[Thu Sep  6 22:51:51 2012] Detection parameters:
  Position = (361.8, 280.1) = 15 11 14.00 7 12 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 13.9
  Background counts = 30.6
  Rate = 0.003 +/- 0.0004

[Thu Sep  6 22:51:51 2012] Off-axis axis estimate = 4.78'
[Thu Sep  6 23:36:51 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 23:36:51 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Thu Sep  6 23:36:51 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.822
[Thu Sep  6 23:36:51 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.82"
[Thu Sep  6 23:55:55 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Sep  6 23:55:55 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Sep  6 23:55:55 2012] Fit fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Sep  6 23:55:56 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Sep  6 23:55:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Sep  6 23:55:56 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Sep  6 23:55:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Sep  6 23:55:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673880101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 00:24:01 2012] Spatial fit model total counts = 341.469000, observed total counts = 310.000000
[Fri Sep  7 00:24:01 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 00:24:01 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 00:24:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 00:24:01 2012] Assessing source extent using major
[Fri Sep  7 00:24:01 2012] Source does appear to be extended
[Fri Sep  7 00:24:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 00:57:48 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:57:48 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Fri Sep  7 00:57:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.822
[Fri Sep  7 00:57:48 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.82"
[Fri Sep  7 01:16:37 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Sep  7 01:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10.csv
[Fri Sep  7 01:16:37 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Sep  7 01:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10.csv
[Fri Sep  7 01:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:16:37 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep  7 01:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Sep  7 01:16:37 2012] fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep  7 01:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Sep  7 01:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673880101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:37:59 2012] Spatial fit model total counts = 349.552000, observed total counts = 310.000000
[Fri Sep  7 01:37:59 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 01:37:59 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 01:37:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 01:37:59 2012] Assessing source extent using major
[Fri Sep  7 01:37:59 2012] Source does appear to be extended
[Fri Sep  7 01:37:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:01:58 2012] XMMSAS src. selection expression = ellipse(31428.462677, 24322.236938, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep  7 02:01:58 2012] Writing source region out to fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22_src.reg
[Fri Sep  7 02:01:58 2012] Extracting stamp from image fullrun_mos1_xmm0673880101_pi300-10000_cl_sm2.00.img.gz, (324, 243) - (399, 318)
[Fri Sep  7 02:01:58 2012] XMMSAS bgd. selection expression = annulus(31428.462677, 24322.236938, 1087.500000, 2175.000000, X, Y) && !ellipse(33630.950195, 24434.326965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34414.295349, 26613.920166, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 02:01:58 2012] Writing fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22.gif
[Fri Sep  7 02:03:51 2012] Mean detx,y = (-5122.29, 2958.78) 
[Fri Sep  7 02:03:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 02:04:02 2012] grppha failed
[Fri Sep  7 02:04:02 2012] Setting source spectrum file to fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22_src.pi.gz
[Fri Sep  7 02:04:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Sep  7 02:07:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 02:07:38 2012] rmf not generated due to insufficient counts
[Fri Sep  7 02:13:00 2012] Updating aperture counts using extracted products
[Fri Sep  7 02:13:00 2012] Error reading totcts from fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22_src.pi.gz
[Fri Sep  7 02:13:01 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 02:13:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 02:13:03 2012] xmm0673880101/analysis//spectral/fullrun_mos1_xmm0673880101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete