[Thu Sep  6 22:52:14 2012] Detection parameters:
  Position = (393.1, 349.2) = 15 11 4.83 7 17 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 15.1
  Background counts = 27.2
  Rate = 0.003 +/- 0.0004

[Thu Sep  6 22:52:15 2012] Off-axis axis estimate = 7.79'
[Thu Sep  6 23:55:56 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 23:55:56 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Thu Sep  6 23:55:56 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Thu Sep  6 23:55:56 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.32"
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Sep  7 00:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Sep  7 00:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 00:23:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep  7 00:23:52 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep  7 00:23:52 2012] Fit fullrun_mos2_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep  7 00:24:04 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.916940 pixels away
[Fri Sep  7 00:24:05 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:24:05 2012] Assessing source extent using major
[Fri Sep  7 00:24:05 2012] Source does appear to be extended
[Fri Sep  7 00:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 01:16:37 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 01:16:37 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Fri Sep  7 01:16:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Fri Sep  7 01:16:37 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.32"
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Sep  7 01:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11.csv
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Sep  7 01:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11.csv
[Fri Sep  7 01:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep  7 01:37:51 2012] fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep  7 01:37:51 2012] Fit fullrun_mos2_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep  7 01:38:03 2012] Spatial fit model total counts = 329.000000, observed total counts = 329.000000
[Fri Sep  7 01:38:03 2012] Offset between fit and detection position for source 11 = 0.246911 pixels
[Fri Sep  7 01:38:03 2012] 328.933600 total counts/ 257.661000 bgd. counts: snr = 4.440156
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.246911 pixels
  Position = (392.9, 349.3) = 15 11 4.89 7 17 6.9
  Extent = 4.1 (3.2-5.5)", rotation angle = 0
  Source counts = 71.3 +/- 18.1
  Background counts = 257.7
  Rate = 0.001 +/- 0.0004
[Fri Sep  7 01:38:03 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 01:38:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 01:38:03 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 01:38:03 2012] Source does appear to be extended
[Fri Sep  7 01:38:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:07:39 2012] XMMSAS src. selection expression = ellipse(34136.317060, 30340.503000, 247.640407, 247.640407, 0.000000, X, Y)
[Fri Sep  7 02:07:39 2012] Writing source region out to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11_src.reg
[Fri Sep  7 02:07:39 2012] Extracting stamp from image fullrun_mos2_xmm0673880101_pi300-10000_cl_sm2.00.img.gz, (379, 335) - (407, 364)
[Fri Sep  7 02:07:39 2012] XMMSAS bgd. selection expression = annulus(34136.317060, 30340.503000, 412.734012, 825.468024, X, Y)
[Fri Sep  7 02:07:39 2012] Writing fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11.gif
[Fri Sep  7 02:09:23 2012] Mean detx,y = (-8121.17, -1010.73) 
[Fri Sep  7 02:09:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 02:09:28 2012] grppha failed
[Fri Sep  7 02:09:28 2012] Setting source spectrum file to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Sep  7 02:09:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Sep  7 02:12:13 2012] Not generating rmf since there are only 71 counts
[Fri Sep  7 02:12:13 2012] rmf not generated due to insufficient counts
[Fri Sep  7 02:13:01 2012] Updating aperture counts using extracted products
[Fri Sep  7 02:13:01 2012] Error reading totcts from fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Sep  7 02:13:01 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 02:13:03 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 02:13:04 2012] xmm0673880101/analysis//spectral/fullrun_mos2_xmm0673880101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete