[Thu Jun 27 13:03:06 2013] Detection parameters:
  Position = (233.9, 204.6) = 15 16 26.08 56 12 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.1 +/- 13.3
  Background counts = 9.7
  Rate = 0.009 +/- 0.001

[Thu Jun 27 13:03:06 2013] Off-axis axis estimate = 8.26'
[Thu Jun 27 13:34:08 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 13:34:08 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Thu Jun 27 13:34:08 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.876
[Thu Jun 27 13:34:08 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.56"
[Thu Jun 27 14:01:44 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 27 14:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3.csv
[Thu Jun 27 14:01:44 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 27 14:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3.csv
[Thu Jun 27 14:01:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 14:01:44 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 27 14:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 27 14:01:44 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 27 14:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 27 14:01:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673920301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 14:29:10 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.320922 pixels away
[Thu Jun 27 14:29:10 2013] Spatial fit model total counts = 219.996000, observed total counts = 201.000000
[Thu Jun 27 14:29:10 2013] Offset between fit and detection position for source 5 = 1.055367 pixels
[Thu Jun 27 14:29:10 2013] Warning, changing simple spatial fit ID from 3 to 23
[Thu Jun 27 14:29:10 2013] 218.001800 total counts/ 147.797000 bgd. counts: snr = 5.774761
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.055367 pixels
  Position = (233.9, 203.5) = 15 16 26.12 56 12 50.0
  Extent = 4.0 (3.0-5.0)", rotation angle = 0
  Source counts = 70.2 +/- 14.8
  Background counts = 147.8
  Rate = 0.004 +/- 0.0008
[Thu Jun 27 14:29:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 14:29:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 14:29:10 2013] Assessing source extent using major axis lower bound
[Thu Jun 27 14:29:10 2013] Source does appear to be extended
[Thu Jun 27 14:29:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 15:05:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 27 15:05:49 2013] Initial guess for spatial extent in simple fitting = 3.96"
[Thu Jun 27 15:05:49 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.755
[Thu Jun 27 15:05:49 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 3.96"
[Thu Jun 27 15:29:31 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 27 15:29:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2.csv
[Thu Jun 27 15:29:31 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 27 15:29:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2.csv
[Thu Jun 27 15:29:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 15:29:31 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 27 15:29:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 27 15:29:31 2013] fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 27 15:29:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 27 15:29:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673920301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 15:56:45 2013] Source 5 is offset by -0.621007 and 1.968092 pixels which is larger than
2 X fitted extent = 0.580648 x 0.580648, not incorporating fit results
[Thu Jun 27 15:56:45 2013] Spatial fit model total counts = 219.088000, observed total counts = 201.000000
[Thu Jun 27 15:56:45 2013] Offset between fit and detection position for source 5 = 0.017389 pixels
[Thu Jun 27 15:56:45 2013] Warning, changing simple spatial fit ID from 2 to 21
[Thu Jun 27 15:56:45 2013] 217.367600 total counts/ 146.598000 bgd. counts: snr = 5.844976
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.017389 pixels
  Position = (233.8, 203.5) = 15 16 26.12 56 12 49.9
  Extent = 4.0 (3.1-4.9)", rotation angle = 0
  Source counts = 70.8 +/- 14.7
  Background counts = 146.6
  Rate = 0.004 +/- 0.0008
[Thu Jun 27 15:56:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 15:56:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 15:56:45 2013] Assessing source extent using major axis lower bound
[Thu Jun 27 15:56:45 2013] Source does appear to be extended
[Thu Jun 27 15:56:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 16:31:47 2013] XMMSAS src. selection expression = ellipse(20296.426000, 17657.720000, 238.969807, 238.969807, 0.000000, X, Y)
[Thu Jun 27 16:31:47 2013] Writing source region out to fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 27 16:31:47 2013] Extracting stamp from image fullrun_mos1_xmm0673920301_pi300-10000_cl_sm2.00.img.gz, (220, 190) - (248, 217)
[Thu Jun 27 16:31:47 2013] XMMSAS bgd. selection expression = annulus(20296.426000, 17657.720000, 398.283011, 796.566023, X, Y) && !ellipse(20970.513351, 16484.853302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20823.461899, 18177.669449, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 27 16:31:47 2013] Writing fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5.gif
[Thu Jun 27 16:32:12 2013] Mean detx,y = (6333.54, 4932.43) 
[Thu Jun 27 16:32:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 16:32:18 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 16:32:18 2013] Setting source spectrum file to fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 27 16:32:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 27 16:39:09 2013] Not generating rmf since there are only 70 counts
[Thu Jun 27 16:39:09 2013] rmf not generated due to insufficient counts
[Thu Jun 27 16:49:04 2013] Updating aperture counts using extracted products
[Thu Jun 27 16:49:04 2013] Total counts from fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 79.00
[Thu Jun 27 16:49:04 2013] Total counts from fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 24.00
[Thu Jun 27 16:49:04 2013] Got source and background scale factors 168068.000000, 558415.000000
[Thu Jun 27 16:49:04 2013] User source parameters:
  Position = (233.8, 203.5) = 15 16 26.12 56 12 49.9
  Extent = 4.0 (3.1-4.9)", rotation angle = 0
  Source aperture counts = 71.8 +/- 9.9
  Background aperture counts = 7.2
  Rate = 0.004 +/- 0.0005

[Thu Jun 27 16:49:06 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 16:49:06 2013] Using photon index=1.80, rate=0.00384, arf fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5.arf
[Thu Jun 27 16:49:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 16:49:06 2013] Updating source flux to 7e-14
[Thu Jun 27 16:49:10 2013] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Jun 27 16:49:10 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 27 16:49:11 2013] xmm0673920301/analysis//spectral/fullrun_mos1_xmm0673920301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete