 +/- 0.0005

[Sat May 18 04:34:48 2013] Updating counts from extracted products
[Sat May 18 04:34:48 2013] Set source signif. to 107.84/13.04 = 8.27
[Sat May 18 04:34:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 04:34:52 2013] Using photon index=1.80, rate=0.0033, arf fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17.arf
[Sat May 18 04:34:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 04:34:52 2013] Updating source flux to 4.2e-14
[Sat May 18 04:35:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 04:35:07 2013] xmm0674040201/analysis//spectral/fullrun_mos1_xmm0674040201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete