[Thu Jun 27 13:03:21 2013] Detection parameters:
  Position = (93.8, 292.3) = 15 17 39.46 56 19 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.5 +/- 11.0
  Background counts = 6.0
  Rate = 0.004 +/- 0.0006

[Thu Jun 27 13:03:21 2013] Off-axis axis estimate = 14.84'
[Thu Jun 27 14:01:44 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 14:01:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 27 14:01:44 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Thu Jun 27 14:01:44 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.811
[Thu Jun 27 14:01:44 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.85"
[Thu Jun 27 14:28:58 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 27 14:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11.csv
[Thu Jun 27 14:28:58 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 27 14:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11.csv
[Thu Jun 27 14:28:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 14:28:58 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 27 14:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 27 14:28:58 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 27 14:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jun 27 14:28:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 14:29:14 2013] Spatial fit model total counts = 156.025000, observed total counts = 113.000000
[Thu Jun 27 14:29:14 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 27 14:29:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 14:29:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 14:29:14 2013] Assessing source extent using major
[Thu Jun 27 14:29:14 2013] Source does appear to be extended
[Thu Jun 27 14:29:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 15:29:31 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 15:29:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 27 15:29:31 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Thu Jun 27 15:29:31 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.811
[Thu Jun 27 15:29:31 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 13.85"
[Thu Jun 27 15:56:34 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 27 15:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11.csv
[Thu Jun 27 15:56:34 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 27 15:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11.csv
[Thu Jun 27 15:56:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 15:56:34 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 27 15:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 27 15:56:34 2013] fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 27 15:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 27 15:56:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 15:56:48 2013] Spatial fit model total counts = 156.025000, observed total counts = 113.000000
[Thu Jun 27 15:56:48 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 27 15:56:48 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 15:56:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 15:56:48 2013] Assessing source extent using major
[Thu Jun 27 15:56:48 2013] Source does appear to be extended
[Thu Jun 27 15:56:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 16:40:24 2013] XMMSAS src. selection expression = ellipse(8111.623688, 25382.857422, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 27 16:40:24 2013] Writing source region out to fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 27 16:40:24 2013] Extracting stamp from image fullrun_mos2_xmm0673920301_pi300-10000_cl_sm2.00.img.gz, (56, 255) - (131, 330)
[Thu Jun 27 16:40:24 2013] XMMSAS bgd. selection expression = annulus(8111.623688, 25382.857422, 1087.500000, 2175.000000, X, Y) && !ellipse(9936.130000, 26674.416200, 250.527207, 250.527207, 0.000000, X, Y)
[Thu Jun 27 16:40:24 2013] Writing fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3.gif
[Thu Jun 27 16:41:59 2013] Mean detx,y = (-16541.44, -2512.79) 
[Thu Jun 27 16:41:59 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 16:42:09 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 16:42:09 2013] Setting source spectrum file to fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 27 16:42:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 27 16:47:43 2013] Not generating rmf since there are only 76 counts
[Thu Jun 27 16:47:43 2013] rmf not generated due to insufficient counts
[Thu Jun 27 16:49:07 2013] Updating aperture counts using extracted products
[Thu Jun 27 16:49:07 2013] Total counts from fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 90.00
[Thu Jun 27 16:49:07 2013] Total counts from fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 194.00
[Thu Jun 27 16:49:07 2013] Got source and background scale factors 1033166.000000, 6006784.000000
[Thu Jun 27 16:49:07 2013] User source parameters:
  Position = (93.8, 292.3) = 15 17 39.46 56 19 14.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 56.6 +/- 10.5
  Background aperture counts = 33.4
  Rate = 0.003 +/- 0.0006

[Thu Jun 27 16:49:07 2013] Updating counts from extracted products
[Thu Jun 27 16:49:07 2013] Set source signif. to 56.63/5.78 = 9.80
[Thu Jun 27 16:49:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 16:49:09 2013] Using photon index=1.80, rate=0.00306, arf fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3.arf
[Thu Jun 27 16:49:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 16:49:09 2013] Updating source flux to 8.6e-14
[Thu Jun 27 16:49:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 27 16:49:12 2013] xmm0673920301/analysis//spectral/fullrun_mos2_xmm0673920301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete