[Sun May 26 07:44:34 2013] Detection parameters:
  Position = (261.0, 271.6) = 17 50 24.16 35 4 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.5 +/- 45.7
  Background counts = 240.1
  Rate = 0.01 +/- 0.001

[Sun May 26 07:44:35 2013] Off-axis axis estimate = 3.34'
[Sun May 26 07:49:27 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sun May 26 07:49:27 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sun May 26 07:49:27 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Sun May 26 07:49:27 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.10"
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 26 09:19:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3.csv
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 26 09:19:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3.csv
[Sun May 26 09:19:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 26 09:19:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 26 09:19:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 26 09:19:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 11:01:03 2013] Spatial fit model total counts = 1642.060000, observed total counts = 1277.000000
[Sun May 26 11:01:03 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 11:01:03 2013] Vigneting correction estimate = 1.000000
[Sun May 26 11:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 11:01:03 2013] Assessing source extent using major
[Sun May 26 11:01:03 2013] Source does appear to be extended
[Sun May 26 11:01:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 11:01:03 2013] Source is confused with source 5
[Sun May 26 11:01:03 2013] Source is confused with source 22
[Sun May 26 11:01:26 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sun May 26 11:01:26 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sun May 26 11:01:26 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Sun May 26 11:01:26 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.10"
[Sun May 26 11:54:49 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3.csv
[Sun May 26 11:54:50 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3.csv
[Sun May 26 11:54:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 11:54:50 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 26 11:54:50 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 26 11:54:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 13:08:51 2013] Spatial fit model total counts = 1611.300000, observed total counts = 1277.000000
[Sun May 26 13:08:51 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 13:08:51 2013] Vigneting correction estimate = 1.000000
[Sun May 26 13:08:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 13:08:51 2013] Assessing source extent using major
[Sun May 26 13:08:51 2013] Source does appear to be extended
[Sun May 26 13:08:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:09:09 2013] XMMSAS src. selection expression = ellipse(22662.328552, 23581.597931, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 13:09:09 2013] Writing source region out to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_src.reg
[Sun May 26 13:09:09 2013] Extracting stamp from image fullrun_pn_xmm0673851501_pi300-10000_cl_sm2.00.img.gz, (224, 234) - (299, 309)
[Sun May 26 13:09:09 2013] XMMSAS bgd. selection expression = annulus(22662.328552, 23581.597931, 1087.500000, 2175.000000, X, Y) && !ellipse(24484.655870, 24471.981600, 931.536027, 794.365623, 344.458926, X, Y) && !ellipse(23441.664000, 23552.212000, 1311.368038, 1311.368038, 0.000000, X, Y) && !ellipse(24304.466827, 23217.967773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.810089, 26207.881226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.168000, 25585.336000, 1850.336053, 1850.336053, 0.000000, X, Y) && !ellipse(22050.808929, 24573.216858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.269989, 22984.139343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.312866, 23024.506409, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 13:09:09 2013] Writing fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3.gif
[Sun May 26 13:13:41 2013] Mean detx,y = (1592.88, -1532.59) 
[Sun May 26 13:13:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 13:14:23 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 13:14:24 2013] Setting source spectrum file to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 26 13:14:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 26 13:35:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 13:35:13 2013] rmf not generated due to insufficient counts
[Sun May 26 16:50:03 2013] Updating aperture counts using extracted products
[Sun May 26 16:50:03 2013] Total counts from fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 839.00
[Sun May 26 16:50:03 2013] Total counts from fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1148.00
[Sun May 26 16:50:03 2013] Got source and background scale factors 1087740.000000, 3632723.000000
[Sun May 26 16:50:03 2013] User source parameters:
  Position = (261.0, 271.6) = 17 50 24.16 35 4 31.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 495.3 +/- 30.0
  Background aperture counts = 343.7
  Rate = 0.03 +/- 0.002

[Sun May 26 16:50:03 2013] Updating counts from extracted products
[Sun May 26 16:50:03 2013] Set source signif. to 495.26/18.54 = 26.71
[Sun May 26 16:50:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:50:09 2013] Using photon index=1.80, rate=0.0277, arf fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3.arf
[Sun May 26 16:50:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:50:09 2013] Updating source flux to 7.7e-14
[Sun May 26 16:50:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:50:24 2013] xmm0673851501/analysis//spectral/fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete