[Thu Sep  6 22:52:14 2012] Detection parameters:
  Position = (390.5, 470.3) = 15 11 5.59 7 25 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 13.1
  Background counts = 22.8
  Rate = 0.001 +/- 0.0003

[Thu Sep  6 22:52:15 2012] Off-axis axis estimate = 14.14'
[Thu Sep  6 23:55:56 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 23:55:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 23:55:56 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Thu Sep  6 23:55:56 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.944
[Thu Sep  6 23:55:56 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.50"
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Sep  7 00:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27.csv
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Sep  7 00:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27.csv
[Fri Sep  7 00:23:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep  7 00:23:52 2012] Fit fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep  7 00:24:05 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.625825 pixels away
[Fri Sep  7 00:24:05 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:24:05 2012] Assessing source extent using major
[Fri Sep  7 00:24:05 2012] Source does appear to be extended
[Fri Sep  7 00:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 01:16:37 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 01:16:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 01:16:37 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri Sep  7 01:16:37 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.944
[Fri Sep  7 01:16:37 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 13.50"
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Sep  7 01:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25.csv
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Sep  7 01:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25.csv
[Fri Sep  7 01:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Sep  7 01:37:51 2012] Fit fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Sep  7 01:38:03 2012] Spatial fit model total counts = 324.882000, observed total counts = 323.000000
[Fri Sep  7 01:38:03 2012] Offset between fit and detection position for source 9 = 0.480780 pixels
[Fri Sep  7 01:38:03 2012] 326.258300 total counts/ 286.436000 bgd. counts: snr = 2.352949
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.480780 pixels
  Position = (390.0, 470.3) = 15 11 5.74 7 25 53.3
  Extent = 4.8 (3.4-7.7)", rotation angle = 0
  Source counts = 39.8 +/- 18.1
  Background counts = 286.4
  Rate = 0.0008 +/- 0.0004
[Fri Sep  7 01:38:03 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 01:38:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 01:38:03 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 01:38:03 2012] Source does appear to be extended
[Fri Sep  7 01:38:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:07:40 2012] XMMSAS src. selection expression = ellipse(33883.176922, 40867.895000, 288.338408, 288.338408, 0.000000, X, Y)
[Fri Sep  7 02:07:40 2012] Writing source region out to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9_src.reg
[Fri Sep  7 02:07:40 2012] Extracting stamp from image fullrun_mos2_xmm0673880101_pi300-10000_cl_sm2.00.img.gz, (373, 454) - (407, 487)
[Fri Sep  7 02:07:40 2012] XMMSAS bgd. selection expression = annulus(33883.176922, 40867.895000, 480.564014, 961.128028, X, Y)
[Fri Sep  7 02:07:40 2012] Writing fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9.gif
[Fri Sep  7 02:11:37 2012] Mean detx,y = (-12240.83, 8678.31) 
[Fri Sep  7 02:11:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 02:11:42 2012] grppha failed
[Fri Sep  7 02:11:42 2012] Setting source spectrum file to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Sep  7 02:11:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Sep  7 02:12:14 2012] Not generating rmf since there are only 39 counts
[Fri Sep  7 02:12:14 2012] rmf not generated due to insufficient counts
[Fri Sep  7 02:13:01 2012] Updating aperture counts using extracted products
[Fri Sep  7 02:13:01 2012] Error reading totcts from fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Sep  7 02:13:01 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 02:13:03 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 02:13:04 2012] xmm0673880101/analysis//spectral/fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete