[Thu Sep  6 22:51:32 2012] Detection parameters:
  Position = (414.0, 238.9) = 15 10 58.73 7 9 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 533.7 +/- 31.8
  Background counts = 80.4
  Rate = 0.01 +/- 0.0007

[Thu Sep  6 22:51:33 2012] Off-axis axis estimate = 9.43'
[Thu Sep  6 22:54:24 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 22:54:24 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Thu Sep  6 22:54:24 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960
[Thu Sep  6 22:54:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.14"
[Thu Sep  6 23:36:50 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Sep  6 23:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5.csv
[Thu Sep  6 23:36:50 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Sep  6 23:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5.csv
[Thu Sep  6 23:36:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 23:36:50 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep  6 23:36:51 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep  6 23:36:51 2012] Fit fullrun_pn_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep  7 00:23:58 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.328661 pixels away
[Fri Sep  7 00:23:58 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:23:58 2012] Assessing source extent using major
[Fri Sep  7 00:23:58 2012] Source does appear to be extended
[Fri Sep  7 00:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:24:14 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:24:14 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Fri Sep  7 00:24:14 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960
[Fri Sep  7 00:24:14 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.14"
[Fri Sep  7 00:57:47 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Sep  7 00:57:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5.csv
[Fri Sep  7 00:57:47 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Sep  7 00:57:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5.csv
[Fri Sep  7 00:57:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:57:48 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep  7 00:57:48 2012] fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep  7 00:57:48 2012] Fit fullrun_pn_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep  7 01:37:57 2012] Spatial fit model total counts = 1671.140000, observed total counts = 1651.000000
[Fri Sep  7 01:37:57 2012] Offset between fit and detection position for source 5 = 0.086791 pixels
[Fri Sep  7 01:37:57 2012] 1675.575000 total counts/ 1259.780000 bgd. counts: snr = 11.714720
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.086791 pixels
  Position = (414.0, 238.8) = 15 10 58.75 7 9 6.3
  Extent = 9.3 (7.9-11.1)", rotation angle = 0
  Source counts = 415.8 +/- 40.9
  Background counts = 1259.8
  Rate = 0.01 +/- 0.001
[Fri Sep  7 01:37:57 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 01:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 01:37:57 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 01:37:57 2012] Source does appear to be extended
[Fri Sep  7 01:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 01:38:12 2012] XMMSAS src. selection expression = ellipse(35968.383632, 20728.069800, 560.182816, 560.182816, 0.000000, X, Y)
[Fri Sep  7 01:38:12 2012] Writing source region out to fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5_src.reg
[Fri Sep  7 01:38:12 2012] Extracting stamp from image fullrun_pn_xmm0673880101_pi300-10000_cl_sm2.00.img.gz, (382, 207) - (446, 271)
[Fri Sep  7 01:38:12 2012] XMMSAS bgd. selection expression = annulus(35968.383632, 20728.069800, 933.638027, 1867.276054, X, Y) && !ellipse(36851.120200, 19595.080600, 474.375214, 474.375214, 0.000000, X, Y)
[Fri Sep  7 01:38:12 2012] Writing fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5.gif
[Fri Sep  7 01:43:18 2012] Mean detx,y = (5861.39, 10420.42) 
[Fri Sep  7 01:43:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 01:43:32 2012] grppha failed
[Fri Sep  7 01:43:32 2012] Setting source spectrum file to fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5_src.pi.gz
[Fri Sep  7 01:43:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Sep  7 02:13:00 2012] Updating aperture counts using extracted products
[Fri Sep  7 02:13:00 2012] Error reading totcts from fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5_src.pi.gz
[Fri Sep  7 02:13:00 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 02:13:04 2012] Source 5 has no response, skipping
[Fri Sep  7 02:13:05 2012] xmm0673880101/analysis//spectral/fullrun_pn_xmm0673880101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete